Improving catalytic performance of (L)-proline with chiral additives

This article is HOT as recommended by the referees. And we’ve made it free to access for 4 weeks.

(L)-proline is a common organocatalyst used in synthetic reactions to produce chiral molecules as it is cheap and readily available. However, it is not very efficient, and there has been much interest in optimising its performance. One method is the modification of (L)-proline through a redesign and resynthesis, which can be quite complex. An easier alternative is to find additives that can improve the reaction in terms of yield and selectivity.

In this paper, the authors synthesised and investigated the effects of a chiral additive, enantiopure substituted imidazoles, on the (L)-proline-catalyzed aldol reaction. They found that it has greatly improved the selectivity of the reaction and the reaction rate. Addition studies of the reaction mechanism suggests that the supramolecular complex formed by the imidazole and (L)-proline helps to improve the efficiency of the catalyst. Further work on different co-catalysts can open up many more reactions in which (L)-proline can be used as an effective catalyst.

Chemoenzymatic synthesis of optically active 2-(2′- or 4′-substituted-1H-imidazol-1-yl)cycloalkanols: chiral additives for (L)-proline

Read the paper and find out more.

Chemoenzymatic synthesis of optically active 2-(2′- or 4′-substituted-1H-imidazol-1-yl)cycloalkanols: chiral additives for (L)-proline
Raul Porcar, Nicolás Ríos-Lombardía, Eduardo Busto, Vicente Gotor-Fernández, Vicente Gotor, Eduardo Garcia-Verdugo, M. Isabel Burguete and Santiago V. Luis
Catal. Sci. Technol., 2013, Advance Article
DOI: 10.1039/C3CY00107E, Paper

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Highly cited 2012 articles

The following is ten of the most cited articles published in Catalysis Science and Technology in 2012. Read what has been making an impact in the world of catalysis.

Highly cited 2012 articles

Graphene-based materials for catalysis
Bruno F. Machado and Philippe Serp
Catal. Sci. Technol., 2012, 2, 54-75
DOI: 10.1039/C1CY00361E

Recent advances in organocatalytic asymmetric Michael reactions
Yong Zhang and Wei Wang
Catal. Sci. Technol., 2012, 2, 42-53
DOI: 10.1039/C1CY00334H

Organocatalytic enantioselective methodologies using Morita–Baylis–Hillman carbonates and acetates
Ramon Rios
Catal. Sci. Technol., 2012, 2, 267-278
DOI: 10.1039/C1CY00387A

Ag nanoparticles decorated polyaniline nanofibers: synthesis, characterization, and applications toward catalytic reduction of 4-nitrophenol and electrochemical detection of H2O2 and glucose
Guohui Chang, Yonglan Luo, Wenbo Lu, Xiaoyun Qin, Abdullah M. Asiri, Abdulrahman O. Al-Youbi and Xuping Sun
Catal. Sci. Technol., 2012, 2, 800-806
DOI: 10.1039/C2CY00454B

Conversion of lignocellulose into renewable chemicals by heterogeneous catalysis
Hirokazu Kobayashi, Hidetoshi Ohta and Atsushi Fukuoka
Catal. Sci. Technol., 2012, 2, 869-883
DOI: 10.1039/C2CY00500J

Asymmetric catalysis using iron complexes – ‘Ruthenium Lite’?
Muftah Darwish and Martin Wills
Catal. Sci. Technol., 2012, 2, 243-255
DOI: 10.1039/C1CY00390A

Iron(III) metal–organic frameworks as solid Lewis acids for the isomerization of α-pinene oxide
Amarajothi Dhakshinamoorthy, Mercedes Alvaro, Hubert Chevreau, Patricia Horcajada, Thomas Devic, Christian Serre and Hermenegildo Garcia
Catal. Sci. Technol., 2012, 2, 324-330
DOI: 10.1039/C2CY00376G

Aerobic oxidation of 5-hydroxylmethylfurfural with homogeneous and nanoparticulate catalysts
Basudeb Saha, Saikat Dutta and Mahdi M. Abu-Omar
Catal. Sci. Technol., 2012, 2, 79-81
DOI: 10.1039/C1CY00321F

Speciation of Pd(OAc)2 in ligandless Suzuki–Miyaura reactions
Luis A. Adrio, Bao N. Nguyen, Gemma Guilera, Andrew G. Livingston and King Kuok (Mimi) Hii
Catal. Sci. Technol., 2012,2, 316-323
DOI: 10.1039/C1CY00241D

Metal–organic frameworks for catalysis: the Knoevenagel reaction using zeolite imidazolate framework ZIF-9 as an efficient heterogeneous catalyst
Lien T. L. Nguyen, Ky K. A. Le, Hien X. Truong and Nam T. S. Phan
Catal. Sci. Technol., 2012,2, 521-528
DOI: 10.1039/C1CY00386K

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Top ten most accessed articles in March

This month sees the following articles in Catalysis Science & Technology that are in the top ten most accessed:-

Nickel nanoparticles catalyse reversible hydration of carbon dioxide for mineralization carbon capture and storage 
Gaurav A. Bhaduri and Lidija Šiller   
Catal. Sci. Technol., 2013,3, 1234-1239 
DOI: 10.1039/C3CY20791A  

A review of controllable synthesis and enhancement of performances of bismuth tungstate visible-light-driven photocatalysts 
Liwu Zhang and Yongfa Zhu  
Catal. Sci. Technol., 2012,2, 694-706 
DOI: 10.1039/C2CY00411A  

Graphene-based materials for catalysis 
Bruno F. Machado and Philippe Serp  
Catal. Sci. Technol., 2012,2, 54-75 
DOI: 10.1039/C1CY00361E  

New trends in the synthesis of crystalline microporous materials 
Giuseppe Bellussi, Angela Carati, Caterina Rizzo and Roberto Millini  
Catal. Sci. Technol., 2013,3, 833-857 
DOI: 10.1039/C2CY20510F  

Advances in conversion of hemicellulosic biomass to furfural and upgrading to biofuels 
Saikat Dutta, Sudipta De, Basudeb Saha and Md. Imteyaz Alama   
Catal. Sci. Technol., 2012,2, 2025-2036 
DOI: 10.1039/C2CY20235B  

High CO2 and CO conversion to hydrocarbons using bridged Fe nanoparticles on carbon nanotubes 
Justin P. O’Byrne, Rhodri E. Owen, Daniel R. Minett, Sofia I. Pascu, Pawel K. Plucinski, Matthew D. Jones and Davide Mattia  
Catal. Sci. Technol., 2013,3, 1202-1207 
DOI: 10.1039/C3CY20854K  

Direct C–H bond arylations and alkenylations with phenol-derived fluorine-free electrophiles 
Sergei I. Kozhushkov, Harish Kumar Potukuchi and Lutz Ackermann  
Catal. Sci. Technol., 2013,3, 562-571 
DOI: 10.1039/C2CY20505J  

Copper N-heterocyclic carbene complexes in catalysis 
Jonathan D. Egbert, Catherine S. J. Cazin and Steven P. Nolan  
Catal. Sci. Technol., 2013,3, 912-926 
DOI: 10.1039/C2CY20816D  

Diesel fuel from biomass 
Carlo Perego and Marco Ricci   
Catal. Sci. Technol., 2012,2, 1776-1786 
DOI: 10.1039/C2CY20326J  

Design of hierarchical zeolite catalysts by desilication 
Danny Verboekend and Javier Pérez-Ramírez 
Catal. Sci. Technol., 2011,1, 879-890 
DOI: 10.1039/C1CY00150G  

Why not take a look at the articles today and blog your thoughts and comments below.

Fancy submitting an article to Catalysis Science & Technology? Then why not submit to us today or alternatively email us your suggestions.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

A Green Cocktail for the Industrial Synthesis of Lactic acid

Shreesha Bhat is a medicinal chemist pursuing his M.S.(Pharm.) in Medicinal Chemistry at the National Institute of Pharmaceutical Education and Research, India

Posted on behalf of Shreesha Bhat

Lactic acid is a versatile chemical having wide applications in food, cosmetics and chemical industry. They are generally prepared by acid catalyzed reactions of hexoses and trioses, and one such triose i.e. glycerol has been found to be produced in surplus amounts as byproducts in production of biodiesel. Glycerol offers great potential to be used as a renewable feedstock for the production of various value-added products like lactic acid.

So far, base catalysts have not been explored for this purpose, except for the hydrothermal conversion of glycerol to lactic acid using alkali metal catalysts like NaOH/KOH. This method presents several drawbacks for the industrial synthesis like harsh reaction conditions (excess temperature, excess amount of strong base, etc.) and cost-intensive isolation of soluble alkali metal lactates (excess catalysts) which is highly uneconomical. As a solution to this problem, scientists at Graz University of Technology, Austria have come up with a “green” method for the industrial synthesis of lactic acid by mixing a cocktail of dihydroxyacetone and calcium hydroxide.

Glycerol to lactic acid

The sparingly soluble calcium hydroxide facilitates the easy removal of excess catalyst by simple mechanical filtration making this a highly economical and industrial friendly method. Another component of the cocktail Dihydroxyacetone– is easily obtained by the microbial oxidation of glycerol in high yields, thus reducing the glycerol burden in the biodiesel industry.

The present paper discusses the catalytic effects of various earth metal hydroxides like barium hydroxide, calcium hydroxide and magnesium hydroxide on the lactic acid formation from dihydroxyacetone. The screening studies indicate that calcium hydroxide is highly selective towards formation of lactic acid owing to its chelation properties. The intriguing mechanism of lactic acid formation by alkali earth metal catalysis was investigated by the means of mechanistic and kinetic studies which suggested two major pathways for lactate synthesis. It was found that the temperature differences play an important role in the preference of the reaction to proceed via either pathway. Various other studies like the effect of concentration of catalyst, feed concentration, temperature variations provide a detailed insight into the synthesis of lactic acid from dihydroxyacetone.

The extensive studies done by the Austrian scientists, has not only provided a potential solution to the enigmatic problem of industrial synthesis of lactic acid, but has also provided a way to recycle the surplus glycerol into a high value product like lactic acid.

To know how the green cocktail made its way to become an industrially feasible method for the synthesis of lactic acid, read the article:

Synthesis of lactic acid from dihydroxyacetone: use of alkaline earth-metal hydroxides
Susanne Lux and Matthäus Siebenhofer
Catal. Sci. Technol., 2013, DOI: 10.1039/c3cy20859a

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Platinum ‘peanuts’ to make better fuel cells

Sara Coles is a guest web-writer for Catalysis Science & Technology. She currently works for Johnson Matthey in Royston, UK.

Shape controlled synthesis of catalytically active metal nanostructures is an important field of scientific research for both industry and academia. The arrangement of atoms on the particle surface is believed to play a critical role in the adsorption and desorption of substrates and products – which in turn affects the activity and selectivity of the catalyst. The chance to fine-tune these properties is too good to miss.

With this aim in mind, Sourov Ghosh and colleague, working in India, have experimented with different ways to shape platinum nanoparticles. Their report in Catalysis Science & Technology explains how they Platinum peanut shaped nanoparticles performing hydrogenation and oxygen reductionmade and characterised ‘peanut-like’ and ‘dendrimer-like’ platinum nanoparticles to compare their performance in the hydrogenation of unsaturated alcohols and, supported on carbon nanotubes, in the oxygen reduction reaction (ORR).

The peanut-like particles showed significantly higher specific activity towards the ORR than the aggregated dendrimer-like particles or conventional quasispherical platinum nanoparticles. This makes them a promising choice for the fuel cell cathode due to their ability to promote faster electron transfer kinetics.

Read more about this work in the full paper.

Shape-controlled synthesis of Pt nanostructures and evaluation of catalytic and electrocatalytic performance
Sourov Ghosh and C. Retna Raj
Catal. Sci. Technol., 2013, 3, 1078, DOI: 10.1039/c2cy20652h

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Top ten most accessed articles in February

This month sees the following articles in Catalysis Science & Technology that are in the top ten most accessed:-

Nickel nanoparticles catalyse reversible hydration of carbon dioxide for mineralization carbon capture and storage 
Gaurav A. Bhaduria and Lidija Šiller 
Catal. Sci. Technol., 2013,3, 1234-1239 
DOI: 10.1039/C3CY20791A  

Graphene-based materials for catalysis 
Bruno F. Machadoab and Philippe Serp 
Catal. Sci. Technol., 2012,2, 54-75 
DOI: 10.1039/C1CY00361E  

Advances in conversion of hemicellulosic biomass to furfural and upgrading to biofuels 
Saikat Dutta, Sudipta De, Basudeb Saha and Md. Imteyaz Alam 
Catal. Sci. Technol., 2012,2, 2025-2036 
DOI: 10.1039/C2CY20235B  

Functional group dependence of the acid catalyzed ring opening of biomass derived furan rings: an experimental and theoretical study 
Christopher R. Waidmann, Aaron W. Pierpont, Enrique R. Batista, John C. Gordon, Richard L. Martin, L. A. “Pete” Silks, Ryan M. Westd and Ruilian Wu 
Catal. Sci. Technol., 2013,3, 106-115 
DOI: 10.1039/C2CY20395B  

High CO2 and CO conversion to hydrocarbons using bridged Fe nanoparticles on carbon nanotubes 
Justin P. O’Byrne, Rhodri E. Owen, Daniel R. Minett, Sofia I. Pascu, Pawel K. Plucinski, Matthew D. Jones and Davide Mattia 
Catal. Sci. Technol., 2013,3, 1202-1207 
DOI: 10.1039/C3CY20854K  

Emerging catalytic processes for the production of adipic acid 
Stijn Van de Vyvera and Yuriy Román-Leshkov 
Catal. Sci. Technol., 2013, Advance Article 
DOI: 10.1039/C3CY20728E  

Direct C–H bond arylations and alkenylations with phenol-derived fluorine-free electrophiles 
Sergei I. Kozhushkov, Harish Kumar Potukuchia and Lutz Ackermann 
Catal. Sci. Technol., 2013,3, 562-571 
DOI: 10.1039/C2CY20505J  

Role of mixed metal oxides in catalysis science—versatile applications in organic synthesis 
Manoj B. Gawande, Rajesh K. Pandeyb and Radha V. Jayaram 
Catal. Sci. Technol., 2012,2, 1113-1125 
DOI: 10.1039/C2CY00490A  

Metal–organic frameworks as catalysts: the role of metal active sites 
Pieterjan Valvekens, Frederik Vermoortelea and Dirk De Vos 
Catal. Sci. Technol., 2013, Advance Article 
DOI: 10.1039/C3CY20813C  

Metal–organic frameworks as heterogeneous catalysts for oxidation reactions 
Amarajothi Dhakshinamoorthy, Mercedes Alvaroa and Hermenegildo Garcia 
Catal. Sci. Technol., 2011,1, 856-867 
DOI: 10.1039/C1CY00068C   

Why not take a look at the articles today and blog your thoughts and comments below.

Fancy submitting an article to Catalysis Science & Technology ? Then why not submit to us today or alternatively email us your suggestions.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

A Fine Catalysis Meeting in Sicily

The second “FineCat – Symposium on heterogeneous catalysis for fine chemicals” was held in Palermo, Italy, on April 10-11, 2013. With delegates coming from all over the world, it was two intense days of lectures and poster presentations. Some of the topics covered included biomass conversion, flow chemistry, catalysis with metal nanoparticles, heterogeneous photocatalysis and doped hybrid silicas. A poster prize was also offered, which Natcha Wongpraphairoat from Chulalongkorn University, Thailand, won with her poster on the the catalytic conversion of glycerol to propylene glycol over supported copper/ZnO catalysts.

To find out more about the conference, a more detailed report can be found here, or you can download the conference report in pdf.

Next year’s conference will be held Sicily on April 9-10, 2014, with further details here. So if you are interested in catalysis, why not consider a working holiday in Sicily next year?

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Green synthesis of polyurea with microwaves

This article is HOT as recommended by the referees. And we’ve made it free to access for 4 weeks.

Polyureas, which contain the –NHCONH– unit in their backbone, have a wide variety of uses, such as in foams, fibres and biomedical applications. Traditionally, they are made via a process that uses toxic carbonylating agents such as phosgene or isocyanate, and the by-products of the reaction are also hard to recycle. Needless to say, it would be desirable to produce polyureas by a more environmentally friendly method.

In this paper, the authors report one such technique. They have synthesised a polyurea, [6]-oligourea, with a microwave assisted method that uses a green carbonylating agent and an organocatalyst. After optimising the experimental conditions, they found that with 10W of fixed-mode microwave energy applied to the reactants, they were able to achieve almost 100% yield. The by-products of the reaction are also more easily recycled than from traditional methods.

This synthetic method opens the way to producing polyureas in a eco-friendly, efficient way.

Highly efficient isocyanate-free microwave-assisted synthesis of [6]-oligourea

Read their paper to find out more:

Highly efficient isocyanate-free microwave-assisted synthesis of [6]-oligourea
Abdussalam K. Qaroush, Asmaa S. Al-Hamayda, Yasmeen K. Khashman, Sergei I. Vagin, Carsten Troll and Bernhard Rieger
Catal. Sci. Technol., 2013, Advance Article
DOI: 10.1039/C3CY00117B, Paper

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Cleaner diesel engines – not just a pipe dream!

This article is HOT as recommended by the referees. And we’ve made it free to access for 4 weeks.

Selective catalytic reduction (SCR) to date presents the most promising deNOx technology for diesel engines.  Removal of NOx from diesel exhaust is problematic due to the wide temperature range (373–923 K) at which diesel engines operate.  This is due to inefficient conversion at low temperature (below 423 K) with the commonly used ionic exchanged zeolites or low selectivity to N2 with supported MnOx catalysts.

In this HOT article, Tanaka et al. found that the temperature had a significant effect on the photocatalytic reactions in the gas phase over a TiO2 photocatalyst with a maximum conversion of 84% (at GHSV 100,000 h-1 and 433 K).  The amount of NH3 at high temperature was found to be key to a high NO conversion.  The results provide evidence of the potential practicality of the use of photo-SCR for diesel engines.

Effects of reaction temperature on photocatalytic activity

Effects of reaction temperature on photocatalytic activity

Read more about these developments in photocatalysis by downloading the article now:

Effects of reaction temperature on the photocatalytic activity of photo-SCR of NO with NH3 over a TiO2 photocatalyst
Akira Yamamoto, Yuto Mizuno, Kentaro Teramura, Tetsuya Shishido and Tsunehiro Tanaka
Catal. Sci. Technol., 2013, Advance Article
DOI: 10.1039/C3CY00022B

This article is part of a themed issue on photocatalysis that is due to be published later this year.

You may also be interested in a perspective recently published by the same author on the subject:

A unique photo-activation mechanism by “in situ doping” for photo-assisted selective NO reduction with ammonia over TiO2 and photooxidation of alcohols over Nb2O5
Tetsuya Shishido, Kentaro Teramura and Tsunehiro Tanaka
Catal. Sci. Technol., 2011, 1, 541-551
DOI: 10.1039/C1CY00104C, Perspective

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Tannins help in biphasic catalysis

There are pros and cons to both homogeneous and heterogeneous catalytic strategies. One way to get the best of both worlds is to use aqueous-organic biphasic catalysis. This approach hasn’t been widely utilised so far due to interfacial resistance between the phases which causes a low catalytic activity.

Researchers in China have overcome this by using tannins from Black Wattle (an acacia tree species). The tannins “amphiphilicly” stabilise catalytic palladium nanoparticles enabling them to catalyse reactions in the organic phase whilst remaining in the aqueous phase for subsequent re-use, without loss of activity.

Read the full article here:

Using plant tannin as natural amphiphilic stabilizer to construct aqueous-organic biphasic system for highly active and selective hydrogenation of quinoline
Hui Mao, Jun Ma, Yang Liao, Shilin Zhao and Xuepin Liao
Catal. Sci. Technol., 2013, DOI:10.1039/C3CY00108C

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)