ChemComm Milestones – Naoyuki Shimada

We are excited to share the success of Naoyuki Shimada’s first-time independent article in ChemComm; “Catalytic dehydrative amide bond formation using aqueous ammonia: synthesis of primary amides utilizing diboronic acid anhydride catalysisincluded in the full milestones collection. 

Read our interview with Naoyuki below.

What are the main areas of research in your lab and what motivated you to take this direction?

My research focuses on the development of efficient synthetic methodologies taking advantage of the properties of organoboron compounds. Specifically, the development of amide bond and peptide bond formation reactions based on the electrophilic activation of carboxylic acid derivatives utilizing multi-organoboron catalysts, and the development of site-selective functionalizations and glycosylations of carbohydrates based on the nucleophilic activation of hydroxyl groups utilizing Lewis base-containing organoboron catalysts. My motivation for promoting the research is that organoboron compounds exhibit interesting and diverse reactivities, and that the development of new organoboron catalysis has the potential to lead to the efficient synthesis of bioorganic molecules such as peptides, sugar chains, and glycolipids.

Can you set this article in a wider context?

Primary amides are important chemical linkages found in many pharmaceuticals, agricultural chemicals, and bioactive natural products. So, the development of efficient synthetic methodologies for primary amides are in high demand. Although many synthetic approaches of primary amides have been developed, the direct amidation of readily available carboxylic acids with ammonia equivalents is one of the most direct approaches. Moreover, inexpensive and safe aqueous ammonia is the ideal ammonia equivalent. A wide variety of organoboron-catalyzed dehydrative amidations have been developed to synthesize secondary and tertiary amides. However, these have been difficult to apply to the synthesis of primary amides using aqueous ammonia because common organoboron catalysis requires dehydrative operations such as the addition of dehydrating agents or azeotropic reflux to remove water. In this study, my research group reported the development of a catalytic synthesis of primary amides by dehydrative condensation of a-hydroxycarboxylic acid or b-hydroxycarboxylic acids with aqueous ammonia. The key to the success of this research is the use of my unique diboronic anhydride (DBAA) catalyst.

What do you hope your lab can achieve in the coming year?

In this report, it was clarified that the dehydrative amide condensations proceed even under hydrous conditions using aqueous ammonia as the amine substrate by utilizing diboronic anhydride catalyst (DBAA), so in the future, I would like to challenge the development of a dehydrative condensation in aqueous media. Since the development of a reaction that proceeds even at lower temperatures without any dehydrative operations is also another challenge, I would like to overcome this problem by creating new diboronic acid anhydride catalysts. Finally, I hope that the first graduate students in my lab will complete their degrees and work as researchers.

Describe your journey to becoming an independent researcher.

My journey started with the development of Brønsted acid catalysis in water utilizing water-soluble calix arenes as inverse phase-transfer catalysts under the supervision of Prof. Shoichi Shimizu at Nihon University (“Mannich-type reactions in water using anionic water-soluble calixarenes as recoverable and reusable catalysts; Green Chem., 2006, 8, 608–614; DOI: https://doi.org/10.1039/B603962F”). During that time, I experienced the wonders of scientific research and obtained my Master’s degree in engineering. After that, I joined the research group of Prof. Shunichi Hashimoto at Hokkaido University to develop the enantioselective carbon–carbon bond formation reactions using dirhodium catalysts incorporating N-phthaloyl amino acids as chiral bridging ligands (Hashimoto catalyst). After I received my Ph.D. at Hokkaido, I spent two years as a postdoctoral researcher in Prof. Tius’ research group at the University of Hawaii, where I developed an asymmetric Nazarov cyclization reaction. In this way, my experience in developing catalytic reactions with different approaches, such as reaction processes, catalysts, and reactions, has become my asset as a researcher. After returning to Japan, I worked in the Prof. Makino research group at Kitasato University, developing catalytic reactions utilizing the unique reactivities of organoboron compounds, and received the Pharmaceutical Society of Japan Division of Organic Chemistry Award in 2021. I got the opportunity to start my independent research group in the department of chemistry and moved to Nihon University in April 2022.

What is the best piece of advice you have ever been given?

“A person cannot live alone. People live by being supported by many people and things. The only way to repay that kindness is to nurture people and make use of things.” This is the advice I got from my great-grandfather who was a monk when I was in elementary school.

Why did you choose to publish in ChemComm?

ChemComm is one of the leading journals in chemical science, publishing new and important findings in short communications. ChemComm has readers all over the world, because of its long history and high reliability. A rapid peer review system is also attractive to researchers. In addition, ChemComm was the first paper for Professor Shimizu, the birth father of my research, after starting his new independent research project (“Water-soluble calixarenes as new inverse phase-transfer catalysts. Nucleophilic substitution of alkyl and arylalkyl halides in aqueous media; Chem. Commun., 1997, 1629–1630; DOI: https://doi.org/10.1039/A704347C”). After starting my own independent research group, I wanted to publish my first paper in ChemComm.

Naoyuki Shimada obtained his B.Eng. in 2001, and M.Eng. in 2003 from Nihon University under the guidance of Prof. Shoichi Shimizu. He received his Ph.D. in 2007 from Hokkaido University under the supervision of Prof. Shunichi Hashimoto. After that, he worked as a Research Associate and an Assistant Professor (non-tenure) at Hokkaido University, he joined Prof. Tius’ Research Group at University of Hawaii at Manoa as a Postdoctoral Researcher in 2009. He returned to Japan as an Assistant Professor at Kitasato University in 2011, and was promoted to Junior Associate Professor in 2019. He moved to the Department of Chemistry, Nihon University as a Principal Investigator in 2022. He received the Kaneka Award in Synthetic Organic Chemistry, Japan, Pharmaceutical Society of Japan Division of Organic Chemistry Award, and the UBE Young Researcher Award. His research interest is the development of organic reactions using organoboron catalysts and their application to the synthesis of biological molecules.

 

Group website: https://www.shimadalab.org/en

Explore more ChemComm Milestones news and updates on our Twitter: @ChemCommun

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Josep Cornella: Winner of the ChemComm Emerging Investigator Lectureship 2022/23!

On behalf of the ChemComm Editorial Board, we are pleased to announce the winner of the 2022/23 ChemComm Emerging Investigator Lectureship – Josep Cornella! Our warmest congratulations to Josep!
 
Josep Cornella join recent past winners  Keary Engle (2021), Thomas Bennett (2021) and Bill Morandi (2020). Learn more about Josep below.

Josep Cornella (Pep) is a Max Planck Group Leader in the Department of Organometallic Chemistry at the Max-Planck-Institut für Kohlenforschung in Mülheim an der Ruhr, Germany. He received  his PhD in 2012 from Queen Mary University of London, where he worked with  Prof. Igor Larrosa on the use of aromatic carboxylic acids as aryl donors in metal-catalyzed decarboxylative reactions. He then moved back to Catalunya as a Marie Curie Postdoctoral Fellow with Prof. Ruben Martin (ICIQ) and further received a Beatriu de Pinós Fellowship in 2015 to carry out further postdoctoral studies in the group of Prof. Phil S. Baran at The Scripps Research Institute, California, USA.

He joined Max-Planck-Institut für Kohlenforschung in spring 2017 and in summer of the same year, he obtained a Max Planck Research Group Leader (MPRGL) position in the same Institute to create and lead the Sustainable Catalysis Laboratory. His research group interests span from the invention of new catalytic transformations to the design of novel catalysts to uncover previously unknown pathways. You can learn more about Josep’s group and his research on Twitter @CornellaLab

As part of the Lectureship award, Josep will be presenting lectures over the coming 12 months. Details of the lectures will be announced in due course but keep an eye on Twitter @ChemCommun for details!

 

Highly Commended Nominations

Each year, a large number of excellent researchers gets nominated for the ChemComm Emerging Investigator Lectureship award. Due to the extremely high standard of nominations this year, we have decided to select a number of Highly Commended candidates, who the Editorial Board highlighted as performing exceptional science and deserving of recognition in the community.

 

 

Shoubhik Das received his PhD from the group of Prof. Matthias Beller in the Leibniz Institute of Catalysis (LIKAT), Germany. After finishing his PhD, he joined the group of Prof. Matthew Gaunt at the University of Cambridge for postdoctoral fellowship’ followed by working with Prof. Paul Dyson in EPFL, Switzerland. In August 2015 he received the ‘Liebig Fellowship’ to start his independent research career at the University of Göttingen, Germany. Followed by this, he accepted the Assistant Professor position in the Department of Chemistry at the University of Antwerp, Belgium in November 2019. In August 2023, he will be joining as the full professor in the Department of Chemistry at the University of Bayreuth, Germany.

Follow Shoubhik’s research on Twitter @shoubhikdas4

 

 

 

Ellen Matson obtained her PhD from Purdue University under the supervision of Prof. Suzanne C. Bart studying the synthesis of low-valent uranium alkyl complexes. Subsequently, Ellen performed postdoctoral research with Prof. Alison R. Fout at the University of Illinois at Urbana Champaign.  Ellen began her independent career at the University of Rochester in 2015; the Matson Laboratory studies the synthesis and reactivity of metal chalcogenide clusters as model systems for surfaces and redox active metalloligands. Ellen has received multiple awards recognizing her research accomplishments as an independent investigator; these include a Sloan Research Fellowship (2019), a Cottrell Award (2019), and the Camille Dreyfus Teacher-Scholar Award (2020). Most recently, Ellen was named the Kavli Foundation Emerging Leader in Chemistry (2022).

Follow Ellen’s research on Twitter @MatsonLab

 

 

 

Sophie Rousseaux obtained her PhD from University of Ottawa working with Prof. Keith Fagnou on Pd-catalyzed aliphatic C–H bond functionalization reactions. In 2010, she moved to MIT to complete her graduate research with Prof. Stephen L. Buchwald. She was a NSERC postdoctoral fellow and Glasstone Research Fellow at University of Oxford from 2012–2015, where she worked with Prof. Harry L. Anderson. Sophie joined the Department of Chemistry at the University of Toronto in 2015 where she currently is an Associate Professor and also holds a Canada Research Chair (Tier 2) in Organic Chemistry since 2016. Her group’s research interests include organic synthesis, catalysis, and organometallic chemistry, with a particular focus on the synthesis of small rings and nitrile-containing molecules. Her group’s work has been recognized by several awards including the CSC Keith Fagnou Award (2023), the McLean Research Fellowship (2022), the Organic Letters Outstanding Publication of the Year Lectureship (2022), a Sloan Research Fellowship (2021), an Ontario Early Researcher Award (2021), and the Dorothy Shoichet Women Faculty Science Award of Excellence (2020).

Follow Sophie’s research at @RousseauxGroup or her department’s Twitter handle @chemuoft

Keep up-to-date with our latest journal news on Twitter @ChemCommun or via our blog! Learn more about ChemComm online!

Sign up for a Chemistry Briefing: if you would like to stay informed about new resources and publishing updates, please opt in to our email newsletter.

                                                                                    

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

ChemComm Milestones – Weijin Li

We are excited to share the success of Weijin Li’s first-time independent article in ChemComm; “Bionic electroluminescent perovskite light-emitting device” included in the full milestones collection. 

Read our interview with Weijin below.

What are the main areas of research in your lab and what motivated you to take this direction?

My lab’s research areas include open framework materials (e.g. metal-organic frameworks, hydrogen organic frameworks), thin films and their electrical (e.g. dielectric)/ luminescent/sensing properties. Focus on the scientific questions inside the energy conversion, I am motivated to take the direction of dielectric control of open framework materials and film assembly. By controlling the dielectric constant and consumption, we aim to design either high-dielectric materials for energy storage or dielectric materials for electromagnetic radiation shielding. Besides, human health will face a great threat if one contacts polluted gas, water and some other agents. Inspired by the sensing mechanism of open framework materials based on a dielectric or luminescent behaviour change, we will also take the direction of dielectric and luminescent materials for sensing devices.

Can you set this article in a wider context?

The novelty of this work is in its configuration of fluorescent films. The ultrafast dynamic color change with ultra-high-definition flat panel display was realized in a simple and facile way based on perovskite light-emitting-diodes (PeLED). A PeLED displaying green color is combined with a brown fluorescent coating layer to form a hybrid FC-PeLED system. The FC-PeLED system can simulate the complete cycle of bionic plant colors from green to yellow through low energy (<0.6 mW) input. Thanks to the low-power-consumption/high-brightness of the PeLED and the color adjustability of the fluorescent layer, we built a new type of bionic electroluminescence system (FC-PeLED). The bionic process for the entirely natural process of ginkgo leaves realized by the obtained FC-PeLED will promote the future development of low-cost and low-power consumption bionic technology.

What do you hope your lab can achieve in the coming year?

In the coming year, we hope to develop crystalline coordination polymers with fast bionic color change at the stimulation of an electrical field and reveal the electrochromic mechanism. Focus on our research direction, both theoretical and experimental insights of dielectric materials based on conductive coordination polymers are going to be brought to light in the coming year.

Describe your journey to becoming an independent researcher.

I obtained my PhD degree under the supervision of Prof. Rong Cao (NSFC distinguished professor) at the Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences in 2015, where my thesis was “Preparation and properties of carboxyl-based metal-organic frameworks film”. Since 2016, I join Prof. Cao’s lab in Xiamen University, with the close collaboration of Prof. Xinchen Wang at Fuzhou University and Prof. Lasheng Long and Prof. Jun Tao at Xiamen University, on the topic of dielectric properties of metal-organic framework thin film. After a one-year postdoctoral stay at Xiamen University, I joined Prof. Roland A. Fischer’s group at the Chair of Inorganic and Metal-organic Chemistry, Department of Chemistry, Technical University of Munich, Germany (2016-2021), under funding support from the Joint Chinese Scholarship Council-German Academic Exchange Service (CSC-DAAD), an Alexander von Humboldt fellowship and German Research Foundation (DFG), and worked on preparation and study of metal-organic framework thin film for electrocatalysis. I was awarded the Japan Society for the Promotion of Science Fellowship under the host of Prof. Takuzo Aida in Riken with the research on “mass transport in two-dimensional nanospace formed by polymeric nanosheets”. Unfortunately, due to the 2019-coro pandemic situation, I was unable to join Prof. Aida and just worked with Prof. Aida and colleagues online for some research exchanges and discussions. By chance, I was granted an Overseas High-level Recruitment of Talents-Youth Project in 2021. Then, I began my independent Professorship at the School of Materials Sciences and Engineering, Nanjing University of Science and Technology with an interest in open framework materials and their dielectric/luminescent/sensing properties.

What is the best piece of advice you have ever been give?

“Perseverance is helpful for researchers since it is common that researcher obtains more negative results than good results.”

Why did you choose to publish in ChemComm?

I published a work “patterned growth of luminescent metal-organic framework film: a versatile method for electrochemical-assisted microwave deposition” and also see recent publications in ChemComm related luminescent materials. Consideration of the novelty of my work, thus I decide to submit it to ChemComm.

Weijin Li received his Ph.D. at Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences in 2015. During six years of postdoctoral experience across Xiamen University, China (2015-2016) and Technical University of Munich, Germany (2016-2021), Weijin received the research awards of an Alexander von Humboldt fellowship and Japan Society for the Promotion of Science. Granted Overseas High-level Recruitment of Talents-Youth Project, Weijin began his independent Professorship at the School of Materials Sciences and Engineering, Nanjing University of Science and Technology in 2021. His research interest focuses on inorganic and organic hybrid materials and their dielectric/luminescent/sensing properties.

Researchgate: https://www.researchgate.net/profile/Weijin-Li

Explore more ChemComm Milestones news and updates on our Twitter: @ChemCommun

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

ChemComm Milestones – Zhen Jiang

We are excited to share the success of Zhen Jiang’s first-time independent article in ChemComm; “Designing strong, fast, high-performance hydrogel actuators” included in the full milestones collection. 

Read our interview with Zhen below.

What are the main areas of research in your lab and what motivated you to take this direction?

In my project, harnessing the power of organic/polymer chemistry, we are designing and synthesizing new polymeric materials that could shape the future of soft robotics. The created polymers can change their shape or size in response to stimuli like electricity, heat, light, chemical or pH. We are very passionate about this research because we believe that expansion of the capabilities of soft robotics requires new synthetic polymeric materials.

Can you set this article in a wider context?

A key component in soft robotic devices is soft actuators which can transduce energy into mechanical motions. Among all of the soft actuator materials, hydrogels absorbing large amounts of water are particularly promising to be integrated into soft robotics, due to their tissue-like softness, and ability to undergo large deformations. However, there are substantial shortcomings that limit their performance and real-world applications.

In this Highlight, we discuss the recent advances in material designs to address pre-existing limitations in hydrogel actuators such as poor mechanical properties, slow actuation speed and limited actuation performance. We also comment on the important role of synthetic chemistry in creating hydrogel actuators with improved material performance and exceptional functionalities. It is thus anticipated that our article can spark great interest among chemistry community in developing advanced materials for soft robots.

What do you hope your lab can achieve in the coming year?

In the next few years, using molecular design principles, we will focus on synthesizing advanced soft actuator materials exhibiting a unique combination of high-power actuation, excellent mechanical properties and good processability.

Describe your journey to becoming an independent researcher.

I did my Master in Material Science at Fudan University, China. I was trained with extensive organic chemistry skills to synthesize functional small molecules/polymers and learned how to design photodeformable polymers. Then I went to University of Queensland for my PhD study, working on a number of projects related to synthetic polymers while aiming for different applications including high-resolution lithography, functional nanopatterns and soft actuators. These research experience enable me to develop a high level of independence which lay foundation for my current project. In 2022, I was awarded an Australian Research Council Discovery Early Career Researcher Award (ARC DECRA) to broaden my network and mature as an independent researcher.

What is the best piece of advice you have ever been give?

The best advice I have received is probably from my Master supervisor Prof. Yanlei Yu at Fudan University “Opportunities are only for those who are prepared”. This advice helps me get through the tough time in my research career, and keeps me optimistic and have faith.

Why did you choose to publish in ChemComm?

As a polymer chemist, I am a regular reader of ChemComm which is one of the best journals in the field of chemical science. The reviewer’s comments are very helpful in improving the quality of submitted manuscripts. I am also especially impressed by its strong support to early career researchers.

Zhen Jiang is an early-career polymer chemist, specializing in designing and synthesizing stimuli-responsive soft materials for soft robotics and artificial muscles. He received his B.Eng. in Polymer Science and Engineering from Donghua University in 2011, his M.Eng. in Materialogy from Fudan University in 2014, and his Ph.D. in Polymer Science from The University of Queensland in 2018. In 2022, he received Discovery Early Career Researcher Award (DECRA) from Australian Research Council (ARC) to advance his research career. His research interests include soft actuators, liquid crystalline elastomers, hydrogels, and photo-responsive polymers.

Explore more ChemComm Milestones news and updates on our Twitter: @ChemCommun

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

ChemComm Milestones – Dinesh Shetty

We are excited to share the success of Dinesh Shetty’s first-time independent article in ChemComm; “Salicylaldehydate coordinated two-dimensional-conjugated metal–organic frameworks” included in the full milestones collection. 

Read our interview with Dinesh below.

What are the main areas of research in your lab and what motivated you to take this direction?

We are working on designing tunable porous materials for energy and water purification applications. The major focus is to develop framework materials/membranes for emerging water pollutants removal and also for desalination via capacitive deionization. In parallel, we are working on both photocatalytic and electrocatalytic framework materials for CO2 and N2 conversion, battery, and supercapacitor. The motivation is stemming from the fact that both focused research areas are socially relevant and need of the time.

Can you set this article in a wider context?

The novelty of this work is in its simplicity. The building block that we utilized for the construction of conjugated MOFs can be synthesized economically and the method we followed is green (first time in c-MOFs synthesis). The advantage of these combinations helping us to scale up and utilize these interesting materials in many applications.

What do you hope your lab can achieve in the coming year?

We are in the direction of achieving an interesting efficient framework system (both covalent organic frameworks and conjugated metal organic frameworks) that can be useful in energy conversion and water purification. We are on the path to developing a scaleup fabrication setup for above mentioned materials, which will help us to achieve the path of real-life applications (in a way commercialization)

Describe your journey to becoming an independent researcher.

It was a rough one but I started to appreciate it more now. It took 8 years after my PhD to get an independent position, however, those years of experience in interdisciplinary fields and spending time with world-renowned scientists really helped me to shape my career. The journey also helped me to gain my trust in the relevance of perseverance and hard work to achieve your dreams. Another advantage of my journey is learning multicultural scientific environment (I spent time in India, USA, and South Korea before starting my independent career), which is greatly helping me to supervise a group of scientists and students coming from different parts of the world.

What is the best piece of advice you have ever been give?

It was from my parents: ‘Your knowledge should not be judged by your medals/laurels but should be judged by how it helps solve the social problems

Why did you choose to publish in ChemComm?

Firstly, it is one of the best short communications journals: readers friendly and has sharp scientific ideas and broad-readership. Secondly, it is close to my heart as I published a major part of my PhD work in this journal many years ago.

Dr. Dinesh Shetty is an Assistant Professor of Chemistry in the College of Arts and Science, Khalifa University since fall-2019. He holds Ph.D. in chemistry from Seoul National University (SNU), South Korea. From 2011 to 2013, he was a postdoctoral fellow at Winship Cancer Institute, Emory University, USA, and later moved back to South Korea in the year 2013 where he was a research fellow in the group of Professor Kimoon Kim at the Center for Self-assembly and Complexity, Institute for Basic Science, POSTECH. In 2016, he moved to New York University Abu Dhabi as a research scientist. He is a trained chemist with experience in multidisciplinary research areas including material science, porous materials, renewable energy, water purification, supramolecular chemistry, and biomedical science. He is the author of 53 peer-reviewed journal papers, >30 conference papers, 21 invited talks, and 6 patents with an h-index of 27.

He received Young Investigator Award from the Korean Society of Nuclear Medicine and the Best Researcher Award from the Korean Cancer Research Foundation. He is the recipient of the US National Academy of Science Arab-American Frontiers seed grant. His author profile was recently introduced by Angewandte Chemistry International Edition, a flagship chemistry journal. He delivered research talks in multiple countries and is currently an active member of the Royal Society of Chemistry under the Future Leaders in the Filed category. In his free time, he writes poems and newspaper column articles and also podcasts his thoughts. His research interest is focused on the development of multifunctional materials for various applications including energy, water purification, and biomedical applications.

A list of publications can be found at:

Google Scholar: https://scholar.google.com/citations?hl=en&user=QVgucAQAAAAJ&view_op=list_works&sortby=pubdate

Explore more ChemComm Milestones news and updates on our Twitter: @ChemCommun

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Celebrating 10 years of ChemComm Emerging Investigators

We recently celebrated 10 years of ChemComm‘s Emerging Investigators collection. Begun in 2011, this annual collection showcases high quality research being carried out by international researchers in the early stages of their independent careers. After 10 years, we continue to be overwhelmed by the community’s positive response to this collection and look forward to continuing to champion researchers at the early stages of their careers and beyond.

 

To mark the 10 year anniversary, we recently published an anniversary collection featuring new work from contributors to the early Emerging Investigator collections. We hope you will enjoy reading these articles marking this special occasion.

 

ChemComm is proud to support researchers at all stages of their careers. Whether you’re a first-time author or a senior academic, you can trust us to handle your submission fairly and efficiently.

 

We’d like to thank all contributors to our Emerging Investigators collections throughout the years, and hope that you will join us in celebrating their successes!

 

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

ChemComm Milestones – Kourosh Ebrahimi

We are excited to share the success of Kourosh Ebrahimi’s first-time independent article in ChemComm; “VITAS, a sensitive in vivo selection assay to discover enzymes producing antiviral natural productsincluded in the full milestones collection. 

Read our interview with Kourosh below.

What are the main areas of research in your lab and what motivated you to take this direction?

My lab research areas include Bioinorganic Immunology and Drug Discovery. We elucidate the function of metalloenzymes and iron-sulfur [FeS] clusters, one of the oldest bioinorganic cofactors of life, and [FeS] containing proteins in the immune response. We use the outcome of our work to design and engineer biological systems for synthesizing and developing novel therapeutics. We apply a multidisciplinary approach combining protein engineering, biochemical and biophysical techniques, molecular biology, and cell biological methods.

Can you set this article in a wider context?

The idea of the VITAS assay described in the article initially came to me in 2017, and I included the idea in an ERC starting grant. The available assays to discover enzymes producing antiviral natural products (NPs) are multi-step with a high risk of failure at each step: (i) Identification and selection of desired enzymes among the unlimited natural library of enzymes, which is a random process. (ii) Expression and purification of a functional enzyme, which is not straightforward, especially in the case of oxygen-sensitive [FeS] proteins. (iii) Identification and discovery of the correct substrates of enzymes and the NPs they produce. (iv) Purifying the NPs and confirming the antiviral activity using biochemical or cell-based assays. Consequently, the discovery of new antiviral enzymes and NPs is practically a random process with a very high risk of failure.

We developed VITAS (the Latin word for leaving), an in vivo selection assay for identifying enzymes producing antiviral lead NPs to solve the challenge. The assay is based on a simple concept: a commonly used bacterium in the lab, namely E. coli, should die if an antiviral enzyme is absent inside the cells. We engineered the bacterium so that it generates a toxin protein in the absence of an antiviral enzyme. This live/dead assay will enable us to rapidly screen many enzymes among the repository of natural proteins and a library of variants generated using protein engineering. When the assay is coupled with other methods like liquid chromatography-mass spectrometry, we can identify and discover novel antiviral lead NPs produced by enzymes.

What do you hope your lab can achieve in the coming year?

In the coming years, we hope to decode the molecular mechanism underlying the activity of a conserved antiviral response, discover new antiviral molecules, and design and create revolutionary approaches to antiviral therapeutics. This work is a milestone in our path to achieving our goals.

Describe your journey to becoming an independent researcher.

My journey has been unique. I did my Bachelor’s studies in Chemical Engineering, Petroleum Process Design. After my graduation, an unexpected and sudden accident changed everything. Because of that event, I decided to continue my studies in Biochemistry to understand the molecular mechanism of diseases like cancer. Yet, my first stop was working in the industry to help support my career ambitions. After five years, I found the opportunity to start my M.Sc. and, subsequently, PhD studies, both under the supervision of Prof Wilfred Hagen, TU Delft. I developed a passion for fundamental science and the mechanism of function of metalloenzymes. After my PhD, I did a one-year Postdoc in Virology at the Scripps Research Institute, Florida, USA, with Prof Michael Farzan. I returned to TU Delft and received a two-year fellowship from the European Molecular Biology Organization (EMBO) to move to the University of Oxford. I joined the group of Prof Frazer Armstrong. I initiated multiple collaborations with various groups across the University, including with Prof William James (Sir William Dunn School of Pathology) and Prof James McCullagh (Department of Chemistry). With their support, I developed my research niche at the interface of Bioinorganic Chemistry and Immunology/Virology. After six years working at Oxford, in October 2021, I joined the Institute of Pharmaceutical Sciences at King’s College London to start my independent career and establish my research group.

What is the best piece of advice you have ever been give?

A good scientist does everything possible to disprove their theories.

Why did you choose to publish in ChemComm?

After finalizing the draft of our manuscript, I was looking for a possible venue among highly respected journals in the field. While visiting the Chemical Communications website, I came across the Journal collection ‘ChemComm Milestones – First Independent Articles’. I was excited to see the support and recognition the Journal provides new investigators. I decided to submit our article to Chemical Communications without any second thought.

  I was born (on 26th December 1979) in Kerman, a small city near a desert in the south of Iran. After finishing my Bachelor’s studies, I worked in the petrochemical industry for five years. Subsequently, I received a scholarship from Delft University of Technology (TU Delft), the Netherlands, and did my M.Sc. and later PhD studies there. My PhD was followed by a postdoc at the Scripps Research Institute and then one at TU Delft. I received an EMBO fellowship and moved to Oxford at the end of 2015. In October 2021, I joined the Institute of Pharmaceutical Science at King’s College London as a Lecturer (Assistant Professor) in Immunology and Drug Discovery.

 

Social Handles: @Kouroshhe; @FeSImmChemNet; @kingsmedicine

Explore more ChemComm Milestones news and updates on our Twitter: @ChemCommun

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

ChemComm Milestones – Kun Jiang

We are excited to share the success of Kun Jiang’s first-time independent article in ChemComm; “Top-down manufacturing of efficient CO2 reduction catalysts from the gasification residue carbon” included in the full milestones collection. 

Read our interview with Kun Jiang below.

What are the main areas of research in your lab and what motivated you to take this direction?

My group research focuses on the precise electrochemical synthesis, especially on the selective electrocatalytic conversion of atmosphere molecules like O2/CO2/H2O into value-added chemicals and fuels. Aiming at this target, our lab has two primary research themes: 1) developing highly sensitive spectroelectrochemical techniques for operando interfacial study during these reactions, shedding light on the complex reaction pathways and the potential tuning knobs of local reaction environment; 2) rational design of gas diffusion electrode based electrochemical reactors with the insights from online diagnosis toward a more efficient energy conversion.

We believe such a synergetic approach from fundamental surface electrochemical investigation and practical pilot device validation could pave the development of more efficient electrosynthesis systems, aiding to envision the sustainable neutral carbon cycle.

Can you set this article in a wider context?

Electrochemical CO2 reduction reaction (CO2RR) has provided a promising route to close the anthropogenic carbon cycle by storing renewable electricity within greenhouse gas molecules and generating fuels and commodity chemicals. Among various aqueous CO2RR products, CO is a simplest 2e product with a projected cost of $0.44 kg–1, making the electrochemical CO2-to-CO route be competitive to conventional processes and holding great significance for the chemical industry. In a recent work, we have demonstrated the role of local reaction environment, especially the electrode–electrolyte interface and the relevant hydrodynamic boundary layer in the vicinity of the cathode, in defining the activity and selectivity for Ag catalyzed CO2-to-CO conversion (Energy Environ. Sci., 2022, 15, 749-759).

Along this line, we have developed a “top-down” strategy to manufacture Ni-N-C active motif enriched carbon catalysts rather than the coinage metal of Ag, for a selective and stable CO2-to-CO conversion at ~45 LCO gcatalyst-1 h-1 for more than 50-h continuous electrolysis at ambient condition. More importantly, we started the single atom catalyst fabrication from the raw material of gasification residue carbon from heavy hydrocarbon feedstock, demonstrating a carbon neutral cycle driven by a “solid carbon waste”.

What do you hope your lab can achieve in the coming year?

Currently we’re working on modulating local reaction environment toward selective CO2-to-C2+ conversion. Both fundamental insights from advanced spectroelectrochemical techniques and practical electrolyzer performance optimization are going to be brought to light this year.

Describe your journey to becoming an independent researcher.

After finishing my undergraduate study of applied chemistry at Jinan University, I started my academic research in physical chemistry with Prof. Wen-Bin Cai at Fudan University. The dynamic interfacial electrochemistry of Pd catalyzed HCOOH dehydrogenation versus dehydration pathway ignited my passion for spectroelectrochemistry investigations.

After I finished my Ph.D in 2016, I took postdoctoral trainings with Prof. Haotian Wang at Harvard University, and with Prof. Alexis T. Bell at LBNL/UC Berkeley, for which I stayed focus on the cutting edge research field of electrochemically converting “CO2 waste” into value-added chemicals and fuels with green energy input. These experiences have broadened my research area from surface electrochemistry into material science and chemical engineering, which granted me a widened academic horizon and collaboration.

Also based on these research experience, I took the PI position at SJTU and back to my home country in late 2019.  I currently lead a small group of 3 Ph.D candidates and 2 graduate students with a diverse education background of Mechanical Engineering, Chemical Engineering and Applied Chemistry, working on the emerging interdisciplinary research topics bridging the fundamental researches at lab with the sustainable future demands on circular carbon economy.

What is the best piece of advice you have ever been give?

In Chinese, we have a proverb saying “海纳百川,有容乃大”, which has been vividly expressed by President Bacow’s commencement remarks to the Harvard class of 2022:

To save a seat for others, to make room for others, to ensure that the opportunities afforded by your education do not enrich your life alone.

Why did you choose to publish in ChemComm?

In September of 2011, I published my very first 1st-authored research paper at ChemComm as well. The rigorous peer-review process, amazing publication time and broad readership across all fields of chemistry make the journal a fantastic platform!

Kun Jiang is currently an Associate Professor of Mechanical Engineering at Shanghai Jiao Tong University (SJTU). He obtained a Ph.D. degree in physical chemistry from Fudan University in 2016, held a Baden-Württemberg fellowship at Institute for Surface Chemistry and Catalysis, Ulm University, and completed
postdoctoral trainings at Harvard, Lawrence Berkeley Laboratory and U.C. Berkeley. In 2019, he joined the School of Mechanical Engineering, Shanghai Jiao Tong University as a Principal Investigator, with the research focus of developing advanced reactor devices and spectroelectrochemical techniques for renewable energy utilization.

Group website: https://jianglab.sjtu.edu.cn/

Explore more ChemComm Milestones news and updates on our Twitter: @ChemCommun

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

ChemComm Milestones – Shi-Qiang Wang

We are excited to share the success of Shi-Qiang Wang’s first-time independent article in ChemComm; “Adsorbate-dependent phase switching in the square lattice topology coordination network [Ni(4,4′-bipyridine)2(NCS)2]n” included in the full milestones collection. 

Read our interview with Shi-Qiang below.

What are the main areas of research in your lab and what motivated you to take this direction?

My research focuses on crystal engineering of metal-organic materials (PCPs/PCNs/MOFs) for gas storage, water sorption and hydrocarbon separations. In particular, the unusual “switching” behaviour of a series of square lattice coordination networks has fascinated me to work on this field.

Can you set this article in a wider context?

Gas storage is an important but energy-intensive process in industry. Although porous physisorbent materials hold significant promise in addressing this matter, they suffer from relatively low working capacity due to the Langmuir (type I) sorption isotherms. Flexible/switching coordination networks or MOFs featuring stepped sorption isotherms may provide higher working capacity and better thermal management than rigid sorbents with type I isotherms. However, their responsiveness to different adsorbates remains largely understudied.

In this work, we report the sorption properties of nine gases (N2, CH4, CO2, C2H2, C2H4, C2H6, C3H4, C3H6, and C3H8) for a prototypal switching coordination network, [Ni(4,4’-bipyridine)2(NCS)2] (sql-1-Ni-NCS), which exhibits adsorbate-dependent switching pressures and sorption uptakes. The primary message from this study is that nonporous materials (as determined by their crystal structures and/or 77 K N2 sorption data) should not be discarded as candidates for sorption-based applications as they may exhibit exceptionally high gas sorption working capacity through a phase switching mechanism.

What do you hope your lab can achieve in the coming year?

In the coming year, I hope we can develop a simple and cheap, sustainable and environment-friendly method for manufacturing functional metal-organic materials in large scale that meet the needs of industry and society. We are also open for potential collaborations from different perspectives to make the world better together.

Describe your journey to becoming an independent researcher.

I started my “chem journey” since I was an undergraduate at Hebei University (2009-2013) where I learnt fundamental knowledge of different chemistry disciplines (e.g., Inorganic, Organic, Analytical, and Physical Chemistry). I then majored in Inorganic Chemistry for my Master’s degree (2013-2016) and conducted systematic research under the supervision of Prof. Xiang-Jian Kong and Prof. La-Sheng Long at Xiamen University. I worked on 3d-4f metal clusters and studied their magnetism and chirality.

Although I changed my research topics to higher dimensional (2 or 3D) metal-organic materials during my PhD study, the skills I have learnt previously helped me a lot. Under the guidance of Prof. Michael Zaworotko at the University of Limerick (2016-2022), I developed a family of 2D switching coordination networks that can be potentially used for gas storage and hydrocarbon separations. Afterwards, I was fortunate to have the opportunity to work with A/Prof. Dan Zhao as a Research Fellow at the National University of Singapore where I worked on advanced porous materials for air dehumidification.

Recently, I joined the Institute of Materials Research and Engineering (IMRE), which is a leading research institute of the Agency for Science, Technology and Research (A*STAR), Singapore. As a Scientist at IMRE, I will continue my research, which is already part of my life, and hope to discover more advanced materials for real-world applications.

What is the best piece of advice you have ever been give?

Negative results can be also informative and should not be just laid aside and neglected. Unfortunately, it is common that researchers are keen on publishing the best results and pursuing new records, while it is also meaningful and important to mention what they have tried or failed before reaching the targeted goals.

Why did you choose to publish in ChemComm?

My first first-author paper was published in ChemComm in 2018 (https://doi.org/10.1039/C8CC03838D), and I was impressed by its rapid publication, excellent reputation, and broad audience. It thus prompted me to submit my first independent research (https://doi.org/10.1039/D2CC06549E) to ChemComm as well.

 

Dr. Shi-Qiang Wang (MRSC) is currently a Scientist at the Institute of Materials Research and Engineering (IMRE) under the umbrella of the Agency for Science, Technology and Research (A*STAR), Singapore. Before moving to IMRE, he served as a Research Fellow (2022.03-2022.10) in the Advanced Porous Materials Group (PI: A/Prof. Dan Zhao) at the National University of Singapore (NUS). He completed his PhD (2016.09-2020.06) and continued as a Postdoctoral Researcher (2020.08-2022.03) in the Crystal Engineering Research Group (PI: Prof. Michael Zaworotko) at the University of Limerick (UL), Ireland. He won two “Young Scientist” conference Awards sponsored respectively by the European Crystallographic Association and the International Union of Crystallography in 2018/2019 and the 2020 Chinese Government Award for Outstanding Self-financed Students Abroad.

You can reach out to Shi-Qiang on Twitter: @ShiQiang_SQ, WeChat: sqwang0123, LinkedIn: https://www.linkedin.com/in/sqwangchem or his personal website: https://sqwangchem.com/

 

Explore more ChemComm Milestones news and updates on our Twitter: @ChemCommun

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

ChemComm Milestones – Ricardo Peralta

We are excited to share the success of Ricardo Peralta’s first-time independent article in ChemComm; “Gas-phase organometallic catalysis in MFM-300(Sc) provided by switchable dynamic metal sites” included in the full milestones collection. 

Read our interview with Ricardo below.

What are the main areas of research in your lab and what motivated you to take this direction?

My research primarily aims to rationalize and develop applications for dynamic metal-ligand bonding phenomena in MOFs. I am motivated to explore these processes because I believe that to fully exploit the intrinsic characteristics of MOFs such as porosity, modular synthesis and crystallinity, the role of dynamic metal processes in fields such as catalysis must be elucidated. MOFs featuring dynamic metal-linker bonds are a promising route towards the synthesis of active and stable catalysts that do not require harsh activation conditions. The production of catalytically active MOFs often requires challenging synthesis and I believe that we have only touched the tip of the iceberg with the current research. The immense possibilities within MOF synthesis and it’s wider applications still fascinates and motivates me to pursue them.

Can you set this article in a wider context?

Using MOFs in heterogenous catalysis is advantageous due to the well-defined crystalline framework, which facilitates rapid diffusion of small molecules, high catalytic selectivity and can act as a matrix for the isolation of reactive complexes and intermediates.  Recyclability of heterogeneous catalysts provides a facile route to catalyst recovery.​ Due to high porosity and surface areas, gas phase catalysis is an area in which MOFs are particularly promising but which remains underexplored. Often MOFs featuring open metal sites are used for catalysis; however, such materials typically require harsh activation conditions and are not stable to some catalysis conditions.  The route towards gas phase catalysts proposed in this work relies on hemilability to generate temporary open metal sites in-situ without requiring harsh activation conditions.

What do you hope your lab can achieve in the coming year?

I hope that my lab can further establish the role of dynamic metal-ligand phenomena in MOFs and demonstrate the capacity of MOFs featuring hemilability in important applications.

Describe your journey to becoming an independent researcher.

My pathway to becoming an independent researcher has been challenging but entirely rewarding. Undertaking my PhD studies and postdoctoral work in Australia and Korea challenged me to develop my English communication skills and provided opportunities to learn about advanced characterization techniques in turn broadening my chemistry knowledge. I have been guided by mentors who are experts in the area and friends who have supported me through my journey. I feel incredibly lucky and proud to have an opportunity to pursue my dream as an independent researcher and continue my learning path.

What is the best piece of advice you have ever been give?

Perseverance is the key to great outcomes.

Why did you choose to publish in ChemComm?

Chemical Communications is a highly regarded journal in the chemical sciences and an excellent route to communicate new ideas and research. It has excellent readership which open up avenues to for exchange of new ideas. I have read multiple articles from journal throughout my career and it is an honor to have my first paper as an independent researcher published in ChemComm!

 

After completing my undergraduate studies, I worked in industry at DUPONT Mexico and Seguros Monterrey New York Life, which inspired me to pursue a career in research. Through my Masters program at the National University Autonomous of Mexico, I encountered Metal-organic Frameworks (MOFs) and developed a keen interest in the development and applications of crystalline materials. I moved to The University of Adelaide in Australia to conduct my PhD which focused on isolating reactive transition metal complexes in MOFs for catalytic reactions. Buoyed by my experience in MOF catalysis, I undertook a research fellowship (Brain pool program) at Daegu Gyeongbuk Institute of Science and Technology (DGIST) in South Korea, where I studied dynamic metal-ligand bonding within MOFs and its effect on catalysis. I continue to explore this fascinating phenomenon in my independent research and in my role as an Assistant Professor in Chemistry at the Metropolitan Autonomous University in Mexico.

 

Explore more ChemComm Milestones news and updates on our Twitter: @ChemCommun

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)