Author Archive

Have you seen our new Chips & Tips Facebook page?

Chips & Tips has a shiny new Facebook page!

Chips & Tips is our forum for discussing common practical problems encountered in miniaturisation labs, which are seldom reported in the literature. Check out the regularly updated blog at https://blogs.rsc.org/chipsandtips/, or visit Facebook and like us to join the discussion – we’d love to hear your tips for chips!

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Focus on German research just published

We are delighted to publish another in our series of 10th Anniversary issues, this time focussed on lab on a chip and miniaturisation technologies from research groups in Germany, guest edited by Holger Becker and Andreas Manz.

Read their editorial to learn more on the developments and collaborations within the microfluidics field in Germany, and take a look at the author profiles of the contributors to the issue.

Despite the fact that Germany is not necessarily well known for its entrepreneurial culture and abundance of venture capital investments, that we find many microfluidics service providers in Germany which manufacture devices in materials such as polymers (e.g., microfluidic ChipShop, ThinXXS, Boehringer Ingelheim microparts, Bartels Mikrotechnik) or glass (e.g., Little Things Factory, iX factory) which have been active in this field for many years.
– Holger Becker and Andreas Manz

View the issue

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Have you seen our new acoustofluidics tutorial series?

A little while ago Henrik Bruus, Jurg Dual, Jeremy Hawkes, Martyn Hill, Thomas Laurell, Johan Nilsson, Stefan Radel, Satwindar Sadhal and Martin Wiklund met at the International Centre for Mechanical Sciences in northern Italy to give a lecture series on the theory and applications of ultrasonic standing wave technology and microfluidics.  Out of this the idea for a series of tutorial papers was born, and Lab on a Chip is delighted to bring you the first few in the series:

Acoustofluidics 1: Governing equations in microfluidics
Henrik Bruus
DOI: 10.1039/C1LC20658C

Acoustofluidics 2: Perturbation theory and ultrasound resonance modes
Henrik Bruus
DOI: 10.1039/C1LC20770A

Acoustofluidics 3: Continuum mechanics for ultrasonic particle manipulation
Jurg Dual and Thomas Schwarz
DOI: 10.1039/C1LC20837C

Acoustofluidics 4: Piezoelectricity and application in the excitation of acoustic fields for ultrasonic particle manipulation
Jurg Dual and Dirk Möller
DOI: 10.1039/C1LC20913B

Don’t forget to check back soon for more articles in this exciting new area and if you have any comments on the series so far we’d love to hear them!

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Hot articles on bubble removal, microfluidic wound-healing assays, multiplexed screening and more

We’re just about to wrap up here for Christmas, but before we go we thought we’d give you some hot articles to keep you warm until the new year…

Bubbles no more: in-plane trapping and removal of bubbles in microfluidic devices
Conrad Lochovsky, Sanjesh Yasotharan and Axel Günther
DOI: 10.1039/C1LC20817A

Microfluidic approach for highly efficient synthesis of heparin-based bioconjugates for drug delivery
Thanh Huyen Tran, Chi Thanh Nguyen, Dong-Pyo Kim, Yong-kyu Lee and Kang Moo Huh
DOI: 10.1039/C1LC20769E

Microfluidic wound-healing assay to assess the regenerative effect of HGF on wounded alveolar epithelium
Marcel Felder, Pauline Sallin, Laurent Barbe, Beat Haenni, Amiq Gazdhar, Thomas Geiser and Olivier Guenat
DOI: 10.1039/C1LC20879A

Droplet-based microfluidic device for multiple-droplet clustering
Jing Xu, Byungwook Ahn, Hun Lee, Linfeng Xu, Kangsun Lee, Rajagopal Panchapakesan and Kwang W. Oh
DOI: 10.1039/C2LC20883K

A digital microfluidic method for multiplexed cell-based apoptosis assays
Dario Bogojevic, M. Dean Chamberlain, Irena Barbulovic-Nad and Aaron R. Wheeler
DOI: 10.1039/C2LC20893H

A silicone-based stretchable micropost array membrane for monitoring live-cell subcellular cytoskeletal response
Jennifer M. Mann, Raymond H. W. Lam, Shinuo Weng, Yubing Sun and Jianping Fu
DOI: 10.1039/C2LC20896B

Remember these are free to access for four weeks if you are registered with us.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Lab on a Chip Board member and Wyss Institute Founding Director Donald Ingber receives 2011 Holst Medal

Last week the Wyss Institute for Biologically Inspired Engineering at Harvard University awarded its Founding Director and Lab on a Chip Editorial Board member, Donald Ingber, M.D., Ph.D., the 2011 Holst Medal in recognition of his pioneering work exploring the cellular mechanisms that contribute to mechanical control of tissue and organ development, and his groundbreaking development of bioinspired technologies, ranging from organ-on-chip replacements for animal studies, to new engineering approaches for whole organ engineering.

The award was presented on December 16th at the High Tech Campus Eindhoven in the Netherlands during a ceremony at the close of the 2011 Holst Symposium, which focused on integrated heart repair. As the medal winner, Ingber also presented the 2011 Holst Memorial Lecture entitled “From Cellular Mechanotransduction to Organ Engineering.” Starting with an exploration of the role that cell structure and mechanics play in controlling tissue and organ development, Ingber’s lecture extended to provide a more comprehensive overview of his most recent innovations, including development of organ-on-chip microsystems technologies that recapitulate human organ functions, bioinspired materials that promote whole tooth organ formation, and injectable programmable nanotherapeutics that restore blood flow to occluded blood vessels.

“Donald Ingber has made groundbreaking contributions to the understanding of the mechanobiology of cellular behavior,” said Joep Huiskamp, Secretary of the Holst Memorial Lecture Award Committee 2011, on its behalf. “Ingber’s recent development of a breathing lung-on-a-chip concept is an outstanding example of convergent technologies.”

This year’s Holst events were dedicated to the global health issue of heart disease, in recognition of its enormous emotional, medical, economical, and societal implications. The symposium brought together a few select leading international experts, including Wyss Institute core faculty member Kevin Kit Parker, Ph.D., to discuss key facets of heart disease, regeneration, and repair.  Parker’s work on engineering heart tissues recently featured on the Issue 24 cover of Lab on a Chip (see Ensembles of engineered cardiac tissues for physiological and pharmacological study: Heart on a chip).

Donald Ingber, together with Lab on a Chip Chair George Whitesides, will be guest editor of our final 10th Anniversary issue focusing on the USA which has the theme of translating research from the lab to the clinic, to be published next year.

Adapted from the Wyss Institute press release

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Micro diagnostic technologies set to make a macro impact on African health

By Kevin Land (CSIR) and Jan Korvink (IMTEK/FRIAS)

The first International Workshop on Microsystems Technologies for African Health took place in South Africa from the 7 – 11 September 2011, at a conference venue bordering the Kruger National Park. The workshop was situated in the heart of the Bushbuck Ridge community, a rural area where diseases such as HIV/AIDS, malaria and tuberculosis are common. The setting provided the ideal context for the workshop, bringing together diverse experts from all over the world to discuss strategies for developing medical diagnostic solutions.

People in both diagnostic and microsystems fields attended the workshop to formulate the need for diagnostic tools that would not only function in a well-equipped laboratory environment, but also in rural clinics and remote surroundings, where energy and water supplies are not guaranteed and where the population needs to be educated in considering these diseases as serious problems.

Delegates visited the Belfast Clinic: a typical example of a rural clinic in resource-limited areas of South Africa.

The workshop was preceded by a visit to a rural medical clinic, where delegates experienced the conditions and infrastructure available, providing a typical example of the various rural clinics found in South Africa and in other developing countries.  To thank the clinic for the invaluable exposure to this reality, attendees contributed towards a collection at the closing of the workshop to enable a filing cabinet to be purchased and donated to the clinic to assist with patient data management.

The workshop opened with presentations by South African government representatives who depicted the country´s research infrastructure to the international delegates. In South Africa the burden of diseases is the driving force behind research, particularly in the fields of energy and health. South Africa spends more of its national resources than other countries in Africa in Research and Development, and as such envisages itself as an African leader in science and technology research. By encouraging local and international collaborations between universities and other research institutions, the governmental research organizations strive in a concerted effort to approach and eventually solve these detrimental health problems.

Delegates from India and Malaysia showed that a number of infectious diseases are not inherent to the African continent but are a burden across South-East Asia. Poverty in the majority of the population hinders access to health care in most Asian and African countries. In India, for instance, 75% of the population cannot spend more than a total of 20 € per year on medical assistance, which can be classified as health care, diagnosis, or treatment. This implies that this majority percentage of the population (equaling approximately 900 million people in India alone) will not have access to health care.  In addition, poverty and lack of access to the health system by the greater part of the population results in many diseases being under-diagnosed, meaning that the full extent of the burden of these diseases is unknown in Africa and South-East Asia.  This emphasizes the vital need for a collaborative and systemic approach in addressing health issues, as well as for lower cost diagnostic tools for diagnosing diseases in resource poor populations.

During the sessions and discussions on the first day of the workshop it became clear that the major challenges in the development of new diagnostic tools would be the implementation of these tools in a feasible manner in resource poor populations.  Having listened to the needs stated by the South African government representatives and the clinicians, and having visited a rural clinic and laboratory – clarifying the limitations of scientific and medical possibilities in rural areas in Africa – several of the engineering delegates adapted their presentations for the next sessions, omitting costly and complicated solutions and focusing on the ones that could have an impact for rural and remote surroundings such as those found throughout Africa.

Low cost Lab-on-a-CD technologies courtesy of Marc Madou (University of California)

The presentations by micro-engineers, chemists, physicists and biochemists focused on microsystems devices, microfluidics and lab-on-a-chip technologies suitable for diagnostics in underdeveloped regions. Many competing technologies were described that could be, or have been, applied to HIV/AIDS, tuberculosis or malaria testing. These included the lab-on-a-disc CD platform using centrifugal micro-fluidics, and paper-based micro-fluidic devices making use of wicking as the driving force, either in the form of simple one-dimensional devices or devices with more intricate designs. These technologies are designed to be complimented by appropriate biochemical assays that detect diseases using biomarkers. Methods making use of colour changes, electrical charges, and fluorescence were presented as possible detection techniques.

Examples of paper-based technologies being developed for low-cost and disposable implementation of disease diagnostics. Courtesy of Paul Yager (University of Washington)

Many of the technologies presented can be or have the potential to be connected to a cell phone. This could provide an ideal platform for use in regions where medical and transport infrastructures are missing, but where the mobile phone network infrastructure is intact and comparable to developed countries, as is the case in Africa. By leveraging cell phones as a platform for medical diagnostics, connectivity between the clinician or nurse performing the test and a central laboratory making the diagnosis and collecting important statistical data can be realized. Smartphones have considerable computing power to perform image analysis, and built-in cell phone cameras can be adapted to function as microscope objectives. Publications using these ideas have already been written, and show the potential of cell phones to become efficient front-ends for driving sophisticated diagnostics into the rural medical system.

The potential of using mobile phones as a link between the developing world and access to improved and efficient healthcare.

This unique workshop, which combined the knowledge of leading scientists from diverse disciplines, stimulated the delegates into widespread discussions, not only during the workshop sessions, but also during open discussion rounds, meals, breaks and the excursions to the rural clinic and laboratory.  As a consequence the researchers established new scientific networks, and believe that stemming from these networks, more focused research projects will evolve that may have a positive impact on the disease burden in Africa. It was decided to start a website forum for the community which aims to simplify the network of key players, document specifications and standards and advertise opportunities for internships, jobs, projects, funding, and clinical studies.  It was decided to repeat the workshop in 2013, with the aim to include delegates from more African countries, and to form a workshop committee that represents the key players in this arena. A website (https://sites.google.com/site/micromedcomms/) for the next workshop will be launched early in 2012, and will give updated information and the chance for participants to provide inputs.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Random microfluidic models and silica nanofluidic devices for DNA analysis on the cover of Issue 2

Highlighted on the outside front cover of Issue 2 we have work from Keith Neeves and colleagues creating random models of complex porous media to study microfluidic flow under more realistic settings.  They based the structure of their porous media on an algorithm developed from two-dimensional Voronoi diagrams to better simulate the geometries found in media such as soil, sands, sedimentary rock or biological tissues.

Single- and two-phase flow in microfluidic porous media analogs based on Voronoi tessellation
Mengjie Wu, Feng Xiao, Rebecca M. Johnson-Paben, Scott T. Retterer, Xiaolong Yin and Keith B. Neeves
DOI: 10.1039/C1LC20838A

On the inside front cover, Anders Kristensen and colleagues depict the fabrication of silica nanofluidic devices for single-molecule studies.  The purely inorganic silica can be fusion bonded and has low autofluorescence and provides a cheaper alternative to top-down processing of fused silica or silicon substrate imprints of sol–gel silica.

All-silica nanofluidic devices for DNA-analysis fabricated by imprint of sol–gel silica with silicon stamp

Morten Bo Mikkelsen, Alban A. Letailleur, Elin Søndergård, Etienne Barthel, Jérémie Teisseire, Rodolphe Marie and Anders Kristensen
DOI: 10.1039/C1LC20689C

As with all our cover articles, these are free to access for 6 weeks.

View the rest of the issue here

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Lab on a Chip awards prizes at µTAS 2011

Lab on a Chip awarded some of the most prestigious awards in the miniaturisation sector at the recent µTAS 2011 conference in Seattle, USA .

Editor of the journal Harp Minhas was delighted to announce the winners of the Pioneers of Miniaturisation Prize (supported by Corning Inc), the Widmer Young Researcher Poster Prize and the Art in Science Award (co-sponsored by NIST).

Professor Ali Khademhosseini (Harvard-MIT, USA) received the Pioneers of Miniaturisation Prize, which recognises outstanding achievements and significant contributions to the understanding and advancement of micro- and nano-scale science.

For more details about the Pioneers of Miniaturisation Prize and how to nominate a fellow scientist for next year’s award, please see here.

From left: Harp Minhas (Editor Lab on a Chip), Ali Khademhosseini (2011 prize winner), Po Ki Yuen (Corning Inc)

This year’s Widmer Young Researcher Poster Prize went to Akwasi Apori from Professor Amy Herr’s lab at the University of California, Berkeley, for his poster entitled ‘Brain injury screening diagnostics for emergency medicine: quantitation of cerebrospinal fluid specific proteins in human nasal discharge’.

Dong Jin Shin (Johns Hopkins University, USA) received the Art in Science Award for the submission of the best scientific image titled ‘Yin and Yang in a Droplet’.

The fluorescence image is a snapshot of the mixing of two types of quantum dots inside a sessile droplet with the assistances of a micro magnetic gyromixer. The micro magnetic gyromixer spins on the curved droplet surface to balance itself through gyroscopic effect and to improve the mixing rate. Two small drips of quantum dot solution are added to a sessile droplet, the patterns of QD streamlines during mixing resemble the Yin and Yang pattern. (Image by Yi Zhang)

Yin and Yang in a Droplet

Congratulation to all winners!

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Nominations for the 2012 RSC Prizes and Awards now open

Nominations for the 2012 RSC Prizes and Awards close on the 15 January 2012

Our Prizes and Awards represent the dedication and outstanding achievements and are a platform to showcase inspiring science to gain the recognition deserved. Don’t forget to nominate colleagues who have made a significant contribution to advancing the chemical sciences.

View our full list of Prizes and Awards and use the online system to nominate a colleague.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Lab on a Chip Issue 1 just published!

Welcome to the first 2012 issue of Lab on a Chip

On the front cover of our first issue of Volume 12 an the article from Neus Sabaté et al. on their fuel cell-powered microfluidic platform for lab-on-a-chip applications.  This hot article was recently highlighted in Chemistry World.

Fuel cell-powered microfluidic platform for lab-on-a-chip applications
Juan Pablo Esquivel, Marc Castellarnau, Tobias Senn, Bernd Löchel, Josep Samitier and Neus Sabaté
DOI: 10.1039/C1LC20426B

On the inside front cover we have an image from Eric Stava et al. showing their work on the mechanical actuation of ion channels using a piezoelectric planar patch clamp system.

Mechanical actuation of ion channels using a piezoelectric planar patch clamp system
Eric Stava, Minrui Yu, Hyun Cheol Shin, Hyuncheol Shin, Jonathan Rodriguez and Robert H. Blick
DOI: 10.1039/C1LC20636B

In this issue we also have the editorial introduction from Editor Harp Minhas – Meeting the challenge – discussing our new developments and plans for the coming year, we think it’s going to be an exciting one!

Take a look at the issue

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)