Archive for the ‘Hot Articles’ Category

Skipped Dienes: Stereoselective Approach to Polyene Macrocycles

C5CC02091C GA

Most organic chemists asked to imagine a macrocycle with 19 atoms in the backbone, and with three alkenes and one alkyne, would likely place at least two of the alkenes in conjugation, especially if they were familiar with macrolide antibiotic rifamycin

Conjugated dienes are usually perceived as most stable; naturally-occurring macrocycles with skipped or non-conjugated dienes are a synthetically challenging class of compounds with biological activity.

In a recent Chemical Communications article, the research groups of Professor Ian Fairlamb and Professor Richard Taylor describe an elegant regio- and stereoselective synthetic approach to an analogue of 19-membered macrocycle phacelocarpus 2-pyrone A. The target compound is distinctly challenging due to its unique, multiple 1,4-pattern of skipped alkene and alkyne functionality.

Several effective synthetic campaigns of 1,4-diene motifs capitalize on alkene/alkyne metathesis or cross-coupling strategies. However, most methods lack stereoselectivity. In contrast, Fairlamb, Taylor and co-workers achieved the construction of the macrocycle in 6.5% yield over 11 steps in the longest linear route.  In doing so, they stereoselectively combined three fragments in the first use of bifunctional (Z)-vinylstannyl-posphonium salt as a nucleophile with stepwise Wittig and Stille reactions. 

The successful Z-stereoselectivity of the Wittig reaction was accompanied by the full retention of the Z-vinyl stannane functionality.  While stereoselectivity in the Stille cross-coupling was anticipated as problematic due to the sensitive nature of the allylic vinyl ether moiety in the substrate, the authors were pleased that the macrocyclization succeeded with an E:Z ratio of 5:1.

To discover all the synthetic details about the chemistry from the Fairlamb and Taylor groups, read the ChemComm article in full – it’s free to access* until 3rd July:
Macrocyclic polyenynes: a stereoselective route to vinyl-ether-containing skipped diene systems
Thomas O. Ronson, Martin H. H. Voelkel, Richard J. K. Taylor and Ian J. S. Fairlamb
Chem. Commun., 2015, 51, 8034-8036
DOI: 10.1039/C5CC02091C

Also of interest may be the recently published Chemical Science Perspective Article “Macrocycles: lessons from the distant past, recent developments, and future directions” by Organic and Biomolecular Chemistry Editorial Board Chair Professor Andrei K. Yudin (Chem. Sci., 2015, 6, 30-49).

*Access is free through a registered RSC account – click here to register


Dr. Tezcan Guney is a web writer for Chemical Society Reviews, Chemical Science and Chemical Communications. Dr. Guney received his Ph.D. from the Department of Chemistry at Iowa State University with Prof. George Kraus, where he focused on the synthesis of biologically active polycyclic natural products and multifunctional imaging probes. Currently, he is a postdoctoral research scholar at the Memorial Sloan-Kettering Cancer Center in New York with Prof. Derek Tan, contributing to the efforts to access biologically active small molecules using the diversity-oriented synthetic approach.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Taking the lead on drug discovery

Researchers from the UK have developed a straightforward strategy for making compounds that have the potential to become clinical drugs. By cleverly combining robust chemistry and simple starting materials, the team accessed numerous small, diverse molecules with properties suitable for drug screening.

Even the most successful drug starts small. Pharmaceutical companies screen vast libraries of small compounds for the next lead – a molecule that interacts with a given target such as a protein or receptor. Through structural optimisation, tweaking and testing, the lead then grows into a full-fledged drug, ready for biological trials.

A minimal toolkit of reactions turns small polyfunctional molecules into diverse scaffolds


Read the full article in Chemistry World»

Read the original journal article in ChemComm – it’s free to access until 1st July:
Synthesis of amphiphilic polysuccinimide star copolymers for responsive delivery in plants
Mingsheng Chen, Shaun P. Jensen, Megan R. Hill, Gloria Moore, Zhenli He and Brent S. Sumerlin 
Chem. Commun., 2015, Advance Article
DOI: 10.1039/C5CC02726H, Communication

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Star creation for plant medication

US scientists have developed a stimuli-responsive, biodegradable star-shaped copolymer for targeted nutrient and pesticide delivery in plants. Controlled release to the phloem at an elevated pH makes these nanocarriers a promising step forward in modern agriculture.

Polymeric nanocarriers have already been studied for site-specific and controlled drug release in medicine, but their agricultural potential remains relatively unexplored. Existing methods of plant nutrient and pesticide delivery offer low efficiency so a site-specific strategy is in demand.


Read the full article in Chemistry World»

Read the original journal article in ChemComm – it’s free to access until 29th June:
Synthesis of amphiphilic polysuccinimide star copolymers for responsive delivery in plants
Mingsheng Chen, Shaun P. Jensen, Megan R. Hill, Gloria Moore, Zhenli He and Brent S. Sumerlin 
Chem. Commun., 2015, Advance Article
DOI: 10.1039/C5CC02726H, Communication

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Terpene analogues bear safer pesticides

Image of ants crawling over a plantTweaking the natural substrates of terpene synthase enzymes could lead to less toxic pesticides and swathes of other important biologically-active compounds, according to UK researchers.

Terpene synthases generate a huge variety of natural compounds with important functions in all forms of life. Many plants emit volatile terpenes to repel predators, including insects, so there is considerable interest in creating new terpene analogues for pesticides. Insects, however, have a very sophisticated ‘nose’ for these compounds and may ignore even closely-related analogues.


Read the full article in Chemistry World»

Read the original journal article ChemComm – it’s free to access until 22nd June:
Novel olfactory ligands via terpene synthases
Sabrina Touchet, Keith Chamberlain, Christine M. Woodcock, David J. Miller, Michael A. Birkett, John A. Pickett and Rudolf K. Allemann 
Chem. Commun., 2015,51, 7550-7553
DOI: 10.1039/C5CC01814E, Communication

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Hierarchical 3D immunoassays – higher loading, lower fouling

If you are producing an immunoassay there are two key parameters you need to understand and optimise: surface structure and surface chemistry. Get these two parameters right and you will optimise the sensitivity of your immunoassay. 

Although there have been a multitude of 3D surface generation routes reported, they are generally complicated and require a lot of additional steps. Although these 3D surfaces lead to high probe loading levels they also often lead to high levels of non-specific protein absorption, undoing any good the surface structure would have led to. 

Jinghua Yin and team from the State Key Laboratory of Polymer Physics and Chemistry at the Changchun Institute of Applied Chemistry have focussed on both properties to generate a much improved immunoassay. 

 Firstly they generated a 3D surface using UV irradiation of polystyrene spheres onto a substrate; they then grafted polymer brushes to the sphere surface. The polymer brushes not only further increased the surface area (more than doubling it from the bare sphere surface) but also acted as an anti-fouling agent, reducing the amount of non-specific binding observed by up to 90%. 

Antibody loading on different surface types showing increasing loading levels

 

The commonality of the functional groups on the polymer brushes mean that any antibody can be attached to the prepared surface. To find out the details of how to make these surfaces and try them out on your own immunoassays, read the paper today!


To read the details, check out the ChemComm article in full:
Facile fabrication of microsphere-polymer brush hierarchically three-dimensional (3D) substrates for immunoassays
Jiao Ma, Shifang Luan, Lingjie Song, Shuaishuai Yuan, Shunjie Yan, Jing Jin and Jinghua Yin
Chem. Commun., 2015, 51, 6749-6752
DOI: 10.1039/C5CC01250C

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Sweating the small stuff – paper-based cystic fibrosis screening

Cystic Fibrosis (CF) is one of the most common inherited diseases, with 1 in 3000 Caucasians a carrier of the single gene mutation. One feature of CF is abnormally elevated sweat anions, and this feature is exploited in the gold standard diagnostic tests.
 
However, gold standard in this case does not stand for inexpensive nor ease of use. This leads to limited availability and the requirement for large volumes of sweat; not the easiest of things to get from newborn babies who need to be screened for CF.
 
In a recent ChemComm article, Xuan Mu, Zhi Zheng and team from the Institute of Basic Medical Sciences at Peking Union Medical College have reported the development of a paper-based analytical device that can detect sweat on the skin using much smaller volumes than current tests.
 
The team use a colorimetric detection approach with stacked functional papers (paper discs produced with a hole punch). The key element is the anion exchange layer which converts sweat anions into hydroxide ions, leading to a local alkalization and subsequent change in the colour of another pH paper layer. 
 

The stacked paper based diagnostic device developed by the authors


The authors have applied their diagnostic device to real patients and can clearly discriminate between CF and non-CF patients with a clinical reference point. With the cost of these tests being less than a dollar and being wearable, the authors have opened up a new opportunity for the screening of CF.
 
To read the details, check out the ChemComm article in full:
 
A paper-based skin patch for the diagnostic screening of cystic fibrosis
Xuan Mu, Xiaolei Xin, Chengyan Fan, Xue Li, Xinlun Tian, Kai-Feng Xu and Zhi Zheng
Chem. Commun., 2015, 51, 6365-6368
DOI: 10.1039/C5CC000717H

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Ionic liquids come up smelling of roses

A new perfume delivery system has been developed by chemists in the UK as a way of keeping sweet smells around for longer. This cleverly designed system tags fragrance alcohols – such as 2-phenylethanol, which has a rose-like scent – onto odourless ionic liquids. In the tagged form, the material has no smell. However, when it comes into contact with water, the link is broken and the fragrance is released – along with its sweet scent.

Fragrance alcohols are typically volatile, so their scent can be lost soon after a perfumed product is applied. A lot of research has been dedicated to finding ways to keep scents around for longer.


Read the full article in Chemistry World»

Read the original journal article in ChemComm:
Pro-fragrant ionic liquids with stable hemiacetal motifs: water-triggered release of fragrances
H. Q. Nimal Gunaratne, Peter Nockemann and Kenneth R. Seddon 
Chem. Commun., 2015,51, 4455-4457
DOI: 10.1039/C5CC00099H, Communication

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Hydrogel with a basic instinct for drug delivery

A self-assembling hydrogel with nanofibres that specifically capture and release anti-inflammatory compounds has been created for applications in targeted drug delivery. The drug naproxen is only unleashed from the gel in basic solvents, a trait that could be exploited to avoid naproxen’s undesirable side effects.

Painkillers and anti-inflammatory drugs, such as naproxen and ibuprofen, are ubiquitous in the management of many diseases and injuries. However, even these well-established medications can cause stomach ulcers and other gastrointestinal disorders. Side effects most commonly arise when the drugs are taken for an extended period of time, as in the long-term treatment of arthritis with naproxen. One way of preventing these painful consequences is to encapsulate drugs to restrict their availability in certain parts of the body and target their release to others.


Read the full article in Chemistry World»

Read the original journal article in ChemComm – it’s free to access until 27th May:
Self-assembled sorbitol-derived supramolecular hydrogels for the controlled encapsulation and release of active pharmaceutical ingredients
Edward J. Howe, Babatunde O. Okesola and David K. Smith 
Chem. Commun., 2015,51, 7451-7454
DOI: 10.1039/C5CC01868D, Communication

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Hot ChemComm articles for April

Here are some of the latest referee-recommended articles published in ChemComm – all free to access until 15th May!

Lewis acid-assisted detection of nerve agents in water
Rahul R. Butala, William R. Creasy, Roderick A. Fry, Michael L. McKee and David A. Atwood 
Chem. Commun., 2015, Advance Article
DOI: 10.1039/C5CC00466G, Communication

C5CC00466G GA


From slow to fast – the user controls the rate of the release of molecules from masked forms using a photoswitch and different types of light
C. Chad Warford, Carl-Johan Carling and Neil R. Branda   
Chem. Commun., 2015,51, 7039-7042
DOI: 10.1039/C5CC00218D, Communication

C5CC00218D GA


The long-sought seventeen-electron radical [(C6Me6)Cr(CO)3]+: isolation, crystal structure and substitution reaction
Wenqing Wang, Xingyong Wang, Zaichao Zhang, Ningning Yuan and Xinping Wang 
Chem. Commun., 2015, Advance Article
DOI: 10.1039/C5CC01941A, Communication

 C5CC01941A GA


A bioelectronic system for insulin release triggered by ketone body mimicking diabetic ketoacidosis in vitro
Maria Gamella, Nataliia Guz, José M. Pingarrón, Roshanak Aslebagh, Costel C. Darie and Evgeny Katz 
Chem. Commun., 2015, Advance Article
DOI: 10.1039/C5CC01498K, Communication

 C5CC01498K GA


A membraneless air-breathing hydrogen biofuel cell based on direct wiring of thermostable enzymes on carbon nanotube electrodes
Noémie Lalaoui, Anne de Poulpiquet, Raoudha Haddad, Alan Le Goff, Michael Holzinger, Sébastien Gounel, Michel Mermoux, Pascale Infossi, Nicolas Mano, Elisabeth Lojou and Serge Cosnier 
Chem. Commun., 2015,51, 7447-7450
DOI: 10.1039/C5CC02166A, Communication

 C5CC02166A GA


Body temperature sensitive micelles for MRI enhancement
Xiaolei Zhu, Shizhen Chen, Qing Luo, Chaohui Ye, Maili Liu and Xin Zhou 
Chem. Commun., 2015, Advance Article
DOI: 10.1039/C5CC02587G, Communication

C5CC02587G GA

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

The Goldilocks of heterogeneous catalysis

An international team of scientists has tethered palladium to a metal–organic framework (MOF) support using thiol groups normally associated with catalyst poisoning. In doing so, the metal centre becomes neither too soluble nor too crowded, but is instead just right for lossless catalysis.

The modified MOF catalyses a coupling reaction between a boronic acid and 4-bromo-2-fluorobenzonitrile

Heterogeneous catalysts, where metal catalysts are supported on an insoluble structure, are easier to recover than soluble homogeneous catalysts. Leaching of the metal catalyst from a support into solution is however a central problem in heterogeneous catalysis. Metals lost to the supernatant can be costly, either in catalyst replacement or additional purification and recovery processes. In drug synthesis there are strict limits on residual metals in active pharmaceutical ingredients. Palladium levels must, for example, be less than 10 ppm for oral intake, and an order of magnitude lower for parenteral exposure.


Read the full article in Chemistry World»

Read the original journal article in ChemComm – it’s free to access until 13th May 2015:
Tackling poison and leach: catalysis by dangling thiol–palladium functions within a porous metal–organic solid
Bo Gui, Ka-Kit Yee, Yan-Lung Wong, Shek-Man Yiu, Matthias Zeller, Cheng Wang and Zhengta Xu 
Chem. Commun., 2015,51, 6917-6920
DOI: 10.1039/C5CC00140D, Communication

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)