Call For Papers: Halide Perovskite Optoelectronics

Guest edited by Lakshminarayana Polavarapu, Maria Antonietta Loi, Haibo Zeng and Joseph M. Luther

We are delighted to announce a call for papers for our latest online themed collection in Nanoscale on Halide Perovskite Optoelectronics that is being guest edited by Dr Lakshminarayana Polavarapu (University of Vigo, Spain), Professor Maria Antonietta Loi (University of Groningen, Netherlands), Professor Haibo Zeng (Nanjing University, China) and Dr ‪Joseph M. Luther (National Renewable Energy Laboratory, USA‬).

Over the past decade, metal halide perovskites, both in the form of thin films and colloidal nanocrystals (NCs), have emerged as a leading candidate for optoelectronic applications because of their exciting properties including defect tolerance, long charge carrier diffusion lengths, high photoluminescence quantum yield, and facile fabrication using relatively low-cost precursors. We have witnessed a steep increase in the efficiency of perovskite optoelectronic devices such as solar cells, LEDs, and photodetectors in a short development time. Despite tremendous success in achieving efficiencies as high as those of classical semiconductors such as silicon and metal chalcogenides, perovskite optoelectronics are still suffering from long-term chemical and operational stability along with toxicity and scalability to large-area devices. Currently, perovskites (bulk and nanocrystals) and corresponding devices are undergoing further optimization regarding the composition of A, B, and X sites, surface passivation, optimization of the device architectures, interfaces, and charge transport layers, and their encapsulation. This special themed collection aims to provide a platform for the latest developments that address the challenges of halide perovskite optoelectronics. The topics of this collection, include but are not limited to,

• Composition engineering of bulk perovskite thin films for improving phase stability
• Synthesis of stable perovskite NCs by composition engineering, doping, and passivation
• Stable layered 2D (Ruddlesden–Popper (RP)) perovskite optoelectronics (solar cells LEDs, photodetectors, etc.)
• Perovskite solar cells with improved chemical and long-term stability, and efficiency
• Defect passivation of perovskite solar cells and LEDs
• Lead-free perovskite optoelectronics
• Device encapsulation
• Large-area devices

This call for papers is open for the following article types:

• Communications
• Full papers

Open for submissions until 15th December 2022

If you would like to contribute to this themed issue, you can submit your article directly through the journal’s online submission service. Please mention that this submission is a contribution to the Halide Perovskite Optoelectronics collection in the “Themed issues” section of the submission form and add a “Note to the Editor” that this is from the Open Call. The Editorial Office reserves the right to check suitability of submissions in relation to the scope of both the journal and the collection, and inclusion of accepted articles in the final themed issue is not guaranteed.

Please also note that all submissions will be subject to initial assessment and rigorous peer review to meet the usual high standards of Nanoscale and acceptance is not guaranteed.

If you have any questions about the journal or the collection, then Edward Gardner, the Development Editor for Nanoscale, would be happy to answer them. You can contact him by emailing the journal inbox.

With best wishes,

Dr Lakshminarayana Polavarapu, University of Vigo, Spain
Professor Maria Antonietta Loi, University of Groningen, Netherlands
Professor Haibo Zeng, Nanjing University, China
Dr ‪Joseph M. Luther, National Renewable Energy Laboratory, USA‬

Call For Papers: Nanomaterials for Printed Electronics

Guest edited by Cinzia Casirgahi, Oana Jurchescu, Shlomo Magdassi and Wenming Su

We are delighted to announce a call for papers for our latest online themed collection in Nanoscale on Nanomaterials for Printed Electronics that is being guest edited by Professor Cinzia Casiraghi, (University of Manchester, UK), Professor Oana Jurchescu (Wake Forest University, USA), Professor Shlomo Magdassi (Hebrew University of Jerusalem, Israel) and Professor Wenming Su (Suzhou Institute of Nano-Tech and Nano-Bionics, China).

Nanomaterials present unique physicochemical properties that make them perfect to be used as functional inks for the fabrication of printed devices. This collection brings together different types of nanomaterials for printed electronics (organic, inorganic, hybrids, etc.) and provides an overview on the most used technologies for printed electronics, with the aim of connecting different communities and identifying common challenges in the field.

This call for papers is open for the following article types:

• Communications
• Full papers

Open for submissions until 20th October 2022

If you would like to contribute to this themed issue, you can submit your article directly through the journal’s online submission service. Please mention that this submission is a contribution to the Nanomaterials for Printed Electronics collection in the “Themed issues” section of the submission form and add a “Note to the Editor” that this is from the Open Call. The Editorial Office reserves the right to check suitability of submissions in relation to the scope of both the journal and the collection, and inclusion of accepted articles in the final themed issue is not guaranteed.

Please also note that all submissions will be subject to initial assessment and rigorous peer review to meet the usual high standards of Nanoscale.

If you have any questions about the journal or the collection, then Edward Gardner, the Development Editor for Nanoscale, would be happy to answer them. You can contact him by emailing the journal inbox.

With best wishes,

Professor Cinzia Casiraghi, University of Manchester, UK
Professor Oana Jurchescu, Wake Forest University, USA
Professor Shlomo Magdassi, Hebrew University of Jerusalem, Israel
Professor Wenming Su, Suzhou Institute of Nano-Tech and Nano-Bionics, China

Call For Papers: Emerging Concepts in Nucleic Acids

Guest edited by Arun Richard Chandrasekaran, Dhiraj Bhatia, Xiaogang Liu and Prabal Maiti

We are delighted to announce a call for papers for our latest online themed collection in Nanoscale and Physical Chemistry Chemical Physics (PCCP) on Emerging Concepts in Nucleic Acids: Structures, Functions and Applications that is being guest edited by Dr Arun Richard Chandrasekaran (University at Albany, SUNY, USA), Dr Dhiraj Bhatia (IIT Gandhinagar, India), Professor Xiaogang Liu (National University of Singapore, Singapore) and Professor Prabal Maiti (Indian Institute of Science, Bangalore, India).

This cross-journal collection in Nanoscale and PCCP brings recent updates in nucleic acids research under three broad themes: structure, functions and applications. The collection focuses on self-assembly, structure-function relationships, physical chemistry and biophysics of nucleic acids, new structures and new technologies involving nucleic acid modelling and simulation and various applications in biology, medicine, robotics, materials science, computing and other fields.

This call for papers is open for the following article types:

• Communications
• Full papers

Open for submissions until 30th September 2022

If you would like to contribute to this themed issue, you can submit your article directly through the Nanoscale online submission service or the PCCP online submission service. Please mention that this submission is a contribution to the Emerging Concepts in Nucleic Acids: Structures, Functions and Applications collection in the “Themed issues” section of the submission form and add a “Note to the Editor” that this is from the Open Call. The Editorial Office reserves the right to check suitability of submissions in relation to the scope of both the journal and the collection, and inclusion of accepted articles in the final themed issue is not guaranteed.

Please also note that all submissions will be subject to initial assessment and rigorous peer review to meet the usual high standards of Nanoscale and PCCP.

If you have any questions about the journal or the collection, then Edward Gardner, the Development Editor for Nanoscale, would be happy to answer them. You can contact him by emailing the journal inbox.

With best wishes,

Dr Arun Richard Chandrasekaran (University at Albany, SUNY, USA)
Dr Dhiraj Bhatia (IIT Gandhinagar, India)
Professor Xiaogang Liu (National University of Singapore, Singapore)
Professor Prabal Maiti (Indian Institute of Science, Bangalore, India)