CrystEngComm Editor’s choice

In this Editor’s choice post, Professor Nicola Pinna, a member of  the CrystEngComm Editorial Board, talks about his favourite articles published in the journal in recent months. Nicola has chosen the most interesting articles in the area of controlled growth of nanostructured materials.  

Faegheh Hoshyargar, Enrico Mugnaioli, Robert Branscheid, Ute Kolb, Martin Penthofer and Wolfgang Tremel 
CrystEngComm, 2014, DOI:  10.1039/C4CE00326H    

Mechanistic analyses of nanoscale transformations are not easily accessible, however this case reported by Hoshyargar and co-workers is an exception as the authors managed to follow the transformation of tungsten oxide nanostructures to WS2 hollow particles. The starting material was synthesized by my favourite approach: a simple, solvothermal treatment of a tungsten alkoxide in benzyl alcohol, with the well-defined tungsten oxide nanoplatelets being subsequently converted to WS2 by sulfidization at higher temperature. The growth mechanism was investigated by applying advanced electron microscopy techniques at different stages of the solid state reaction. The final product, the “hollow rectangular WS2 nanoboxes”, was shown to be formed by “a cascade” of topotactic and epitactic processes. What I found the most astonishing was the last step of the mechanism, involving the fusion of the layered WS2 sheets forming almost perfect rectangular boxes with 90° kinks (see figure below).

layered tungsten sulfide sheets


Unconventional upright layer orientation and considerable enhancement of proton–electron conductivity in Dion–Jacobson perovskite thin films
Tomohiko Nakajima, Kiyoshi Kobayashi, Kentaro Shinodaa and Tetsuo Tsuchiyaa
CrystEngComm, 2014, 16, 4113-4119

Single crystal substrates are generally needed for growth of single-crystalline and highly-oriented oxide thin films. However, such an approach cannot be used in industrial applications for which the growth of highly-oriented oxide thin films should take place on common substrates. In this article, Nakajima et al. show that by pulsed laser-assisted annealing of an oxide precursor thin film that is spin coated from a molecular precursor solution, single crystalline RbCa2Nb3O10 layered perovskite thin films can be obtained. The peculiarity of these films is that they show upright layer orientations (see figure below) which may allow for them to be used as membranes for fuel cells due to the potential for high proton conductivity in the interlayer sites. The unusual orientation of the films is possibly connected to oxygen deficiencies near the surface which as caused by the high laser power needed to obtain the upright layer orientation.

layered perovskite thin films


Layered titanosilicates for size- and pattern-controlled overgrowth of MFI zeolite
Stanislav Ferdov
CrystEngComm, 2014, DOI10.1039/C3CE42644K

There is a need for controlling the growth of zeolites on different substrates which can only be achieved by understanding of the heterostructural interconnections between the support and the zeolite material.  This is particularly relevant for industrial applications such as catalysis. In this work, Stanislav Ferdov reports that plate-like crystals of two titanium silicates can act as interesting substrates for the controlled growth of an MFI-type zeolite. The different arrangement of the SiO4 tetrahedra and TiO6 octahedra in the two chosen titanosilicates govern the overgrowth behaviour. In one case, the plate-like crystals of the titanosilicate (20–40 μm) are covered with a monolayer of regularly packed-zeolite crystals (see figure below left). In the second case, the support acts as a single-nucleation site and only isolated and larger crystals of MFI zeolite are observed (see figure below right). Although the possibility for controlling the overgrowth of zeolites has clearly been demonstrated, the opportunity for improvement is huge. It can only be successful, however, if combined with a molecular-scale understanding of the heterostructural interconnections between substrate and zeolite.

MFI zeolites on layered titanosilicates


Ligand dynamic effect on phase and morphology control of hexagonal NaYF4
Suli Wu, Ye Liu, Jie Changa and Shufen Zhang 
CrystEngComm, 2014, DOI10.1039/C4CE00109E

It is well accepted that the adsorption of stabilizing ligands at the surface of nuclei dramatically influences the growth habit of inorganic nanocrystals. The organic–inorganic interface present in these systems is the key to the synthesis of morphology controlled nanocrystals. Ligands can selectively adsorb onto particular facets hindering the growth in the direction perpendicular to that facet. However, the adhesion energy of the ligands should be adjusted to allow dynamic adsorption-desorption during nanoparticle growth, as demonstrated in the past for the synthesis of quantum dots. More importantly, it has also been demonstrated that, for the same functional group, the dynamic effect on the surface of quantum dot nanocrystals is significantly influenced by the ligand chain length. In this article, the authors investigate the effect of the alkyl chain length of carboxylic acid ligands on the growth of NaYF4 nanocrystals. The much more mobile hexanoic acid (HA) does not effectively passivate the {001} facets leading to rod-shape nanoparticles. With longer alkyl chains ligands, the growth along the c-axis is decreased (see figure below) and the morphology can be almost continuously tuned from rods to very thin disk-shaped crystals. The authors attribute such precise morphology control to the different ligand dynamic as, for longer alkyl chain ligands, the tendency of leaving the (001) crystal surfaces decreases leading to a lower growth on the [001] direction.

hexagonal NaYF4


Nicola PinnaNicola Pinna studied physical chemistry at the Université Pierre et Marie Curie (Paris). He received his Ph.D. in 2001 and in 2002 moved to the Fritz Haber Institute of the Max Planck Society (Berlin). In 2003, he joined the Max Planck Institute of Colloids and Interfaces (Potsdam) before moving to the Martin Luther University, Halle-Wittenberg, as an Assistant Professor of Inorganic Chemistry in 2005. From March 2006 to June 2012 he was researcher at the Department of Chemistry and CICECO of the University of Aveiro and from September 2009 to June 2012 he was also Assistant Professor at the school of chemical and biological engineering Seoul National University. In July 2012 he joined the Department of Chemistry of the Humboldt University in Berlin. His research activity is focused on the development of novel routes to nanostructured materials, their characterization, and the study of their physical properties.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Crystal structures unpacked

Written by Hamish Crawford for Chemistry World

A researcher in the UK has shed new light on which interactions are important in the packing of crystal structures.1

Robin Taylor from the Cambridge Crystallographic Data Centre (CCDC) analysed the line-of-sight interactions between the most common elements found in organic crystal structures. He found that the probability of an interaction taking place boils down to the exposed surface area an atom presents. With 137,560 appropriate crystals available from the Cambridge Structural Database, and the inclusion of several statistical considerations, Taylor was able to keep potential sources of uncertainty to a minimum.

Interested? If so, read the full article at Chemistry World.

Interactions may be longer than the sum of Van der Waals radii yet still play a significant stabilising role

Interactions may be longer than the sum of Van der Waals radii yet still play a significant stabilising role

 The original article can be accessed below:

Which intermolecular interactions have a significant influence on crystal packing?
Robin Taylor
CrystEngComm, 2014, Advance Article
DOI: 10.1039/C4CE00452C

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

How to print a crystal in 3D

Written by Elisabeth Ratcliffe for Chemistry World

Rather than looking at a crystal on a screen, print it out and hold it in your hand

Scientists in the US have devised a method for printing three dimensional models of crystals using a 3D printer, the original CIF file and freely available software that can be run on standard operating systems.

Crystallographers like to picture complex crystal structures in three dimensions. Many use software that allows them to visualise the structures in a virtual space, but a better option would a physical model that you could hold in your hand.

Interested? Read the full article at Chemistry World.

The original article can be read below:

How to Print a Crystal Structure Model in 3D
Teng-Hao Chen, Semin Lee, Amar H Flood and Ognjen Miljanic  
CrystEngComm, 2014, Accepted Manuscript
DOI: 10.1039/C4CE00371C

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

HOT articles for April

Modulating the solubility of sulfacetamide by means of cocrystals
N. Rajesh Goud, Ronaq Ali Khan and Ashwini Nangia
CrystEngComm, 2014, Advance Article
DOI: 10.1039/C4CE00103F

 

Graphical Abstract

Free to access until 23rd May 2014


Nucleation and crystal growth of amorphous nilutamide – unusual low temperature behavior
Niraj S. Trasi and Lynne S. Taylor
CrystEngComm, 2014, Advance Article
DOI: 10.1039/C4CE00118D

Graphical Abstract

Free to access until 15th May 2014


Tröger’s base quasiracemates and crystal packing tendencies
Jacob T. Cross, Nicholas A. Rossi, Mateusz Serafin and Kraig A. Wheeler
CrystEngComm, 2014, Advance Article
DOI: 10.1039/C4CE00323C

Graphical Abstract

Free to access until 15th May 2014


When two symmetrically independent molecules must be different: “Crystallization-induced diastereomerization” of chiral pinanyl sulfone
Olga A. Lodochnikova, Valeriya A. Startseva, Liliya E. Nikitina, Andrei V. Bodrov, Alexander E. Klimovitskii, Evgenii N. Klimovitskii and Igor A. Litvinov
CrystEngComm, 2014, Advance Article
DOI: 10.1039/C3CE42642D   

Graphical Abstract

Free to access until 15th May 2014


Pressure-induced isostructural phase transition of a metal–organic framework Co2(4,4′-bpy)3(NO3)4·xH2O
Mi Zhou, Kai Wang, Zhiwei Men, Chenglin Sun, Zhanlong Li, Bingbing Liu, Guangtian Zou and Bo Zou
CrystEngComm, 2014, Advance Article
DOI: 10.1039/C3CE42607F

Graphical Abstract

Free to access until 15th May 2014

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Improving the solubility of the drug furosemide

Furosemide is a loop diuretic (a ‘water pill’) used to treat congestive heart failure, oedema and sometimes hypertension.  It can also be used to reduce bleeding in horses during horseracing and is banned from use for this purpose in the UK. The bioavailability of the drug when taken orally is limited by the relatively low solubility. 

Formation of co-crystals with the co-formers caffeine or cytosine improves solubility (by 6 or 11 times) but the co-crystals suffer from low stability so are not suitable for pharmaceutical use.

A new paper takes a different approach, using salt formation as an alternative to co-crystal formation. Sodium and potassium salts of furosemide were prepared and their solubilities and stabilities assessed.  The solubility of the sodium salt (furo-Na-trihydrate) was over 4000 times higher than that of the free drug, while the potassium salt (furo-K-monohydrate) was over 10000 times more soluble.

Both salts show improved stability compared to the co-crystals – at 40 °C and 75% humidity furo-Na-trihydrate is stable for 2 weeks and furo-K-monohydrate is stable for 1 week.

Improving solubility of the drug furosemide

The authors conclude that the low cost of preparation and the enhanced solubility and stability of the salts merits their consideration for use in oral drug formulations.

For more information see the paper:

High solubility crystalline hydrates of Na and K furosemide salts
U. B. Rao Khandavilli, Swarupa Gangavaram, N. Rajesh Goud, Suryanarayan Cherukuvada, S. Raghavender, Ashwini Nangia, Sulur G. Manjunatha, Sudhir Nambiar and Sharmistha Pal
CrystEngComm, 2014, DOI: 10.1039/C3CE42347F

——————————————————————————————————————————————————————-

Gwenda KydGwenda Kyd has a PhD in metallocarborane chemistry from the University of Edinburgh. Other research work includes the spectroscopic study of the structure of glasses and organometallic electron-transfer reactions and the preparation of new inorganic phosphors. Currently, she is writing a book on chemicals from plants

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Caffeine-fuelled fix for runaway eye treatment

Written by Jenifer Mizen for Chemistry World

Eye infection treatments that resist being blinked away could be formulated by cocrystallising an antibiotic with caffeine.

Cocrystallising sulfacetamide (left) with caffeine (right) makes it less soluble

Sulfacetamide (SACT) is often lost on blinking and in tears when applied as a treatment for conjunctivitis and other ocular ailments. This leads to the inconvenience and complications of applying larger and more frequent doses of SACT….’

Interested? Read the full article at Chemistry World.

Please click on the below title to access the original article.

Modulating the solubility of Sulfacetamide by means of cocrystals
Ashwini Nangia, Rajesh Goud and Ronaq Ali Khan  
CrystEngComm, 2014, Accepted Manuscript
DOI: 10.1039/C4CE00103F, Paper

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

New Editor for CrystEngComm

Posted on behalf of Jamie Humphrey

I am delighted to announce the appointment of Sarah Ruthven as Editor for CrystEngComm.

Sarah joined the Royal Society of Chemistry in 2005 where she has been responsible for the successful development of journals such as Green Chemistry and Photochemical & Photobiological Sciences. In recent years, Sarah launched RSC Advances which has now become the largest journal published by the Royal Society of Chemistry!

Sarah will be supported by Deputy Editor, Fiona McKenzie and Development Editor, Guy Jones; in addition to Editorial Production Manager, Andrew Shore and his team of Publishing Editors. I strongly believe that with Sarah’s high enthusiasm and exceptional record of “getting things done”, CrystEngComm will thrive.

Some of you may be wondering what I will be doing as I am no longer CrystEngComm Editor. I recently accepted a position as Publisher here at the Royal Society of Chemistry, with the overall responsibility for about a third of our journals, including CrystEngComm.  My move from Editor to Publisher is with mixed feelings. I am very excited about my new role however I will very much miss the day-to-day involvement with the journal and crystal engineering community.  My time as CrystEngComm Editor has been immensely enjoyable, and I owe you all a great deal of thanks for making it so and for all your support for the journal. Thank you!

 With thanks

 Jamie

Sarah Ruthven Sarah Ruthven Jamie HumphreyJamie Humphrey

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

HOT articles for March

These articles are HOT as recommended by the referees. And we’ve made them free to access for the next 4 weeks!

From discovery to scale-up: α-lipoic acid:nicotinamide co-crystals in a continuous oscillatory baffled crystalliser
Lihua Zhao, Vishal Raval, Naomi E. B. Briggs, Rajni M. Bhardwaj, Thomas McGlone, Iain D. H. Oswald and Alastair J. Florence
CrystEngComm, 2014, Advance Article
DOI: 10.1039/C4CE00154K

Graphical Abstract

Free to access until 8th May 2014


Pharmaceutical co-crystals – are we there yet?
N. Blagden, S. J. Coles and D. J. Berry
CrystEngComm, 2014, Advance Article
DOI: 10.1039/C4CE00127C

Graphical Abstract

Free to access until 8th May 2014


Nucleation and crystal growth of amorphous nilutamide – unusual low temperature behavior
Niraj S. Trasi and Lynne S. Taylor
CrystEngComm, 2014, Advance Article
DOI: 10.1039/C4CE00118D

Graphical Abstract

Free to access until 8th May 2014


Tröger’s base quasiracemates and crystal packing tendencies
Jacob T. Cross, Nicholas A. Rossi, Mateusz Serafin and Kraig A. Wheeler
CrystEngComm, 2014, Advance Article
DOI: 10.1039/C4CE00323C

Graphical Abstract

Free to access until 8th May 2014


Three metal–organic frameworks based on the semirigid V-shaped 5-(3-amino-tetrazole-5-phenoxy)-isophthalic acid ligand: syntheses, topological structures and properties
Kang Liu, Yu Peng, Fen Yang, Dingxuan Ma, Guanghua Li, Zhan Shi and Shouhua Feng  
CrystEngComm, 2014, Advance Article
DOI: 10.1039/C4CE00105B

Graphical abstract

Free to access until 16th April 2014


Unconventional upright layer orientation and considerable enhancement of proton–electron conductivity in Dion–Jacobson perovskite thin films
Tomohiko Nakajima, Kiyoshi Kobayashi, Kentaro Shinoda and Tetsuo Tsuchiya  
CrystEngComm, 2014, Advance Article
DOI: 10.1039/C3CE42418A

Graphical abstract

Free to access until 16th April 2014

 


The role of a liquid in “dry” co-grinding: a case study of the effect of water on mechanochemical synthesis in a “L-serine–oxalic acid” system
Evgeniy A. Losev and Elena V. Boldyreva  
CrystEngComm, 2014, Advance Article
DOI: 10.1039/C3CE42321B

Graphical abstract

Free to access until 11th April 2014


Achieving single domain relaxor-PT crystals by high temperature poling
Fei Li, Linghang Wang, Li Jin, Zhuo Xu and Shujun Zhang  
CrystEngComm, 2014,16, 2892-2897
DOI: 10.1039/C3CE42330A

Graphical abstract

Free to access until 11th April 2014


Synthesis, characterization and selective hysteretic sorption property of metal–organic frameworks with 3,5-di(pyridine-4-yl)benzoate
Pei-Pei Cui, Yue Zhao, Gao-Chao Lv, Qing Liu, Xiao-Liang Zhao, Yi Lu and Wei-Yin Sun  
CrystEngComm, 2014, Advance Article
DOI: 10.1039/C3CE42260G 

Graphical abstract

Free to access until 4th April 2014


Investigation of the effect of liquid–liquid phase separation (LLPS) on nucleation and different growth stages of vanillin and bulk growth of defect-free single crystals from aqueous solution – a new approach
P. Parimaladevi, C. Kavitha and K. Srinivasan  
CrystEngComm, 2014,16, 2565-2569
DOI: 10.1039/C3CE42416B 

Graphical abstract

Free to access until 4th April 2014


Synthesis and luminescence of uniform europium-doped bismuth fluoride and bismuth oxyfluoride particles with different morphologies
Alberto Escudero, Elisa Moretti and Manuel Ocaña  
CrystEngComm, 2014, Advance Article
DOI: 10.1039/C3CE42462F

Graphical abstract

Free to access until 4th April 2014


Metal–organic calixarene capsules: the evolution of controlled assembly
Piotr P. Cholewa and Scott J. Dalgarno  
CrystEngComm, 2014, Advance Article
DOI: 10.1039/C3CE42169D

Graphical abstract

 

Free to access until 4th April 2014


Utilising hinged ligands in MOF synthesis: a covalent linking strategy for forming 3D MOFs
Campbell J. Coghlan, Christopher J. Sumby and Christian J. Doonan
CrystEngComm, 2014, Advance Article
DOI: 10.1039/C4CE00181H

 

Graphical Abstract

Free to access until 28th April 2014


Polymorphism in cocrystals: a review and assessment of its significance
Srinivasulu Aitipamula, Pui Shan Chow and   Reginald B. H. Tan
CrystEngComm, 2014, Advance Article
DOI: 10.1039/C3CE42008F

Graphical Abstract

Free to access until 28th April 2014

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Top Ten most accessed CrystEngComm articles from October to December 2013

During October, November and December, the following articles were the Top Ten most accessed:

Layered organic–inorganic hybrid perovskites: structure, optical properties, film preparation, patterning and templating engineering
Ziyong Cheng and Jun Lin  
CrystEngComm, 2010, 12, 2646-2662
DOI: 10.1039/c001929a

Self-assembled structures of CuO primary crystals synthesized from Cu(CH3COO)2–NaOH aqueous systems
Xiaoxue Xu, Hong Yang and Yinong Liu  
CrystEngComm, 2012, 14, 5289-5298
DOI: 10.1039/c2ce25420d

Activation of metal–organic framework materials
Joseph E. Mondloch, Olga Karagiaridi, Omar K. Farha and Joseph T. Hupp  
CrystEngComm, 2013, 15, 9258-9264
DOI: 10.1039/c3ce41232f

Metal–organic frameworks (MOFs) based on mixed linker systems: structural diversities towards functional materials
Ritesh Haldar and Tapas Kumar Maji  
CrystEngComm, 2013, 15, 9276-9295
DOI: 10.1039/c3ce41438h

Surfactant-free CuO mesocrystals with controllable dimensions: green ordered-aggregation-driven synthesis, formation mechanism and their photochemical performances
Shaodong Sun, Xiaozhe Zhang, Jie Zhang, Liqun Wang, Xiaoping Song and Zhimao Yang  
CrystEngComm, 2013, 15, 867-877
DOI: 10.1039/c2ce26216a

Porous aromatic frameworks: Synthesis, structure and functions
Teng Ben and Shilun Qiu  
CrystEngComm, 2013, 15, 17-26
DOI: 10.1039/c2ce25409c

Synthesis of graphene–ZnO nanorod nanocomposites with improved photoactivity and anti-photocorrosion
Zhang Chen, Nan Zhang and Yi-Jun Xu  
CrystEngComm, 2013, 15, 3022-3030
DOI: 10.1039/c3ce27021a

Facile synthesis of core–shell–satellite Ag/C/Ag nanocomposites using carbon nanodots as reductant and their SERS properties
Yuan Zhang, Chaosheng Xing, Deli Jiang and Min Chen
CrystEngComm, 2013, 15, 6305-6310
DOI: 10.1039/c3ce40664d

Morphology control of ZnO with citrate: a time and concentration dependent mechanistic insight
Somnath Das, Kingshuk Dutta and Amitava Pramanik  
CrystEngComm, 2013, 15, 6349-6358
DOI: 10.1039/c3ce40822a

Structural design of coordination polymers
Miao Du, Rahul Banerjee and George K. H. Shimizu  
CrystEngComm, 2013, 15, 9237-9238
DOI: 10.1039/c3ce90156d

Please leave your comments or thoughts on any of these articles in the comment box below.

Do you have an article that you would like to submit to CrystEngComm? Why not submit to us here today?

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Organic waveguide materials made from caffeine

Posted on behalf of Josh Campbell, web writer for CrystEngComm 

Researchers in the field of nanophotonics aim to control photons or optical energies at the nanometre scale by using devices; typically 1D nanomaterials such as nanotubes or nanowires. Due to the nanoscopic nature of such materials, the quantum confinement effect allows fascinating properties to emerge which can be harnessed to produce ultra-fast, low-power and interference-free devices.

An integral part of any nanophotonic device is the waveguide, a physical structure that guides the photons to their target location. Waveguides can be active, guiding photons via coupling mechanisms, or passive, propagating the source light directly through the material.

Of all the classes of waveguide materials, inorganic devices are the most common, however recent research into waveguides made from small molecule organics is gaining traction. The advantages of these organic devices over existing inorganic materials are that they are easier to produce and have tuneable properties arising from greater variations in molecular structure.

For the emerging field of biophotonics, biocompatibility is a key requirement, with non-toxic pharmaceutical molecules being a logical fit for the role but not having been well explored.

Organic molecules tested as waveguides

In a recent article in CrystEngComm, researchers from the Rajadurai and Chandrasekar groups evaluated three pharmaceutical molecules as biophotonic devices: caffeine, carbamazepine and gilbenclamide, with nanoscale samples of each molecule grown via drop-casting on a clean glass slide.

The researchers found that crystal growth was governed by kinetic factors which often left the sample with defects which are compounded by defects created by the source of radiation used to examine the structures. To overcome this, the authors used a novel method of Raman laser light confinement to characterise the compounds.

All three molecules exhibited tubular morphologies which, in the case of carbamazepine, measured hundreds of microns in length. Passive waveguiding was observed via 2D optical confinement in all samples and no unnatural defects were observed when the samples were subjected to Raman spectroscopy.

The potential of these materials to act as biocompatible optical waveguides will hopefully bring the first biophotonic nano-devices significantly closer to realisation.

Read the full article now for more details: 

Passive optical waveguiding tubular pharmaceutical solids and Raman spectroscopy/mapping of nano-/micro-scale defects
Naisa Chandrasekhar, E. Ramanjaneya Reddy, Muvva D. Prasad, Marina S. Rajadurai and   Rajadurai Chandrasekar 
CrystEngComm, 2014, DOI: 10.1039/C4CE00084F


Josh Campbell Josh Campbell is a PhD student, currently at the University of Southampton, UK studying crystal structure prediction of organic semiconductors. He received his BSc from the University of Bradford.
Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)