Materials Advances – Page 2 – Journal of Materials Chemistry Blog

Archive for the ‘Materials Advances’ Category

Repair and re-use of the outer casing for a Lithium-ion battery cell

19 Aug 2022

An infographic describing a new method to repair and recycle a Li-ion battery pouch

Benign solvents for recycling and re-use of a multi-layer battery pouch
Jean E. Marshall, Bethany Middleton, Dominika Gastol, Roberto Sommerville, Con R. McElroy, Emma Kendrick and Vannessa Goodship
Mater. Adv., 2022, 3, 4973-4981, DOI: 10.1039/D2MA00239F

Meet the authors

	Dr. Jean Marshall gained her Ph.D. from the University of Cambridge in 2008, for investigating surface-initiated polymer chemistry. Her subsequent research work includes postdoctoral work on stimulus-responsive polymeric materials, as well as industrial experience in novel polymers for ink formulations. Since joining the Warwick Manufacturing Group (University of Warwick) in 2019, she has worked on several projects, covering diverse areas including tailored polymers for use in Lithium-ion batteries, polymeric materials as part of a circular economy, and recycling of battery components.
	Dominika Gastol joined University of Birmingham in 2019 and has been involved in recycling of Li-ion batteries from EV since then. Her research activities cover development of material recycling streams combined with remanufacturing, automated methods of electrode deposition and advanced microscopic characterisation.
	Rob gained a Ph.D. in Chemical Engineering from the university of Birmingham in 2017, where he worked on producing synthetic zeolites from fly ash. Rob worked at the University of Warwick for a year on Lithium-ion battery recycling under Professor Emma Kendrick, before returning to Birmingham to join the ReLiB project in 2018. Rob Sommerville is a Postdoctoral Research Fellow with a focus on reutilisation of waste and the circular economy of Lithium Ion Batteries. He is currently a Faraday Institution Research Fellow working on the ReLiB (Recycling and Reuse of Lithium Ion Batteries) project funded by the Faraday Institution, looking at physical separation techniques in the recycling of lithium-ion batteries.
	Dr Rob McElroy gained his Ph.D in 2007 at Keele University working on the production of composite materials from copolymers incorporating renewable resources. In 2009 he joined Prof. Pietro Tundo’s Carbonate Chemistry Group at Ca Foscari University of Venice looking into applications of dialkyl carbonates. He joined the Green Chemistry Centre of Excellence, University of York as a PDRA in 2011 and has worked on a variety of projects including extraction and separation in supercritical CO2, greening of pharmaceutical chemistry, production of bio-derived polymers, production of bio-derived surfactants, running an industry facing club focusing on circular economy related research called RenewChem, development of new green solvents and solvent applications. His current role is looking at green solvents in electrode formulation and as deputy director of the Circa Renewable Chemistry Institute.
	Following 14 years working in industry as a plastic engineer, Dr. Vannessa Goodship joined WMG, University of Warwick in 1997. She gained a PhD in 2002 on multi-material injection moulding and has continued working across multiple sectors on polymer related topics at the academic and industry interface.
	Prof Emma Kendrick is Professor of Energy Materials, lead of the Energy Materials Group (EMG) in the School of Metallurgy and Materials and co-director of the Centre for Energy Storage (BCES) at the University of Birmingham (UoB). Her research focus is upon sustainable energy storage technologies, the objective to understand the science and engineering principles which underpin manufacturing and lifetime. Before UoB, she spent two years as Reader in WMG, University of Warwick, and before academia, she led innovations in the battery industry. Latterly as Chief Technologist in Energy Storage at SHARP Laboratories of Europe Ltd (SLE) and prior to that for two highly innovative lithium-ion battery SMEs, Fife Batteries Ltd and Surion Energy Ltd. She completed her PhD in Ceramics at Ceram Research and Keele University, MSc in New Materials at University of Aberdeen, and BSC in chemistry from the University of Manchester.

An interview with Dr. Jean Marshall:

a) What aspect of your work are you most excited about at the moment and what do you find most challenging about your research?

I am currently gaining a lot of new knowledge about how lithium-ion batteries work and how complex they are as chemical systems. The electrochemistry of batteries is not necessarily an obvious area for a polymer chemist, but batteries are enormously complicated and there is a lot of scope for experimenting with novel materials in this area. The most difficult challenge here is deciding which research question to tackle first!

b) How do you feel about Materials Advances as a place to publish research on this topic?

Materials Advances is an excellent ‘home’ for our work. Open access publishing is great for us as academics and publishing with an RSC journal lends articles good credibility.

c) Can you share one piece of career-related advice or wisdom with other early career scientists?

Some researchers prefer to have laser-focus on one niche subject, and that’s definitely the approach that’s encouraged for gaining a PhD. However, in my ‘postdoctoral life’ I’ve definitely found that the most productive projects are really collaborative. So, my advice is to collaborate with as many people as possible, and make sure that they aren’t all in your direct field of research. The more people you talk to, the more you can bounce ideas around, and you’ll find yourself with far more new avenues to explore.

Comments Off on Repair and re-use of the outer casing for a Lithium-ion battery cell

Call for Papers: Advanced Functional Materials and Manufacturing Processes

07 Jul 2022

Guest Editors: Jessica O. Winter (The Ohio State University), Jawwad Darr (University College London), John Wang (National University Singapore)

Advanced Functional Materials (AFMs): especially nanomaterials, play an important role in catalysis, optoelectronic and quantum materials, biomaterials, and energy harvesting, storage, and conversion materials. AFMs can be designed, synthesized, (or modelled) to possess different (nano)particle/cluster attributes, such as bulk and/or defect structures and surface properties. AFMs can be further consolidated into larger hierarchical arrangements, using additive manufacturing or electrospinning for example, with nano-/micro-structure or surface characteristics that impart new functionality.

Materials Processes: Research involving discovering and translating AFMs from the bench to commercial products can be challenging. Discovery synthesis approaches for new AFMs require materials to be made faster and consistently, so that properties can be compared within compositional space. Thereafter, during scale up, replicating properties can pose a number of challenges. Scale-up can result in inhomogeneous mixing and uneven mass and heat gradients that influence material function. Structure-property relationships can strongly depend on manufacturing method (e.g., thermodynamic vs. kinetic limitations). Consequently, there is a need to better understand the relationship between materials synthesis and consolidation parameters at different scales in order to maintain desired functional properties.

This themed issue aims to explore the latest developments in advanced inorganic functional materials (synthesis, modelling and simulation), novel manufacturing processes including scale up approaches, and property evaluation and optimization. Suggested contributions that address, but are not restricted to, the following topics are welcome:

Advanced Materials

Ceramics, metal oxides, nanoparticles, metal organic frameworks, zeolites
Combinatorial, structure-property relationships, theory and simulation
Catalysts, quantum materials, biomaterials, and energy materials

Materials Processes

Batch vs. flow, green synthesis/manufacturing, process control and optimization
Hydrothermal/solvothermal, flame, plasma, electrospinning, precipitation methods, etc.
Process intensification / scale up
Controlled heat treatments/sintering
Additive manufacturing/3D printing

If you are interested in contributing to this collection please get in touch with the Editorial Office by email.

Please add a “note to the editor” in the submission form when you submit your manuscript to say that this is a submission for the themed collection. The Editorial Office and Guest Editors reserve the right to check suitability of submissions in relation to the scope of the collection and inclusion of accepted articles in the collection is not guaranteed. All manuscripts will be subject to the journal’s usual peer review process. Accepted manuscripts will be added to the collection as soon as they are online, and they will be published in a regular issue of Materials Advances.

Comments Off on Call for Papers: Advanced Functional Materials and Manufacturing Processes

Editor’s choice web collection: luminescent metal halides, selected by Associate Editor Zhiguo Xia

01 Jul 2022

We are delighted to announce a new Editor’s choice web collection on luminescent metal halides, selected by Journal of Materials Chemistry C and Materials Advances Associate Editor Zhiguo Xia.

Read the collection

“By carefully selecting the published articles from Journal of Materials Chemistry C and Materials Advances into a themed collection, I hope that the charming and the rich performances of luminescent metal halides can be witnessed by chemists, physicists, and material scientists.” Associate Editor Zhiguo Xia (South China University of Technology, China)

A few examples of the articles in this collection are shown below. You can read the full collection online. All articles in the collection are free to access until the 22^nd July 2022.

Editorial

Editor’s choice collection on luminescent metal halides: here come halide perovskites and their derivatives

Zhiguo Xia

J. Mater. Chem. C, 2022, Advance Article DOI: 10.1039/D2TC90122F

A selection of articles in Journal of Materials Chemistry C

2D layered metal-halide perovskite/oxide semiconductor-based broadband optoelectronic synaptic transistors with long-term visual memory

Youngjun Park, Min-Kyu Kim and Jang-Sik Lee

J. Mater. Chem. C, 2021, 9, 1429-1436 (DOI: 10.1039/D0TC04250A)

Molecularly imprinted nanocomposites of CsPbBr₃ nanocrystals: an approach towards fast and selective gas sensing of explosive taggants

Eduardo Aznar-Gadea, Ivan Sanchez-Alarcon, Ananthakumar Soosaimanickam, Pedro J. Rodriguez-Canto, F. Perez-Pla, Juan P. Martínez-Pastor and Rafael Abargues

J. Mater. Chem. C, 2022, 10, 1754-1766 (DOI: 10.1039/D1TC05169E)

Stable down-conversion white light-emitting devices based on highly luminescent copper halides synthesized at room temperature

Lin-Tao Wang, Zhuang-Zhuang Ma, Fei Zhang, Meng Wang, Xu Chen, Di Wu, Yong-Tao Tian, Xin-Jian Li and Zhi-Feng Shi

J. Mater. Chem. C, 2021, 9, 6151-6159 (DOI: 10.1039/D1TC01037A)

Lanthanide-doped inorganic halide perovskites (CsPbX₃): novel properties and emerging applications

Santosh Kachhap, Sachin Singh, Akhilesh Kumar Singh and Sunil Kumar Singh

J. Mater. Chem. C, 2022, 10, 3647-3676 (DOI: 10.1039/D1TC05506B)

A selection of articles in Materials Advances

Inkjet printed mesoscopic perovskite solar cells with custom design capability

Anand Verma, David Martineau, Sina Abdolhosseinzadeh, Jakob Heier and Frank Nüesch

Mater. Adv., 2020, 1, 153-160 (DOI: 10.1039/D0MA00077A)

Ruddlesden Popper 2D perovskites as Li-ion battery electrodes

Angus Mathieson, Mohammad Rahil, Youcheng Zhang, Wesley M. Dose, Jung Tae Lee, Felix Deschler, Shahab Ahmad and Michael De Volder

Mater. Adv., 2021,2, 3370-3377 (DOI: 10.1039/D1MA00020A)

The properties, photovoltaic performance and stability of visible to near-IR all inorganic perovskites

Adva Shpatz Dayan, Xinjue Zhong, Małgorzata Wierzbowska, C. E. M. de Oliveira, Antoine Kahn and Lioz Etgar

Mater. Adv., 2020,1, 1920-1929 (DOI: 10.1039/D0MA00452A)

Photocatalytic reduction of CO₂ by halide perovskites: recent advances and future perspectives

Muhammad Ali Raza, Feng Li, Meidan Que, Liangliang Zhu and Xi Chen

Mater. Adv., 2021,2, 7187-7209 (DOI: 10.1039/D1MA00703C)

Comments Off on Editor’s choice web collection: luminescent metal halides, selected by Associate Editor Zhiguo Xia

2D C2h group III monochalcogenides with direct bandgaps and highly anisotropic carrier mobilities

17 May 2022

An infographic highlighting the prediction of 2D group III monochalcogenides for future high efficiency solar cells and optoelectronics

Prediction of new phase 2D C2h group III monochalcogenides with direct bandgaps and highly anisotropic carrier mobilities
Tuo Hu, Congsheng Xu, Ao Zhang and Peiyuan Yu
Mater. Adv., 2022, 3, 2213-2221, DOI: 10.1039/D1MA01068A

Meet the authors

	Tuo Hu was a visiting student in Prof. Peiyuan Yu’s group at the Department of Chemistry at Southern University of Science and Technology from 2020 to 2021 where he worked on polymorphism of 2D semiconductors via DFT computation. He is currently a fourth-year undergraduate at University of California, Los Angeles majoring in Chemistry and Materials Science.
	Congsheng Xu received his master’s degree from Xiangtan University where his research focused on electronic properties of multilayer GeSe and its heterojunctions. Currently, he is a doctoral student in Prof. Peiyuan Yu’s research group at Southern University of Science and Technology. His main research direction is prediction of molecular structures and calculation of electronic properties of two-dimensional materials by machine learning.
	Ao Zhang received his Ph.D. in physics from Hunan Normal University in 2021. He is currently a postdoctoral at the Department of Physics in Southern University of Science and Technology. His research interests are on novel physical properties induced by spin-orbit coupling, topological semimetals, and multiferroic materials.
	Peiyuan Yu obtained his Ph.D. in chemistry from University of California, Los Angeles in 2017 and was a postdoctoral fellow at Lawrence Berkeley National Laboratory from 2017 to 2019. He began his independent career as an Assistant Professor in the Department of Chemistry at Southern University of Science and Technology (SUSTech) in 2019. Peiyuan’s research program uses computational chemistry to study a wide range of phenomena in chemistry and materials science, with a focus in understanding the reaction mechanisms and origins of selectivity of organic reactions.

(a) What aspect of your work are you most excited about at the moment and what do you find most challenging about your research?

In this work, we are most excited to discover that some novel polymorphs of two-dimensional materials give rise to very interesting and exotic electronic properties. For example, the new C_2h polymorph of 2D group III monochalcogenides features a direct bandgap which has not been found in other known single-layer phases. However, conventional computational methods to predict or design novel polymorphs are often limited by large computational costs. Therefore, we investigated the use of deep learning methods based on generative adversarial neural networks to quickly and comprehensively discover different phases of two-dimensional materials. This project requires knowledge and specialties from diverse disciplines such as computational chemistry, materials science, and physics. Besides, the rapid development of new computational techniques constantly motivates us to try to apply new technologies, which is quite challenging and intriguing.

(b) How do you feel about Materials Advances as a place to publish research on this topic?

Materials Advances is designated for interdisciplinary research and insights in the field of materials research, and our work is a combination of computer science and materials science, so I think it is a perfect match for this work to be published on Materials Advances. The professional editorial team and expert reviewers made the publishing process highly efficient.

For undergraduate students who are interested in scientific research, I would like to encourage them to actively participate and collaborate with graduate students and postdocs in research projects as early as possible and don’t be shy to share their hypotheses or insights.

Comments Off on 2D C2h group III monochalcogenides with direct bandgaps and highly anisotropic carrier mobilities

Journal of Materials Chemistry C and Materials Advances welcome Professor Ana Flavia Nogueira and Professor Zhiguo Xia to our Editorial Boards

04 Mar 2022

Professor Ana Flavia Nogueira, Associate Editor, University of Campinas, Brazil

Professor Ana Flavia Nogueira obtained her bachelor’s degree in Chemistry from the University of São Paulo (1996) and Master (1998) and PhD degrees in Chemistry from the University of Campinas (2001). She worked as a post-doctorate fellow at the Imperial College, UK, in 2001-2002 and as visiting researcher at Stanford University in 2017-2018. At the moment, she is Full Professor in the Chemistry Institute at UNICAMP and Director of the Center for Innovation on New Energies (CINE, www.cine.org.br). Professor Nogueira’s research focuses on the development of functional (nano)materials and their application in solar energy conversion. She has experience in the field of perovskite solar cells, perovskite quantum materials and dense energy carriers (generation of solar fuels through photoelectrocatalytic systems using water, CO₂ and other low-added values substrates).

Read these publications by Professor Ana Flavia Nogueira in Royal Society of Chemistry journals:

Effect of the incorporation of poly(ethylene oxide) copolymer on the stability of perovskite solar cells

Jeann Carlos da Silva, Francineide Lopes de Araújo, Rodrigo Szostak, Paulo Ernesto Marchezi, Raphael Fernando Moral, Jilian Nei de Freitas and Ana Flávia Nogueira
J. Mater. Chem. C, 2020, 8, 9697-9706, DOI: 10.1039/D0TC02078H

Reduced graphene oxide in perovskite solar cells: the influence on film formation, photophysics, performance, and stability
Paulo Ernesto Marchezi, Francineide Lopes de Araújo, Rodrigo Szostack, José Carlos Germino, Eralci M. Therézio, Alexandre Marletta and Ana Flavia Nogueira
J. Mater. Chem. C, 2021, 9, 14648-14658, DOI: 10.1039/D1TC01360B

Professor Zhiguo Xia, Associate Editor, South China University of Technology, China

Professor Zhiguo Xia obtained his bachelor degree in 2002 and master degree in 2005 from Beijing Technology and Business University, and he received his PhD degree in chemistry from Tsinghua University in 2008. He worked at the China University of Geosciences, Beijing from 2008 to 2014 as an Assistant Professor and Associate Professor. He has been a full Professor at the University of Science and Technology Beijing since 2014. In 2018, he moved to South China University of Technology and worked as a full professor at The State Key Laboratory of Luminescent Materials and Devices. His research interest focuses on the structural design of inorganic luminescence materials including the rare earth phosphors and luminescent metal halides for emerging photonics applications, such as light-emitting diodes, scintillators and sensors.

Read these publications by Professor Zhiguo Xia in Royal Society of Chemistry journals:

Design optimization of CsPbBr₃ nanocrystals into zeolite Beta composites as ultra-stable green emitters for backlight display applications
Bohan Li, Yuchi Zhang, Yan Xu and Zhiguo Xia
J. Mater. Chem. C, 2021, 9, 12118-12123, DOI: 10.1039/D1TC02757C

Recent progress of zero-dimensional luminescent metal halides
Mingze Li and Zhiguo Xia
Chem. Soc. Rev., 2021, 50, 2626-2662, DOI: 10.1039/D0CS00779J

We encourage you to submit your best work to Ana, Zhiguo and our team of Associate Editors now! Check out the Journal of Materials Chemistry C and Materials Advances author guidelines for more information on our article types.

Please join us in welcoming Professors Ana Flavia Nogueira and Zhiguo Xia to the Journal of Materials Chemistry C and Materials Advances Editorial Boards.

Comments Off on Journal of Materials Chemistry C and Materials Advances welcome Professor Ana Flavia Nogueira and Professor Zhiguo Xia to our Editorial Boards

Introducing the new Materials Advances “Fluorescent and Luminescent Materials” article collection

29 Jun 2021

We are delighted to share with you a new collection of articles highlighting some of the most recent articles in Materials Advances on ‘Fluorescent and Luminescent Materials’. Containing both reviews and original research, the collection covers the synthesis and characterisation of these materials, along with exploring multiple applications including sensing, imaging and lighting.

See the collection and read the articles. Below is a snapshot of some of the articles included.

Review

Solid-state fluorescent carbon dots: quenching resistance strategies, high quantum efficiency control, multicolor tuning, and applications
Junli Wang, Yongzhen Yang and Xuguang Liu
Mater. Adv., 2020, 1, 3122-3142
DOI: 10.1039/D0MA00632G

Communication

L-Tyrosine derived fluorescent molecular probes as solvent mediated flip-flop halide (iodide/fluoride) sensors and reversible chromogenic pH indicators
Navnita Kumar and Sanjay K. Mandal
Mater. Adv., 2021, 2, 942-947
DOI: 10.1039/D0MA00589D

Paper

Mn2+ activated Ca-α-SiAlON – broadband deep-red luminescence and sensitization by Eu2+, Yb2+ and Ce3+
Atul D. Sontakke, Arnoldus J. van Bunningen, Sadakazu Wakui and Andries Meijerink
Mater. Adv., 2021, 2, 2075-2084
DOI: 10.1039/D1MA00036E

We hope you enjoy reading these articles!

materialsadvances-rsc@rsc.org

Visit our website – rsc.li/materials-advances

Materials Advances is an international, gold open access journal, publishing good quality research across the breadth of materials science.

Free to read, and free to publish in, the journal builds on and complements the materials research published in the Royal Society of Chemistry journal portfolio.

Comments Off on Introducing the new Materials Advances “Fluorescent and Luminescent Materials” article collection

The Materials Advances “Popular Advances” article collection

02 Jun 2021

The Materials Advances “Popular Advances” article collection

The “Popular Advances” collection for Materials Advances recognizes the most well received papers published in the journal so far. New papers will be added monthly, so be sure to keep up to date with the collection.

See the collection and read the articles

June highlights

May highlights

Review
	Direct ink writing of energy materials S. Tagliaferri, A. Panagiotopoulos and C. Mattevi *Mater. Adv.*, 2021,2, 540-563 DOI: 10.1039/D0MA00753F
Paper
	Distinct twist-bend nematic phase behaviors associated with the ester-linkage direction of thioether-linked liquid crystal dimers Yuki Arakawa, Kenta Komatsu, Jun Feng, Chenhui Zhu and Hideto Tsuji *Mater. Adv.*, 2021,2, 261-272 DOI: 10.1039/D0MA00746C

April highlights

Review
	Recent advances, design guidelines, and prospects of flexible organic/inorganic thermoelectric composites Qinghui Jiang, Junyou Yang, Peter Hing and Haitao Ye *Mater. Adv*., 2020, 1, 1038-1054 DOI: 10.1039/D0MA00278J
Communication
	The surface-enhanced resonance Raman scattering of dye molecules adsorbed on two-dimensional titanium carbide Ti3C2Tx (MXene) film Satheeshkumar Elumalai, John R. Lombardi and Masahiro Yoshimura *Mater. Adv*., 2020, 1, 146-152 DOI: 10.1039/D0MA00091D
Paper
	Tuning the porosity of biofabricated chitosan membranes in microfluidics with co-assembled nanoparticles as templates Khanh L. Ly, Christopher B. Raub and Xiaolong Luo *Mater. Adv*., 2020, 1, 34-44 DOI: 10.1039/D0MA00073F

We hope you enjoy reading these articles!

materialsadvances-rsc@rsc.org

Visit our website – rsc.li/materials-advances

Materials Advances is an international, gold open access journal, publishing good quality research across the breadth of materials science.

Free to read, and free to publish in, the journal builds on and complements the materials research published in the Royal Society of Chemistry journal portfolio.

Comments Off on The Materials Advances “Popular Advances” article collection

Remembering Susan Odom, Materials Advances Advisory Board Member

28 Apr 2021

Dr Susan Odom, member of the Materials Advances Advisory Board, has sadly passed away

It is with great sadness that we have learnt that Dr Susan Odom, University of Kentucky, has passed away suddenly at her home.

Susan Odom received her B.S. in Chemistry from the University of Kentucky in 2003, followed by her PhD from Georgia Tech in 2008, with a stint as a visiting graduate scholar at Oxford University. After a 3 year post-doctorate position at the University of Illinois, Susan joined the faculty at her alma mater, the University of Kentucky in 2011, later becoming an Assistant Professor in 2017. In 2018, Susan was part of the University of Kentucky faculty group teaching at Jilin University in China.

During her time as faculty at Kentucky, Susan won the “Teacher who made a difference” award in 2012, 2013, 2016 and 2017. More recently, last year, Susan was awarded the American Chemical Society Women in Chemistry Rising Star Award. She was also committed to mentoring and supporting women in STEM fields, co-founding a group to encourage girls to pursue their academic goals, and serving on the Kentucky ACE Women’s Network.

Susan’s research focused on the design, synthesis, and characterization of conjugated organic materials for applications that access multiple states of oxidation. She was particularly interested in structure/property relationships of redox-active molecules for energy storage applications, such as lithium-ion batteries and redox-flow batteries. Susan’s group was also making strides in the development of materials for the positive and negative sides of flow cell batteries.

Susan published over three dozen articles on her research, and held five awarded patents and 11 patent applications.

Dr Odom will be missed by the Journal of Materials Chemistry family and the global materials community, but in particular by her friends, colleagues and students at the University of Kentucky.

Interim Dean of the College of Arts and Sciences at UK, Christian Brady, has written a memorial for Susan

A message board has also been set up for people to share memories of Susan for the University of Kentucky and wider community

Comments Off on Remembering Susan Odom, Materials Advances Advisory Board Member

1 year of Materials Advances – the covers

12 Apr 2021

This month we are celebrating our fantastic first year of Materials Advances! We have seen 15 issues, containing over 400 high quality articles.

We have chosen some of our favourite covers from all the wonderful artwork that has featured on the journal so far. Thank you to all the authors who have provided these amazing artworks!

We invite you to join us on Twitter to vote for your favourite cover from the shortlisted covers below.

Join us on Twitter to vote for your favourite

Click on each of the images for a close-up look of each shortlisted cover.

	A Cold atmospheric plasma cancer treatment, direct versus indirect approaches Alisa Malyavko, Dayun Yan, Qihui Wang, Andrea L. Klein, Khyati C. Patel, Jonathan H. Sherman and Michael Keidar *Mater. Adv.*, 2020,1, 1494-1505 DOI: 10.1039/D0MA00329H
	B Aspect ratio controlled synthesis of tellurium nanowires for photovoltaic applications Dipendra Pokhrel, Ebin Bastola, Adam B. Phillips, Michael J. Heben and Randy J. Ellingson *Mater. Adv.*, 2020,1, 2721-2728 DOI: 10.1039/D0MA00394H
	C Plasmonic triangular nanoprism sensors Joe Otsuki, Kosuke Sugawa and Shota Jin *Mater. Adv.*, 2021,2, 32-46 DOI: 10.1039/D0MA00644K
	D Trends in additively manufactured microfluidics, microreactors and catalytic materials Andrea Rogolino and Gianpaolo Savio *Mater. Adv.*, 2021,2, 845-855 DOI: 10.1039/D0MA00704H

Comments Off on 1 year of Materials Advances – the covers

Introducing the new Materials Advances “Perovskites” article collection

25 Mar 2021

We are delighted to share with you a new collection of articles highlighting some of the most recent articles in Materials Advances on ‘Perovskites’. With a wide range of applications, perovskites are any materials with a similar crystal structure to a perovskite mineral, which is usually lead or tin halide-based. Containing both reviews and original research, the collection includes work on synthesis, properties, structural considerations, and covers applications in solar cells, optics and lighting.

See the collection and read the articles. Below is a snapshot of some of the articles included.

Review

Polymorphism in metal halide perovskites
Aida Alaei, Abigail Circelli, Yihang Yuan, Yi Yang and Stephanie S. Lee
Mater. Adv., 2021, 2, 47-63
DOI: 10.1039/D0MA00643B

Communication

Novel scalable aerosol-assisted CVD route for perovskite solar cells
R. Ratnasingham, L. Mohan, M. Daboczi, T. Degousée, R. Binions, O. Fenwick, J.-S. Kim, M. A. McLachlan and J. Briscoe
Mater. Adv., 2021, Advance Article
DOI: 10.1039/D0MA00906G

Paper

A reversible and fast-responsive humidity sensor based on a lead-free Cs2TeCl6 double perovskite
Chaojie Pi, Xue Yu, Weiqing Chen, Liuli Yang, Chao Wang, Zhichao Liu, Yiya Wang, Jianbei Qiu, Bitao Liu and Xuhui Xu
Mater. Adv., 2021, 2, 1043-1049
DOI: 10.1039/D0MA00835D

We hope you enjoy reading these articles!

materialsadvances-rsc@rsc.org

Visit our website – rsc.li/materials-advances

Materials Advances is an international, gold open access journal, publishing good quality research across the breadth of materials science.

Free to read, and free to publish in, the journal builds on and complements the materials research published in the Royal Society of Chemistry journal portfolio.

Comments Off on Introducing the new Materials Advances “Perovskites” article collection

Journal of Materials Chemistry Blog

Archive for the ‘Materials Advances’ Category

Repair and re-use of the outer casing for a Lithium-ion battery cell

An infographic describing a new method to repair and recycle a Li-ion battery pouch

Meet the authors

Call for Papers: Advanced Functional Materials and Manufacturing Processes

Guest Editors: Jessica O. Winter (The Ohio State University), Jawwad Darr (University College London), John Wang (National University Singapore)

Advanced Materials

Materials Processes

If you are interested in contributing to this collection please get in touch with the Editorial Office by email.

Editor’s choice web collection: luminescent metal halides, selected by Associate Editor Zhiguo Xia

2D C2h group III monochalcogenides with direct bandgaps and highly anisotropic carrier mobilities

An infographic highlighting the prediction of 2D group III monochalcogenides for future high efficiency solar cells and optoelectronics

Meet the authors

Journal of Materials Chemistry C and Materials Advances welcome Professor Ana Flavia Nogueira and Professor Zhiguo Xia to our Editorial Boards

Introducing the new Materials Advances “Fluorescent and Luminescent Materials” article collection

The Materials Advances “Popular Advances” article collection

The Materials Advances “Popular Advances” article collection

See the collection and read the articles

June highlights

May highlights

April highlights

Remembering Susan Odom, Materials Advances Advisory Board Member

Dr Susan Odom, member of the Materials Advances Advisory Board, has sadly passed away

1 year of Materials Advances – the covers

Join us on Twitter to vote for your favourite

Click on each of the images for a close-up look of each shortlisted cover.

Introducing the new Materials Advances “Perovskites” article collection

Links

Categories

Archives

Meta