Archive for the ‘#RSCAppliedfirst50’ Category

Meet the Authors – ‘Algae-derived partially renewable epoxy resin formulation for glass fibre reinforced sustainable polymer composites’

RSC Applied Polymers has published its first articles. To celebrate this we wish to introduce some of our #RSCAppliedfirst50 authors and their recently published articles.

In this post we feature corresponding author Dr Baris Kumru for the article Algae-derived partially renewable epoxy resin formulation for glass fibre reinforced sustainable polymer composites.

 


An Introduction to ‘Algae-derived partially renewable epoxy resin formulation for glass fibre reinforced sustainable polymer composites’ by Dr Baris Kumru.

Polymers are pivotal parts in modern composite systems. In this study, we investigate the potential use of renewable thermosets as composite matrix.

In this study, we attempt to investigate the potential of algae-derived epoxidized phloroglucinol (PHTE) as a potential substitute of diglycidyl ether of Bisphenol-A in commercial laminating systems (Epikote/Epikure 04908) which uses linear amines as fast-curing agents. Throughout a comparative study, we performed resin engineering to optimize PHTE resin recipe, and followed by glass fibre reinforced composite formation. It is seen that PHTE offers better thermomechanical properties than Bisphenol-based resin, which opens the door for sustainable composite generation.

We will continue to screen a library of renewable epoxy systems for composite formation. We will translate resin engineering into composite systems which is vital in composite manufacturing. Additionally, we work on frontal polymerization for composite generation and vitrimeric composite systems, where we will merge our findings into these activity areas.

As ‘Sustainable Composites’ special issue highlights, that the sustainability of composites utterly rely on new sustainable chemistries. Despite many articles focusing on renewable resin synthesis, their translation into composite manufacturing faces many hurdles. Bridging composite expertise with chemistry is the key to form scalable sustainable composites. For this reason, I urge everyone in chemistry, engineering, industry and government with a resin-composite research to openly collaborate on a large scale. If we want to construct a sustainable world by all means (chemical industry, materials, composites…) we should put aside egos and start collaborating for our future!

 


 

 

 

Dr Baris Kumru

Dr Baris Kumru

 

Dr. Baris Kumru studied chemistry (BSc and MSc) at Istanbul Technical University in Turkey between 2010-2016. Then, he obtained his PhD in 2019 at Max Planck Institute of Colloids and Interfaces. Since April 2022 he is an assistant professor at Delft University of Technology in the Faculty of Aerospace Engineering. His current interests are photoactive composites from nano to macroscale, sustainable polymers and polymer composites for aerospace applications, functional polymer design, polymer based catalysts and frontal polymerization where he and his team develop materials both for academic and industrial interest.

 

 

 

 

 

 


 

 

An algae-derived partially renewable epoxy resin formulation for glass fibre-reinforced sustainable polymer composites.

Dimitrios Apostolidis, William E. Dyer, Clemens A. Dransfelda and Baris Kumru

RSC Appl. Polym., 2024, Advance Article. DOI: 10.1039/D3LP00174A

Graphical abstract: An algae-derived partially renewable epoxy resin formulation for glass fibre-reinforced sustainable polymer composites

 

 


 

RSC Applied Polymers is a leading international journal for the application of polymers, including experimental and computational studies on both natural and synthetic systems. In this journal, you can discover cross-disciplinary scientific research that leverages polymeric materials in a range of applications. This includes high impact advances made possible with polymers across materials, biology, energy applications and beyond.

Meet the Authors – ‘Radical Polymers in Optoelectronic and Spintronic Applications’

RSC Applied Polymers has published its first articles. To celebrate this we wish to introduce some of our #RSCAppliedfirst50 authors and their recently published articles.

In this post we feature the contributing authors for the article ‘Radical Polymers in Optoelectronic and Spintronic Applications’

 


An Introduction to ‘Radical Polymers in Optoelectronic and Spintronic Applications’ by Bryan W. Boudouris and Hyunki Yeo.

This manuscript provides a status update regarding stable open-shell macromolecular materials. Radical polymers stand apart for their potential as solid-state conducting materials, due to their distinct charge transport mechanism, promising optical properties, and paramagnetic open-shell structures derived from their singly occupied molecular orbital energy levels. Beginning with an exploration of their synthetic methods and the underlying charge transport mechanisms, the discussion then shifts to the significant development in solid-state optoelectronic materials. Ultimately, the discussion concludes by highlighting the emerging roles of these materials in spintronic applications, showcasing their recognition especially within the context of next-generation quantum information systems. In conclusion, callouts are sent out for various research communities to dive into open-shell macromolecules, with the aspiration that this effort offers essential contexts and references to stimulate advancements in this field. This approach seeks to unleash the full potential of radical polymers (and organic radicals in a wider scope), in terms of pioneering scientific contributions and societal influence.

 


 

Professor Bryan W. Boudouris

Professor Bryan W. Boudouris

 

 

Bryan W. Boudouris is the R. Norris and Eleanor Shreve Professor in the Charles D. Davidson School of Chemical Engineering and a professor (by courtesy) in the Department of Chemistry at Purdue University where he is also the inaugural Associate Vice President for Strategic Interdisciplinary Research. He recently served on an Intergovernmental Personnel Act (IPA) assignment as a Program Director in the Division of Materials Research at the National Science Foundation from 2020-2022. He received his B.S. in Chemical Engineering from the University of Illinois at Urbana-Champaign in 2004. After receiving his Ph.D. in Chemical Engineering from the University of Minnesota in 2009, he conducted postdoctoral research from 2009 to 2011 at the University of California, Berkeley and Lawrence Berkeley National Laboratory. Since joining Purdue University in 2011, he has been the recipient of a number of awards including the AFOSR YIP award, the DARPA YFA, the NSF CAREER Award, the AIChE Owens Corning Early Career Award, the Saville Lectureship at Princeton University, and the John H. Dillon Medal from the APS.

 

 

 

Dr Suman Debnath

Dr Suman Debnath

 

 

Suman Debnath is currently a postdoctoral researcher in the Charles D. Davidson School of Chemical Engineering at Purdue University. He obtained his B.Sc. Degree in chemistry from the University of Burdwan in 2011 and his M.Sc. degree in Organic Chemistry from Visva-Bharati University, Bolpur, Santiniketan in 2013. He received his Ph.D. degree in Polymer Sciences from Rajiv Gandhi Institute of Petroleum Technology (An institute of national importance, Government of India) in 2020. His current research focuses on polymer functional materials and photoelectric devices.

 

 

 

 

 

Dr Baiju P. Krishnan

Dr Baiju P. Krishnan

 

 

 

 

Baiju P. Krishnan received his M.S. degree from the University of Calicut, India in 2008. He later completed his Ph.D. at the Indian Institute of Science Education and Research Thiruvananthapuram (IISER TVM), India, under the supervision of Professor Kana M. Sureshan in 2017. He was a postdoctoral researcher at Leibniz Institute for New Materials (INM)- Saarbrücken, Germany (2017–2020) and Martin Luther University of Halle-Wittenberg (MLU), Halle, Germany (2021–2022). He is currently a postdoctoral researcher at Purdue University. His research interests include supramolecular chemistry, stimuli-responsive polymers, and chemical reactions in confined environments.

 

 

 

 

 

 

 

Hyunki Yeo

Hyunki Yeo

 

 

 

Hyunki Yeo, born in Seoul, South Korea, demonstrated early interest in chemical engineering, commencing his educational journey at Korea University. Following mandatory military service at Capitol Defense, he pursued an M.S. degree at the same institution under the guidance of Dr. Joona Bang and Dr. Anzar Khan. He joined Purdue University for his doctoral studies in 2020. His research focus encompasses polymer synthesis, characterization, and applications.

 

 

 

 

 

 

 


 

Radical polymers in optoelectronic and spintronic applications.

Hyunki Yeo,  Suman Debnath, Baiju P. Krishnan and Bryan W. Boudouris.

RSC Appl. Polym., 2024, Advance Article. DOI: 10.1039/D3LP00213F

 

 

Graphical abstract: Radical polymers in optoelectronic and spintronic applications

 


 

RSC Applied Polymers is a leading international journal for the application of polymers, including experimental and computational studies on both natural and synthetic systems. In this journal, you can discover cross-disciplinary scientific research that leverages polymeric materials in a range of applications. This includes high impact advances made possible with polymers across materials, biology, energy applications and beyond.

 

Meet the authors – ‘Application of molecularly imprinted polymers (MIPs) as environmental separation tools’

RSC Applied Polymers has published its first articles. To celebrate this we wish to introduce some of our #RSCAppliedfirst50 authors and their recently published articles.

In this post we feature the contributing authors for the articleApplication of molecularly imprinted polymers (MIPs) as environmental separation tools

 


An Introduction to ‘Application of molecularly imprinted polymers (MIPs) as environmental separation tools’ by Dr. George Z. Kyzas

Molecularly imprinted polymers technology is experiencing rapid growth in multiple scientific disciplines. Molecular imprinted polymers (MIPs) are synthetic polymers that are carefully constructed to possess specific pores matching the structure of the target material, displaying a remarkable selectivity toward it. In recent times, MIPs have emerged as valuable tools for the recovery of environmental pollutants due to their adsorption capabilities and adaptability to specific target pollutants. However, their environmental application has typically centered on various aspects, including the synthesis of MIPs, preparation methods, analysis methods, matrices and MIP components. One notable challenge in this regard is optimizing the interaction between monomers and functional groups.

Given the dearth of comprehensive reviews on the application of MIPs as environmental separation tools, especially regarding the critical role of functional groups, this review is structured to outline the interactions between primary functional groups and monomers and how these functional groups impact MIP performance. Additionally, we offer insights into how functional groups can significantly enhance the imprinting effect, resulting in a markedly increased imprinting factor and specific rebinding capacity. The results revealed that the monomers utilized in MIPs for non-covalent molecular imprinting procedures include MAA, 2-VP, dopamine, and styrene. Additionally, a crosslinker is employed to establish non-covalent interactions, with EGDMA being the most commonly used crosslinker. The majority of porogens utilized in MIP synthesis is acetonitrile.

The exceptional selectivity and sensitivity offered by MIPs have proven advantageous in numerous areas. To further enhance their properties, there is significant potential for introducing innovative approaches in the synthesis of MIPs by using diverse monomers and alternative solvents instead of the typical ones. By embracing green synthesis techniques, such as utilizing renewable reagents, minimizing the overall quantity of necessary reagents, and adopting safer analytical procedures, it is possible to implement approaches that prioritize sustainability and establish a “non-toxic” environment. Additionally, to impart new and desirable properties, MIPs can be integrated with inorganic materials like gold, silver or iron oxide nanoparticles, which display responsiveness to external physical stimuli. As we look towards the future, a higher demand for the utilization of green synthesis methods alongside MIP sample preparation techniques is anticipated.

This approach aligns with the principles of waste reduction, cost-effectiveness, ecological compatibility, production safety and conformance with sustainable chemistry. It is crucial to establish techniques that are both friendly to the environment and efficient for supervising food safety, addressing pollution and health concerns. The implementation of extraction systems based on MIPs will support the creation of analytical approaches that are eco-friendly, cost-effective, and fast by minimizing solvent usage. Ongoing research focuses on creating nano- or magnetic materials that can enhance the efficiency and capacity of analyte sorption.


 

 

Dr. Despina A. Gkika

Dr. Despina A. Gkika

 

Dr. Despina A. Gkika is an Economist and a researcher at the Chemistry Department of International Hellenic University. She graduated from the Business Economics Department, University of Portsmouth in UK and received her PhD on the Cost Profile of Nanomaterials from the University of Antwerp in Belgium, in 2021. She then worked as a postdoctoral researcher at the Chemistry Department of the International Hellenic University. Her research concentrates on the economic and sustainability assessment and on the interaction between economy, technology and environment. Her scientific interests concern the collaboration surrounding techno-economic analysis of adsorbent and photocatalytic materials for use in wastewater treatment.  She is interested in conceptual and methodological aspects of assessing sustainability, therefore she uses (i) systemic techno-economic assessments (TEA); (ii) sustainability assessment methods, which brings economic, social and environmental information together (techno-economic assessment (TEA), life cycle costing (LCC), and cost-benefit analysis (CBA). Her work is recognized with (>310 citations, h index:8) based on Google Scholar database. She has published more than 30 scientific papers in high-quality academic journals Additionally, she has (co)authored 9 book chapters. She has been a reviewer in high impact journals published by Elsevier, Springer and Frontiers.

 

 

 

Dr. Athanasia Tolkou

Dr. Athanasia Tolkou

 

Dr. Athanasia Tolkou is Chemist and Adjunct Professor at the Department of Chemistry at the International Hellenic University (IHU). She is now working at the Department of Chemistry (International Hellenic University, Kavala, Greece), as Postdoctoral Researcher (since 2021). Her research interests include wastewater treatment, municipal, industrial and hazardous wastewater treatment technologies (coagulation/flocculation, adsorption, ozonation, membrane bioreactors), recovery of nutrients (phosphates, nitrates) from wastewater and removal of ions, heavy metals and dyes from water and wastewater. Her scientific work has been published in more than 50 Papers in international journals, while she published 3 Chapters in scientific Books. Her work is widely recognized with 667 Citations (h-index 16) in Scopus and 940 Citations (h-index 18) in Google Scholar. She was/is the Guest Editor of 3 Special Issues and She is a reviewer in over 30 international scientific journals (Elsevier, Springer, Wiley, Taylor & Francis, Mdpi etc). She has also participated in about 17 research projects related to her field. She has research experience in the Technical University of Hamburg (Germany), Laboratory of Water Resources and Water Supply and at the University of Insubria, Varese (Italy) Department of Theoretical and Applied Sciences. She has also teaching experience in the Department of Chemistry of the University Maria Curie-Skłodowska, Lublin, Poland.

 

 

Prof. Dr. Dimitrios N. Bikiaris

Prof. Dr. Dimitrios N. Bikiaris

 

 

Prof. Dr. Dimitrios N. Bikiaris is Chemist and Full Professor at the Chemistry Department of Aristotle University of Thessaloniki (https://bikiarislab.wixsite.com/bikiarislab). His research interests include the synthesis and characterization of polyesters and copolymers, biobased polymers, preparation and characterization of composites and nanocomposites, polymer blends, 3D printing, polymer recycling, modification of natural polymers, use of polymers for contaminants removal, microplastics and application of new biocompatible polymers in tissue engineering and pharmaceutical technology. His scientific work has been published in more than 543 scientific papers in international scientific journals, with over 25000 citations, and h-index 84 (scopus). He was participated in 66 research projects and he holds 15 international and 2 Greek patents. He has participated in more than 150 international and 50 national conferences, has been reviewer in more than 170 international journals and member of editorial committees in 15 scientific journals. His name is included in the list of World Top 2% Scientists, which is compiled by the Stanford University (USA) based on standardized citation indicators.

 

 

 

 

Assoc. Prof. Dr. Dimitra Lambropoulou

Assoc. Prof. Dr. Dimitra Lambropoulou

 

 

Assoc. Prof. Dr. Dimitra Lambropoulou is Chemist and Asscoiate Professor on Environmental Chemistry in the Environmental Pollution Control Laboratory, Department of Chemistry, Aristotle University of Thessaloniki (AUTh). She is a member of the ENVIGREEN group of the Center for Interdisciplinary Research and Innovation (CIRI) of AUTh. Her main research interests are the development and application of novel sample preparation techniques coupled to advanced mass spectrometry approaches in the field of environmental chemistry, design and application of new materials in analytical and separation sciences, occurrence, transport, fate and effects of emerging contaminants (endocrine disruptors and pharmaceutical products, illicit drugs, polar pesticides, transformation products, nanomaterials and microplastics) in the environment (in waste and natural water), identification and structure elucidation of organic contaminants by high resolution mass spectrometry, application of “omics” techniques to environmental problems, wastewater-based epidemiology. She is also interested in the development of effective degradation and purification processes for the mineralization of organic micropollutants such as Advanced Oxidation Processes (AOPs). She has published more than 195 ISI papers (plus 2 books and 18 book chapters) that have received more than 9250 citations (Scopus, h index 53). She serves as Associate Editor for the journal Science of Total Environment (If 9.8) and as editor in the journals of Total Environment Advances and Current Opinion in Environmental Science & Health. She has been included in the list of World Top 2% Scientists for 2019-2022 which is compiled by the Stanford University (USA) based on standardized citation indicators.

 

 

Assoc. Prof. Dr. Petros Kokkinos

Assoc. Prof. Dr. Petros Kokkinos

 

Assoc. Prof. Dr. Petros Kokkinos is Molecular Biologist and Associate Professor at the School of Science and Technology of the Hellenic Open University (HOU). He has studied Biological Sciences at the University of Trieste, Italy, and holds a PhD from the Polytechnic School of the University of Patras, Greece. He has received nine (9) scholarships and has conducted research in UK, USA, Spain, and Switzerland. He is currently member of the Laboratory of Sustainable Waste Management Technologies (LSWMT Lab) and the Director of the Postgraduate Study Program ‘Cultivations under cover-Hydroponics’ of the HOU (since 2023). He has participated in more than 15 research projects, such as: 1) BioNFate (ARISTEIA I), “Fate and transport of biocolloids and nanoparticles in groundwater and effects of polluted water on public health”, 2) Archimedes III, “Wastewater Reuse – Development of a risk assessment model for public health protection”, 3) INVALOR research infrastructure (research infrastructure for waste valorization and sustainable management of resources), 4) Hybrid landfill leachate treatment model combining the use of advanced oxidation processes and membrane technology, 5) Resource oriented wastewater and sludge treatment in Greece and Germany. He has published 55 peer reviewed scientific papers (h-index: 21, Scopus, 05/01/2024, citations >1500), 44 publications in international conferences, 28 publications in Greek conferences, and a scientific book. He is Guest Editor of 2 Special Issues, invited reviewer in 16 scientific journals and Associate Editor in Environmental Water Quality (specialty section of Frontiers in Water). He has given 21 invited talks, and participated in 8 training seminars. He has organized 2 conferences, 2 symposiums, 8 summer schools, 2 seminars, and 5 workshops. He has supervised 35 postgraduate thesis. His research interests include Water Pollution, Wastewater Reuse, Biology of Wastewater Treatment, Environmental Virology, Risk Assessment and Public Health.

 

Prof. Dr. Ioannis K. Kalavrouziotis

Prof. Dr. Ioannis K. Kalavrouziotis

 

Prof. Dr. Ioannis K. Kalavrouziotis with PhD in Environmental Geochemistry from Department of Geology, University of Patras, Greece (1999) is currently a Professor and President of Hellenic Open University, and is Director of Education on Wastewater Management Master Programme, and Visiting Fellow in the University of Derby, UK (2015-2018). Guest Professor of Hubei University, China (09 May, 2019- 2022). He taught at the Department of Environmental and Natural Resources Management, University of Western Greece (2000-2013). He has completed administrative responsibilities as: Agronomist of the Greek Ministry of Agriculture (1988-2000), Director of Western Greece Region Administration (1993), Member of the Administrative Board of the National Agricultural Research Foundation (2006-2009), President of the Sector for the Management of Messologion Lagoon (2006-2009). He is a member of IWA and President of IWA Symposium on ‘Water, Wastewater, and Environment: Traditions and Culture’, 2014, Patras, Greece, a Chairman of IWA Specialist Group on Water and Wastewater in Ancient Civilizations. President of the Regional Council for Research and Innovation of the Western Greece Region (2020-2024). He has published 6 Books and chapters, 120 peer-reviewed full research papers in International Journals, 81 papers in International Conferences, 38 papers in National Conferences and more than 120 articles in journals and newspapers.

 

 

 

Dr. George Z. Kyzas

Dr. George Z. Kyzas

 

Dr. George Z. Kyzas is Chemist and Full Professor at the Department of Chemistry at the International Hellenic University (IHU). He is now working at the Department of Chemistry (International Hellenic University, Kavala, Greece), being the Head/President of the Department (since 2019). He is also the Head of Hephaestus Laboratory (since 2023) and the Director of the MSc in Cosmetic Chemistry (since 2021). His research interests include the synthesis and characterization of various (majorly adsorbent) materials (inorganic, aluminates, polymers, graphene, activated carbons, agro-food residues, nanomaterials, CNTs, etc.) for environmental applications (wastewater treatment). His scientific work has been published in more than 270 Papers in international journals, while he published 9 Books, 42 Chapters in scientific Books and holds 3 Patents. His work is widely recognized with 16,000 Citations (h-index 71). He is the Editor of the journal “Environmental Science and Pollution Research” (Springer, IF 5.8). His name is included in the list of Highly Cited Researchers for 2022 (Thomson Reuters – Clarivate WoS) [0.1% most impactful Scientists in the World]. Also, his name is included in the list of World Top 2% Scientists for 2019-2022 which is compiled by the Stanford University (USA) based on standardized citation indicators. He has also participated in about 25 research projects. He is a Reviewer in more than 200 scientific journals (RSC, ACS, Elsevier, Springer, Wiley, Taylor & Francis, etc) and participates as Chair of Expert Panelists and Assessor/Evaluator/Reviewer in National, European and International research proposals/calls/projects.

 

 

 

 


 

Application of molecularly imprinted polymers (MIPs) as environmental separation tools

Despina A. GkikaAthanasia K. Tolkou, Dimitra A. LambropoulouDimitrios N. Bikiaris, Petros KokkinosIoannis K. Kalavrouziotis and George Z. Kyzas

RSC Appl. Polym., 2024, Advance Article. DOI: 10.1039/D3LP00203A

Graphical abstract: Application of molecularly imprinted polymers (MIPs) as environmental separation tools

 

 


 

RSC Applied Polymers is a leading international journal for the application of polymers, including experimental and computational studies on both natural and synthetic systems. In this journal, you can discover cross-disciplinary scientific research that leverages polymeric materials in a range of applications. This includes high impact advances made possible with polymers across materials, biology, energy applications and beyond.

 

 

In picture: Fabrication of PANI/MWCNT supercapacitors based on a chitosan binder and aqueous electrolyte for enhanced energy storage

RSC Applied Polymers has published its first articles. To celebrate this, we invited the authors to showcase their work in some more detail.

 

A picture says more than a thousand words, so in this edition Brigitte Voit and co-workers present their recently published study entitled Fabrication of PANI/MWCNT supercapacitors based on a chitosan binder and aqueous electrolyte for enhanced energy storage in graphical form.

 

Fabrication of PANI/MWCNT supercapacitors based on a chitosan binder and aqueous electrolyte for enhanced energy storage

Ezgi Inci Yesilyurt, Jürgen Pionteck, Frank Simon and Brigitte Voit

RSC Appl. Polym. 2023, 1, 97-110, DOI: 10.1039/D3LP00061C

 

 

RSC Applied Polymers is a leading international journal for the application of polymers, including experimental and computational studies on both natural and synthetic systems. In this journal, you can discover cross-disciplinary scientific research that leverages polymeric materials in a range of applications. This includes high impact advances made possible with polymers across materials, biology, energy applications and beyond.

 

 

In picture: Experimental and computational studies on the effects of C(2) methylation on the properties and gas separation performance of polyimide-ionene membranes

RSC Applied Polymers has published its first articles. To celebrate this, we asked the authors to showcase their work in some more detail.

 

A picture says more than a thousand words, so in this edition Jason Bara and co-workers present their recently published study entitled Experimental and computational studies on the effects of C(2) methylation on the properties and gas separation performance of polyimide-ionene membranes.

 

Want to know more about their work? Read the full paper here!

Experimental and computational studies on the effects of C(2) methylation on the properties and gas separation performance of polyimide-ionene membranes

Grayson P. Dennis, Kathryn E. O’Harra, Xiaoyang Liu, Enrique M. Jackson, C. Heath Turner and Jason E. Bara

RSC Appl. Polym. 2023, 1, 111-122, DOI: 10.1039/D3LP00092C

 

 

RSC Applied Polymers is a leading international journal for the application of polymers, including experimental and computational studies on both natural and synthetic systems. In this journal, you can discover cross-disciplinary scientific research that leverages polymeric materials in a range of applications. This includes high impact advances made possible with polymers across materials, biology, energy applications and beyond.

 

Hear from our authors: Rubayn Goh and co-workers

RSC Applied Polymers has published its first articles. To celebrate this, we asked the authors to discuss their work in some more detail.

 

In this edition, we hear from Rubayn Goh and co-workers about their study entitled Recent advances in thermogels for the management of diabetic ocular complications.


From left to right: Jun Jie Chang, Rubayn Goh, Nicholas Wei Xun Ong, Belynn, Xian Jun Loh and Joey Hui Min Wong

 

“The prevalence of diabetic ocular complications is expected to increase significantly in the coming years. Minimally invasive injectable hydrogels can serve as ocular drug delivery systems, biocompatible vitreous substitutes, and shape-conformable implants. We hope this review will convince people of the potential thermoresponsive hydrogels (thermogels) can serve to improve therapeutics for ocular diseases.”

 

“This article highlights the key advantages of thermogels as an attractive system suitable for biomedical applications. Due to their ease of application, minimal invasiveness, in situ gelation at physiological temperatures, high biocompatibility, and tailorable properties, it makes it a suitable drug depot or scaffold for ocular therapeutics.”

 

“When fabricating thermogels as drug delivery depots, interactions between specific drugs and polymers would have a large impact on the release kinetics – this provides an opportunity for tunable injectable delivery systems. Ongoing work in fine-tuning and balancing opacity and drug interactions in thermogels will greatly benefit ocular drug delivery systems.”

 

“In light of the potential of thermogels for biomedical applications, we believe further research would help advance more thermogel systems into clinical applications.”

 

“We hope this review will inspire and provide valuable insights for the research community working on injectable hydrogels, drug delivery systems, and ocular disease treatments.”

 

Want to know more about their work? Read the full paper here!

 

Recent advances in thermogels for the management of diabetic ocular complications

Nicholas Wei Xun Ong, Belynn Sim, Jun Jie Chang, Joey Hui Min Wong, Xian Jun Loh and Rubayn Goh

RSC Appl. Polym. 2023, Advance Article, DOI: 10.1039/D3LP00136A

 

 

RSC Applied Polymers is a leading international journal for the application of polymers, including experimental and computational studies on both natural and synthetic systems. In this journal, you can discover cross-disciplinary scientific research that leverages polymeric materials in a range of applications. This includes high impact advances made possible with polymers across materials, biology, energy applications and beyond.

 

 

Hear from our authors: S. Anandhan

RSC Applied Polymers has published its first articles. To celebrate this, we asked the authors to discuss their work in some more detail.

 

In this edition, we hear from S. Anandhan about their study entitled A new multifunctional energy harvester based on mica nanosheet-dispersed PVDF nanofabrics featuring piezo-capacitive, piezoelectric and triboelectric effects.

 

Want to know more about their work? Read the full paper here!

A new multifunctional energy harvester based on mica nanosheet-dispersed PVDF nanofabrics featuring piezo-capacitive, piezoelectric and triboelectric effects

Govind S. Ekbote, Mohammed Khalifa, B. Venkatesa Perumal and S. Anandhan

RSC Appl. Polym. 2023, Advance Article, DOI: 10.1039/D3LP00080J

 

 

RSC Applied Polymers is a leading international journal for the application of polymers, including experimental and computational studies on both natural and synthetic systems. In this journal, you can discover cross-disciplinary scientific research that leverages polymeric materials in a range of applications. This includes high impact advances made possible with polymers across materials, biology, energy applications and beyond.

 

 

Hear from our authors: Ryan Zowada and Reza Foudazi

RSC Applied Polymers has published its first articles. To celebrate this, we asked the authors to discuss their work in some more detail.

 

In this edition, we hear from Ryan Zowada and Reza Foudazi about their study entitled Macroporous hydrogels for soil water retention in arid and semi-arid regions.

 

Want to know more about their work? Read the full paper here!

Macroporous hydrogels for soil water retention in arid and semi-arid regions

Ryan Zowada and Reza Foudazi

RSC Appl. Polym. 2023, Advance Article, DOI: 10.1039/D3LP00117B

 

 

RSC Applied Polymers is a leading international journal for the application of polymers, including experimental and computational studies on both natural and synthetic systems. In this journal, you can discover cross-disciplinary scientific research that leverages polymeric materials in a range of applications. This includes high impact advances made possible with polymers across materials, biology, energy applications and beyond.

 

 

Hear from our authors: Sophie Beilharz

RSC Applied Polymers has published its first articles. To celebrate this, we asked the authors to discuss their work in some more detail.

 

In this edition, we hear from Sophie Beilharz about their study entitled “Thermoresponsive polymers with LCST transition: synthesis, characterization, and their impact on biomedical frontiers” in graphical form.

 

 

Want to know more about their work? Read the full paper here!

Thermoresponsive polymers with LCST transition: synthesis, characterization, and their impact on biomedical frontiers

Yichun Yuan, Konpal Raheja, Nathalie B. Milbrandt, Sophia Beilharz, Steffy Tene, Solomon Oshabaheebwa, Umut A. Gurkan, Anna Cristina S. Samia and Metin Karayilan

RSC Appl. Polym. 2023, Advance Article, DOI: 10.1039/D3LP00114H

 

RSC Applied Polymers is a leading international journal for the application of polymers, including experimental and computational studies on both natural and synthetic systems. In this journal, you can discover cross-disciplinary scientific research that leverages polymeric materials in a range of applications. This includes high impact advances made possible with polymers across materials, biology, energy applications and beyond.

 

In picture: Recent progress in the development of conductive hydrogels and the application in 3D printed wearable sensors

RSC Applied Polymers has published its first articles. To celebrate this, we invited the authors to showcase their work in some more detail.

 

A picture says more than a thousand words, so in this edition Xin Wu and co-workers present their recently published review entitled Recent progress in the development of conductive hydrogels and the application in 3D printed wearable sensors in graphical form.

 

Recent progress in the development of conductive hydrogels and the application in 3D printed wearable sensors

Yuxuan Lin, Ruxue Yang and Xin Wu

RSC Appl. Polym. 2023, Advance Article, DOI: 10.1039/D3LP00077J

 

 

RSC Applied Polymers is a leading international journal for the application of polymers, including experimental and computational studies on both natural and synthetic systems. In this journal, you can discover cross-disciplinary scientific research that leverages polymeric materials in a range of applications. This includes high impact advances made possible with polymers across materials, biology, energy applications and beyond.