Uncategorized – Page 3

Archive for the ‘Uncategorized’ Category

Energy & Environmental Science Impact Factor increases to 25.427

14 Jun 2016

Energy & Environmental Science (EES) is pleased to announce its Impact Factor has increased to 25.427*.

EES continues to lead the field as the home of extraordinarily high quality, agenda-setting research relating to energy conversion and storage, alternative fuel technologies and environmental science. This impressive Impact Factor of 25.427* and a 5-year Impact Factor of 22.118 means that research published in the journal has lasting impact. EES has strengthened yet further its position at the top of three key Journal Citation Reports categories: Energy & Fuels; Engineering, Chemical; and Environmental Sciences, and has moved up to 4th in the Chemistry, multidisciplinary category.

Our broad scope and the interdisciplinary nature of research published in the journal, coupled with our rigorous peer review and rapid times to publication of 60 days** from receipt to acceptance, ensures your work will quickly attract the attention it deserves.

We’re also excited to announce that Wolfgang Lubitz, Jenny Nelson and Yan Shao-Horn have joined the Editorial Board in 2016.

We would like to thank all our authors, readers, reviewers and editorial & advisory Board members for making EES the number 1 journal in the field

*The Impact Factor provides an indication of the average number of citations per paper. Produced annually, Impact Factors are calculated by dividing the number of citations in a year, by the number of citeable articles published in the preceding two years. Data based on 2015 Journal Citation Reports® (Thomson Reuters).

**2015 average for Full Papers

Comments Off on Energy & Environmental Science Impact Factor increases to 25.427

RSC Books on energy and environmental science

14 Sep 2015

Books in the RSC Energy and Environment Series provide up-to-date and critical perspectives reflecting the wealth of chemical ideas and concepts that have the potential to make an important impact in mankind’s search for a sustainable energy future. Books in the Series have covered energy crops, photoelectron chemical water splitting, solid oxide fuel cells and biomass conversion.

Spanning a broad range of research interests and experiences in this field, the international Series Board comprises:

Laurie Peter, University of Bath, UK, Editor-in-Chief

Heinz Frei, Lawrence Berkeley National Laboratory, USA, Series Editor

Roberto Rinaldi, Max Planck Institute for Coal Research, Germany, Series Editor

Tim S. Zhao, The Hong Kong University of Science and Technology, Hong Kong, Series Editor

Recent publications:

Materials Challenges: Inorganic Photovoltaic Solar Energy, edited by Stuart J C Irvine – an authoritative reference on the various aspects of materials science that will impact the next generation of photovoltaic module technology.

Catalytic Hydrogenation for Biomass Valorization, edited by Roberto Rinaldi – as the biorefinery industry expands to meet the latest discoveries in biomass conversion, this book provides a thorough grounding in the subject.

Advanced Concepts in Photovoltaics, edited by Arthur J. Nozik, Gavin Conibeer, Matthew C Beard – describing the diverse range of materials and fabrication methods now available to take photovoltaic systems into the third generation.

Titles you may have missed:

Solar Energy Conversion, edited by Piotr Piotrowiak – a state-of-the art review on experimental and theoretical approaches to the study of interfacial electron and excitation transfer processes which are so crucial to solar energy conversion.

Biological Conversion of Biomass for Fuels and Chemicals, edited by Jianzhong Sun, Shi-You Ding, Joy D Peterson – covers biomass modification to facilitate the industrial degradation processing and and new technologies for the conversion of lignocelluloses into biofuels and other products.

Solid Oxide Fuel Cells, edited by Meng Ni, Tim S. Zhao – an overview of the SOFC technology with a focus on the recent developments in new technologies and new ideas for addressing the key issues of SOFC development.

You can now keep up-to-date with the latest books published from the Royal Society of Chemistry with our eBook Table of Content Email Alerts. Sign up today by selecting RSC eBook Collection in the Book Alerts section on the Email Alerts Service Form.

Comments Off on RSC Books on energy and environmental science

Water splitting using a single catalyst

29 Jun 2015

Electrochemical water splitting typically requires two catalysts, one to evolve oxygen and one for hydrogen. However, scientists lead by Xile Hu at EPFL in Lausanne, Switzerland, have discovered that nickel phosphide can act as a catalyst, evolving both hydrogen oxygen from water simultaneously. Nickel phosphide was loaded onto a carbon electrode in an alkaline electrolyser which lead to the material adopting a core-shell structure, with a nickel phosphide core and an active nickel oxide species on the outside. The team observed successful water splitting, with the evolution of both hydrogen and oxygen and a current density of 10mA/cm² at a low water splitting potential of 1.63V.

Want to know more?

Read the full article in Chemistry World by Osman Mohamed.

Or, take a look at the original article which is free to access until 7th August 2015:

“Ni₂P as a Janus catalyst for water splitting: the oxygen evolution activity of Ni₂P nanoparticles” by L-A. Stern et al., DOI: 10.1039/C5EE01155H

Comments Off on Water splitting using a single catalyst

Wind-powered lighting is almost a breeze

21 Aug 2014

Scientists in South Korea have created a material that emits bright white light when a stream of nitrogen is blown over it. The discovery paves the way for eco-friendly displays and lighting systems powered by natural winds. A stream of air causes the rods to bend, emitting light from the phosphors

Mechanoluminescence, where materials emit light under mechanical stress, is not a new phenomenon; in 1605 Francis Bacon reported seeing flashes of light when he snapped sugar crystals. But, as this required the crystals to be fractured, mechanoluminescence was not thought to have any practical applications until elasto-mechanoluminescent materials were discovered in 1999. These materials emit light under elastic deformation without being destroyed, and can be used for lighting, medical imaging or even as artificial skin.

However, all of the elasto-mechanoluminescent materials discovered so far have several associated problems. One problem is the light they produce is very faint, and is usually only as bright as luminescent paint. Another problem is that the light is coloured, often green or yellow, depending on the compounds used. This is a stumbling block for applications where white light is preferable.

Both of these problems have been addressed by Soon Moon Jeong’s team from the Daegu Gyeongbuk Institute of Science and Technology. By incorporating a mixture of coloured phosphors made from copper-doped zinc sulfide into a flexible plastic polydimethylsiloxane composite, the researchers created an elasto-mechanoluminescent material that emits white light. The colour of the light can also be tuned by changing the proportion each phosphor.

Interested to find out more? Read the full article by Stephen McCarthy in Chemistry World.

Read the original article in Energy & Environmental Science:

Bright, wind-driven white mechanoluminescence from zinc sulphide microparticles embedded in a polydimethylsiloxane elastomer
Soon Moon Jeong, Seongkyu Song, Kyung-Il Joo, Joonwoo Kim, Sung-Ho Hwang, Jaewook Jeong and Hyunmin Kim
Energy Environ. Sci., 2014, Advance Article
DOI: 10.1039/C4EE01776E

Comments Off on Wind-powered lighting is almost a breeze

Aaron Wheeler interviewed in Chemistry World

25 Jul 2014

Energy and Environmental Science author Aaron Wheeler (University of Toronto) was recently interviewed in Chemistry World about his recent paper describing a technique that can screen algae with the aim of generating more efficient biofuels.

Here’s the beginning of the interview:

You recently reported an exciting technique that can screen algae grown under different wavelengths with the aim of generating more efficient biofuels.¹ Can you tell me more about this work?

Sure, this was the first time we have developed a method for the area of renewable energy. I had a student, Steve Shih, who is now a postdoc at the Joint BioEnergy Institute in California, who became interested in the idea that we can cultivate algae to produce biofuel. Of course this is an idea that has been around for a while.

So, in looking at the problem it seems that the biofuel we can collect from algae does not have the required energy density relative to the cost needed to extract and generate fuel, to compete with non-renewable resources. There are ongoing efforts to develop ways to encourage algae to generate more lipids. The idea is that the algae generate stores of lipids that we can then extract and refine into fuel.

We saw an opportunity; we thought we might be able to build a microfluidic device that could rapidly screen for conditions that folks haven’t looked at before just to see if we could find some conditions that encouraged the algae to produce more lipids. A lot of time we start these projects but don’t end up with an exciting result, but this one was really exciting in that we believe we have identified a brand new phenomenon which is that, at least for this particular algae, if you culture them under yellow light they experience some sort of stress which causes them to increase lipid production!

Visit Chemistry World now to read the rest!

1. S C C Shih et al, Energy Environ. Sci., 2014, 7, 2366 (DOI: 10.1039/c4ee01123f)

Aaron Wheeler

Comments Off on Aaron Wheeler interviewed in Chemistry World

The future is lead-free for perovskite solar cells

05 Jun 2014

A lead-free and non-toxic alternative to current perovskite solar-cell technology has been reported by researchers in the UK: tin halide perovskite solar cells. They are also cheaper to manufacture than the silicon solar cells currently dominating the market. The future is lead-free for perovskite solar cells

Nakita Noel, part of Henry Snaith’s research team at the University of Oxford, describes how perovskite materials have caused a bit of a whirlwind since they came out in 2009: ‘Everybody that’s working in the solar community is looking to beat silicon.’ Despite the high efficiency of conventional crystalline silicon solar cells (around 20%), high production and installation costs decrease their economic feasibility and widespread use.

The challenge to find a cheaper alternative led to the development of perovskite-based solar cells, as organic–inorganic metal trihalide perovskites have both abundant and cheap starting materials. However, the presence of lead in some semiconductors could create toxicology issues in the future. As Noel puts it ‘every conference you present at somebody is bound to put up their hand and ask “What about the lead – isn’t this toxic?”

Interested to find out more? Read the full article by Vicki Marshall in Chemistry World.

Read the original article in Energy & Environmental Science.

Lead-Free Organic-Inorganic Tin Halide Perovskites for Photovoltaic Applications
Nakita K. Noel, Samuel D. Stranks, Antonio Abate, Christian Wehrenfennig, Simone Guarnera, Amir Haghighirad, Aditya Sadhanala, Giles E Eperon, Sandeep K. Pathak, Michael B Johnston, annamaria petrozza, Laura Herz and Henry Snaith
Energy Environ. Sci., 2014, Accepted Manuscript
DOI: 10.1039/C4EE01076K

Comments Off on The future is lead-free for perovskite solar cells

Putting the power in power-dressing – EES article in Chemistry World

11 Feb 2014

Scientists in the UK developing wearable electronics have knitted a flexible fabric that delivers twice the power output of current energy harvesting textiles.

There is considerable interest and research into wearable piezoelectric energy harvesters that use waste energy from human movement or the ambient environment to power low-energy consuming wearable devices, such as wireless sensors and consumer electronics. Typically these materials are ceramic-based with limited flexibility, so aren’t that comfortable to wear, and include toxic elements like lead. They also involve charge-collecting metallic electrodes with poor fatigue resistance that fail after repeated use. New, less rigid materials with sufficient mechanical strength and an all-in-one design are therefore highly sought after.

The polymeric piezoelectric fibres created by Navneet Soin at the University of Bolton and colleagues in the laboratory of Elias Siores fulfill all of the above: they are flexible, strong and breathable.

Interested to know more? Read the full news article by Polly Wilson on Chemistry World here…

Read the article by N Soin et al. in EES:

Novel “3-D spacer” all fibre piezoelectric textiles for energy harvesting applications
Navneet Soin, Tahir Shah, Subhash Anand, Junfeng Geng, Wiwat Pornwannachai, Pranab Mandal, David Reid, Surbhi Sharma, Ravi Hadimani, Derman Vatansever Bayramol and Elias Siores
Energy Environ. Sci., 2014, Accepted Manuscript
DOI: 10.1039/C3EE43987A, Paper

Comments Off on Putting the power in power-dressing – EES article in Chemistry World

EES Issue 2 of 2014 out now!

04 Feb 2014

Graphical abstract: Front cover The latest issue of EES is now online. You can read the full issue here.

The outside front cover features the paper Exciton diffusion in organic photovoltaic cells by S. Matthew Menke and Russell J. Holmes.

Lead candidates for high-performance organic photovoltaics from high-throughput quantum chemistry – the Harvard Clean Energy Project is the paper highlighted on the inside front cover by Johannes Hachmann, Roberto Olivares-Amaya, Adrian Jinich, Anthony L. Appleton, Martin A. Blood-Forsythe, László R. Seress, Carolina Román-Salgado, Kai Trepte, Sule Atahan-Evrenk, Süleyman Er, Supriya Shrestha, Rajib Mondal, Anatoliy Sokolov, Zhenan Bao and Alán Aspuru-Guzik.

Issue 2 contains a number of excellent Analysis, Review and Perspective articles:

Energy demand and emissions of the non-energy sector
Vassilis Daioglou, Andre P. C. Faaij, Deger Saygin, Martin K. Patel, Birka Wicke and Detlef P. van Vuuren

Lithium metal anodes for rechargeable batteries
Wu Xu, Jiulin Wang, Fei Ding, Xilin Chen, Eduard Nasybulin, Yaohui Zhang and Ji-Guang Zhang Graphical abstract: Inside front cover

Recent progress on flexible lithium rechargeable batteries
Hyeokjo Gwon, Jihyun Hong, Haegyeom Kim, Dong-Hwa Seo, Seokwoo Jeon and Kisuk Kang

Enhancing SOFC cathode performance by surface modification through infiltration
Dong Ding, Xiaxi Li, Samson Yuxiu Lai, Kirk Gerdes and Meilin Liu

Heterogeneous nanocarbon materials for oxygen reduction reaction
Da-Wei Wang and Dangsheng Su

Directing the film structure of organic semiconductors via post-deposition processing for transistor and solar cell applications
Anna M. Hiszpanski and Yueh-Lin Loo

Comments Off on EES Issue 2 of 2014 out now!

Efficient recovery justifies silver’s use in solar cells – EES article in Chemistry World

04 Feb 2014

Silver is a scarce raw material but the first real scale study of recycling polymer solar cells reveals that its use can be sustainable.

Putting up huge nubers of solar panels every day could help address the world’s energy crisis. ‘If you want to solve big problems, then the scale of whatever you are doing is also likely to be big, and so is any waste you generate,’ explains Frederik Krebs who led the study at the Technical University of Denmark. ‘This should therefore be part of your thinking when you are developing something.’

Silver is needed for solar cell electrodes but it is also a precious metal, cutting into both the cost of production and energy payback time of mass-produced solar cells. Now, Krebs’ team has demonstrated that 95% of the silver electrodes in polymer solar cell modules can be reclaimed as silver chloride after simply shredding the modules and soaking them in nitric acid. This yield would diminish the overall energy payback time of the solar cells from 139 days to 128 days, a decrease of 8%.

Interested to know more? Read the full news article by Jennifer Newton on Chemistry World here…

Read the article by R R Søndergaard et al. in EES:

Efficient decommissioning and recycling of polymer solar cells: justification for use of silver
Roar R. Søndergaard, Nieves Espinosa, Mikkel Jørgensen and Frederik C. Krebs
Energy Environ. Sci., 2014, Advance Article
DOI: 10.1039/C3EE43746A, Communication

Comments Off on Efficient recovery justifies silver’s use in solar cells – EES article in Chemistry World

EES Issue 1 of 2014 out now!

23 Dec 2013

Graphical abstract: Front cover The latest issue of EES is now online. You can read the full issue here.

The outside front cover features the paper Energy applications of ionic liquids by Douglas R. MacFarlane, Naoki Tachikawa, Maria Forsyth, Jennifer M. Pringle, Patrick C. Howlett, Gloria D. Elliott, James H. Davis, Masayoshi Watanabe, Patrice Simon and C. Austen Angell.

Constructing ionic highway in alkaline polymer electrolytes is the paper highlighted on the inside front cover by Jing Pan, Chen Chen, Yao Li, Lei Wang, Lisheng Tan, Guangwei Li, Xun Tang, Li Xiao, Juntao Lu and Lin Zhuang.

Issue 11 contains a number of excellent Opinion, Analysis, Review, Minireview and Perspective articles:

Electrochemical energy storage in a sustainable modern society
John B. Goodenough

Reflections on the topic of solar fuels
John Meurig Thomas

The renaissance of energy innovation
Jim Skea

Piezoelectric and ferroelectric materials and structures for energy harvesting applications
C. R. Bowen, H. A. Kim, P. M. Weaver and S. Dunn

Physics and chemistry of CdTe/CdS thin film heterojunction photovoltaic devices: fundamental and critical aspects
S. Girish Kumar and K. S. R. Koteswara Rao

Upgrading of lignin-derived bio-oils by catalytic hydrodeoxygenation
Majid Saidi, Fereshteh Samimi, Dornaz Karimipourfard, Tarit Nimmanwudipong, Bruce C. Gates and Mohammad Reza Rahimpour

Carbon capture and storage update
Matthew E. Boot-Handford, Juan C. Abanades, Edward J. Anthony, Martin J. Blunt, Stefano Brandani, Niall Mac Dowell, José R. Fernández, Maria-Chiara Ferrari, Robert Gross, Jason P. Hallett, R. Stuart Haszeldine, Graphical abstract: Inside front cover Philip Heptonstall, Anders Lyngfelt, Zen Makuch, Enzo Mangano, Richard T. J. Porter, Mohamed Pourkashanian, Gary T. Rochelle, Nilay Shah, Joseph G. Yao and Paul S. Fennell

Energetic I–III–VI2 and I2–II–IV–VI4 nanocrystals: synthesis, photovoltaic and thermoelectric applications
Feng-Jia Fan, Liang Wu and Shu-Hong Yu

Lithium ion battery applications of molybdenum disulfide (MoS2) nanocomposites
Tyler Stephenson, Zhi Li, Brian Olsen and David Mitlin

Energy applications of ionic liquids
Douglas R. MacFarlane, Naoki Tachikawa, Maria Forsyth, Jennifer M. Pringle, Patrick C. Howlett, Gloria D. Elliott, James H. Davis, Masayoshi Watanabe, Patrice Simon and C. Austen Angell

The panoscopic approach to high performance thermoelectrics
Li-Dong Zhao, Vinayak P. Dravid and Mercouri G. Kanatzidis

Transparent paper: fabrications, properties, and device applications
Hongli Zhu, Zhiqiang Fang, Colin Preston, Yuanyuan Li and Liangbing Hu

Comments Off on EES Issue 1 of 2014 out now!

EES Blog