Using eggshells to remove toxic water pollutants

Scientists in China have developed an absorbent material made from waste eggshell membrane that can remove Cr(VI) from contaminated water.

Chromium is usually found in water systems in two main states: Cr(III) and Cr(VI). But, while Cr(III) is needed for metabolism, Cr(VI) is highly toxic and carcinogenic to living organisms, and unfortunately, this form is highly mobile.

This ability to move quickly in a system means that developing an efficient and cost effective method to remove Cr(VI) from contaminated water is important. Current methods for removal include reduction, ion exchange and absorption. Of these, absorption is popular because it is simple and effective.

Eggshells

Not only did the eggshell membrane remove Cr(VI) from contaminated water, it also reduced some of it to the less toxic Cr(III)

Biosorption is a type of absorption that uses a material that is not man-made, usually some kind of waste material. Yuming Huang and Bin Liu from Southwest University, Chongqing, have designed a new biosorbent using eggshells. ‘As the by-product of food processing and manufacturing plants, eggshells represent a significant waste because they are traditionally useless after the production of eggs and egg derivatives,’ says Huang. ‘Using this waste to produce useful biomaterial for removal of Cr(VI) from water may be a good choice and opens up a pathway to using biowaste to treat toxic metals from water.’ Interested to know more? Read the full article in Chemistry World here…

Polyethyleneimine modified eggshell membrane as a novel biosorbent for adsorption and detoxification of Cr(VI) from water
Bin Liu and Yuming Huang
J. Mater. Chem., 2011
DOI: 10.1039/c1jm12329g

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Instant Health Checks for Buildings and Bridges: J. Mater. Chem. article featured in Scientific American

A Journal of Materials Chemistry communication by Simon Laflamme, Guggi Kofod and co-workers has been featured in Scientific American (Instant Health Checks for Buildings and Bridges).

In their paper (Strongly enhanced sensitivity in elastic capacitive strain sensors) the team demonstrate the capacitance response of capacitive elastic strain sensors can be enhanced more than 50 times by grafting of conducting polymer to the elastomer backbone. These sensors could be used to detect strain and structural fatigue in buildings, bridges and other large structures.

Graphical abstract: Strongly enhanced sensitivity in elastic capacitive strain sensors

Interested to know more about mechanoresponsive materials? Why not read June’s themed issue.

To keep up-to-date with all the latest research, sign up for the journal’s e-alerts or RSS feeds or follow Journal of Materials Chemistry on Twitter.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Top Ten most-read Journal of Materials Chemistry articles in August

This month sees the following articles in that are in the top ten most accessed in August:

Highly efficient red electrophosphorescent device incorporating a bipolar triphenylamine/bisphenylsulfonyl-substituted fluorene hybrid as the host 
Fang-Ming Hsu, Chen-Han Chien, Ya-Jou Hsieh, Chen-Hao Wu, Ching-Fong Shu, Shun-Wei Liu and Chin-Ti Chen 
J. Mater. Chem., 2009, 19, 8002-8008 
DOI: 10.1039/b910292b 

Mesoporous titania photocatalysts: preparation, characterization and reaction mechanisms 
Adel A. Ismail and Detlef W. Bahnemann 
J. Mater. Chem., 2011, 21, 11686-11707
DOI: 10.1039/c1jm10407a 

A review of advanced and practical lithium battery materials 
Rotem Marom, S. Francis Amalraj, Nicole Leifer, David Jacob and Doron Aurbach 
J. Mater. Chem., 2011, 21, 9938-9954 
DOI: 10.1039/c0jm04225k 

Carbazole and thienyl benzo[1,2,5]thiadiazole based polymers with improved open circuit voltages and processability for application in solar cells 
Hunan Yi, Solyman Al-Faifi, Ahmed Iraqi, Darren C. Watters, James Kingsley and David G. Lidzey 
J. Mater. Chem., 2011, 21, 13649-13656 
DOI:10.1039/c1jm12089a 

Light-trapping nano-structures in organic photovoltaic cells 
Doo-Hyun Ko, John R. Tumbleston, Abay Gadisa, Mukti Aryal, Yingchi Liu, Rene Lopez and Edward T. Samulski 
J. Mater. Chem., 2011, Advance Article
DOI:10.1039/c1jm12300a 

Recent progress of high performance organic thin film field-effect transistors 
Qing Meng, Huanli Dong, Wenping Hu and Daoben Zhu 
J. Mater. Chem., 2011, 21, 11708-11721 
DOI: 10.1039/c1jm10243e 

TiO2 nanotubes: Structure optimization for solar cells 
Junfeng Yan and Feng Zhou 
J. Mater. Chem., 2011, 21, 9406-9418 
DOI: 10.1039/c1jm10274e 

Magnetic nanoparticles: recent advances in synthesis, self-assembly and applications 
Srikanth Singamaneni, Valery N. Bliznyuk, Christian Binek and Evgeny Y. Tsymbal 
J. Mater. Chem., 2011, Advance Article 
DOI: 10.1039/c1jm11845e 

A general strategy to prepare graphene-metal/metal oxide nanohybrids 
Junyi Ji, Guanghui Zhang, Hongyu Chen, Yang Li, Guoliang Zhang, Fengbao Zhang and Xiaobin Fan 
J. Mater. Chem., 2011, 21, 14498-14501 
DOI:10.1039/c1jm12970h 

Nanoparticles for hydrogen generation 
Christopher E. Bunker and Marcus J. Smith 
J. Mater. Chem., 2011, 21, 12173-12180 
DOI: 10.1039/c1jm10856e 

Why not take a look at the articles today and blog your thoughts and comments below.

Fancy submitting an article to Journal of Materials Chemistry ? Then why not submit to us today!

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

A trio of hot articles

Graphical abstract: UV-induced fluorescence recovery and solubility modulation of photocaged conjugated oligomersUV-induced fluorescence recovery and solubility modulation of photocaged conjugated oligomers: A series of conjugated oligomers that show both increased fluorescence efficiency and pH-dependant solubility upon UV irradiation have been designed by a team at Tufts University, USA. The team behind the research say this approach is effective at tuning the properties of conjugated organics with light after traditional synthetic operations, and has potential for use in photoactivatable fluorophores or solution-processable multilayer devices. (J. Mater. Chem., 2011, 21, 14041-14047)

Graphical abstract: Direct write tethered protein arraysDirect write tethered protein arrays: Protein arrays can be written directly onto a protein resistant surface. This approach eliminates the need for additional back-filling steps. The team behind the research say their method can tolerate a broad range of process conditions which allows the retention of proteins’ biological functionality. (J. Mater. Chem., 2011, 21, 14072-14078)

Graphical abstract: Atomic layer deposition of metal fluorides through oxide chemistryAtomic layer deposition of metal fluorides through oxide chemistry: This hot article describes the deposition of metal fluoride thin films by an atomic layer deposition process using ozone based chemistry. The team say that using hexafluoroacetylacetonate as a fluorine source increased the purity of the films by reducing the oxygen content. (J. Mater. Chem., 2011, 21, 14461-14465)

To keep up-to-date with all the latest research, sign up for the journal’s e-alerts or RSS feeds or follow Journal of Materials Chemistry on Twitter.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Hot Article: A flux coating method for upconversion crystal layers

A flux coating method for preparing high-performance upconverting crystal layers has been developed by Japanese scientists. These upconverting crystal layers could improve the absorption properties of solar cells. The method developed by the Japanese team uses a relatively low temperature of 350 °C and makes it easier to create large-scale crystal layers. These advantages should make it more feasible for use in large-scale applications. Interested to know more? Read the full article for free until 24th October:

Graphical abstract: Novel fabrication of NIR-vis upconversion NaYF4:Ln (Ln = Yb, Er, Tm) crystal layers by a flux coating method

Novel fabrication of NIR-vis upconversion NaYF4:Ln (Ln = Yb, Er, Tm) crystal layers by a flux coating method: Sayaka Suzuki, Katsuya Teshima, Toshiko Wakabayashi, Hiromasa Nishikiori, Takahiro Ishizaki and Shuji Oishi, J. Mater. Chem., 2011, 21, 13847-13852

To keep up-to-date with all the latest research, sign up for the journal’s e-alerts or RSS feeds or follow Journal of Materials Chemistry on Twitter.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Journal of Materials Chemistry poster prize winner: FLC 2011

Congratulations to Nélida Gimeno (Universidad de Zaragoza, Spain) for winning the Journal of Materials Chemistry poster prize at 13th International Conference on Ferroelectric Liquid Crystals.

Nélida Gimeno’s winning poster was entitled “Liquid Crystalline Janus-type co-dendrimers based on bent-core units“.

 Nélida Gimeno her winning poster

Nélida Gimeno with her winning poster

 Jason Morvan (Kent State University, USA) won a Soft Matter poster prize for his poster “Electro-mechanical response of electro-spum polylactic acid fibers dispersed with ferroelectric barium titanate nanoparticles”.

 The 13th International Conference on Ferroelectric Liquid Crystals was held 29th August  – 2nd September at Niagara Falls, Canada.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

2nd Unilever-RSC International Symposium on Functional Materials Science: 24th – 28th October 2011

This Symposium will feature three one day meetings that will take place at three different locations throughout China. Each one day meeting will feature a selection of lectures covering the properties and applications of many different materials given by some of the world’s leading international scientists.

  • Monday 24th October: Tsinghua University, Beijing, China
  • Wednesday 26th October: Wuhan University, Wuhan, China
  • Friday 28th October: Shanghai Jiao Tong University, Shanghai, China

 Conference website including the scientific programme

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Hot Article: Solventless hybrid grafting of antimicrobial polymers for self-sterilizing surfaces

A method of creating antimicrobial coatings on catheters using a solvent-free hybrid grafting technique has been developed by scientists at Oklahoma State University, USA. The team demonstrate that vapor-based hybrid grafting enables a one-step surface modification and creates a durable antimicrobial effect. Interested to know more? Read the full article for free until 20th October (free registration required)

Graphical abstract: Solventless hybrid grafting of antimicrobial polymers for self-sterilizing surfaces

Yumin Ye, Qing Song and Yu Mao, J. Mater. Chem., 2011, 21, 13188-13194  

To keep up-to-date with all the latest research, sign up for the journal’s e-alerts or RSS feeds or follow Journal of Materials Chemistry on Twitter.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Congratulations to the poster prize winners at ECME 2011

Congratulations to Giulia Grancini (IFN-CNR: Politecnico di Milano, Italy) and Matthijs Cox (Eindhoven University of Tecnology, The Netherlands) for winning the Journal of Materials Chemistry poster prizes at the 11th European Conference on Molecular Electronics (ECME 2011).

 Matthijs Cox with his winning poster

Matthijs Cox’s, winning poster was called “Tuning Spin Interactions in Organic Semiconductors”.

 Giulia Grancini with her winning poster

Giulia Grancini’s poster was  entitled “4D-Imaging of Interfacial Charge Transfer State in Crystalline P3HT:PCBM Blend”.

ECME 2011 was held in 7th – 10th September in Barcelona, Spain.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Welcome to our new Associate Editor, Natalie Stingelin!

I am delighted to welcome Dr Natalie Stingelin to the Journal of Materials Chemistry team as an Associate Editor. In her new role for the journal, Natalie will be handling papers in the area of organic functional materials.

Natalie is a Senior Lecturer in Organic Functional Materials at the Department of Materials, Imperial College London, UK. Prior to this appointment she conducted research at the Philips Research Laboratories, Eindhoven, the Cavendish Laboratory at the University of Cambridge, and at Queen Mary, University of London. She obtained the degree of Engineer in Materials Science in 1997, and in 2001 completed her doctoral studies, for which she was awarded the ETH Medal. Her current research interests encompass the broad field of organic functional materials, including organic electronics, multifunctional inorganic/organic hybrids, and smart, advanced optical systems based on organic matter.

Why not submit your next high impact materials chemistry paper to Journal of Materials Chemistry? Benefit from the choice of having your article handled by our team of professional editors based in our Cambridge office or one of our four Associate Editors, Vince Rotello, Ram Seshadri, Natalie Stingelin or Dongyuan Zhao.

Submit online today!

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)