From Zero to Hero: achieving energy-positive municipal water supply

an article by webwriter Jesper Agrelius (@JesperAgrelius) at Linköping University, Sweden

In a Perspective article recently published in Environmental Science: Water Research & Technology, Englehardt et al. discuss a new vision for municipal water management: Net-zero water (NZW), a system which aims at neither importing nor exporting water from the service area – a way forward for local water independence.

Even though water availability is high in many regions, many people are still lacking access to energy-inexpensive, clean water. There are several stressors affecting water resources. Increasing demand for clean water can be attributed to several global and local processes operating on different scales and with varying impact, such as industrialization, rapid population growth, climate change and environmental degradation. We are facing a grand challenge: a resource-constrained world where we need to make water management more sustainable.

Net-zero water management – a new paradigm for water management

A NZW system is a management water and wastewater scheme that neither withdraws nor releases significant flows of water outside of its service area, ranging from a single residential lot to a large urban water district. NZW management proposes that high-demand and high-population areas, such as urban areas, no longer consume water needed by downstream regions, nor depend on upstream regions for supply.

One main motivation for net-zero municipal water management, besides prevention of water shortages, is that it aims to be energy-positive; this means that it should retain and save more hot-water thermal energy in the water than the energy used for treatment processes. Consequently, there is a demand to decrease the energy demands from water and disposal of wastewater containing hot water thermal energy.

NZW management can be operationalized in almost any modern catchment basin through the use of direct potable reuse (DPR). With this method, recycled water is introduced into the raw water supply directly upstream of a water treatment plant without passing through a reservoir or aquifer (environmental buffer) or introduced directly into a potable water supply distribution system. These systems show good economic capacities in producing potable water from municipal wastewater.

A schematic of a contemporary water management compared to the vision of a Net-Zero treatment process from a household perspective.

From buzzword to business: where do we go from here?

Net-zero water management is first and foremost a new vision, although it is becoming practical and technologically achievable to reuse water via a wide range of applications. Current implementations may not be easily reproduced in the near future, especially outside of research and demonstration settings. The authors conclude that there are several important targets and goals that we need to consider for reaching proper implementation of NZW; there is a demand for regulatory standards, policies and commercialized technologies to take the steps from vision to operation, and to a wider adoption of NZW systems.

Public acceptance is key for implementation of NZW systems

Governing structures and regulatory processes require time to develop, and regulatory infrastructure is crucial for the development of cost-effective commercial equipment, hence public acceptance and engagement in NZW is vital for proper implementation of NZW systems, as stated authors state.

Do you have ideas or visions on how to further develop Net-zero water management? Are there other important factors to consider that the authors did not discuss? Please share your opinions by commenting below after you have read the paper for free*:

Net-zero Water management: achieving energy-positive municipal water supply
J. Englehardt, T. Wu, F. Bloetscher, Y. Deng, P. Pisani, S. Eilert, S. Elmir, T. Guo, J. Jacangelo, M. LeChevallier, H. Leverenz, E. Mancha, E. Plater-Zyberk, B. Sheikh, E. Steinle-Darling and G. Tchobanoglous.
Env. Sci: Water Res. Technol. 2016, Advance Article
DOI: 0.1039/C5EW00204D

—————-

About the webwriter:

Jesper Agrelius is a MSc student in Environmental Science at Linköping University, Sweden. His main interests regards environmental science, especially climate change and biogeochemistry. You can follow him on Twitter @JesperAgrelius.

—————-

*Access is free through a registered RSC account.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Environmental Science: Water Research & Technology team select their top papers from 2015!

2015 has been a successful first year for Environmental Science: Water Research & Technology – we have published an array of high-impact research and review articles from both leaders and emerging scientists in the field of water research. The major highlights from 2015 have been captured by Editor-in-Chief Professor David Cwiertny in his recent Editorial.

As a celebration of a successful first year of publication, the Environmental Science: Water Research & Technology team have selected their top papers from 2015, listed below. Congratulations to all the authors featured! These papers free to access with an RSC Publishing account – we hope you enjoy reading them.

Triclosan, chlorinated triclosan derivatives, and hydroxylated polybrominated diphenyl ethers (OH-BDEs) in wastewater effluents
R. Noah Hensley, Jill F. Kerrigan, Hao Pang, Paul R. Erickson, Matthew Grandbois, Kristopher McNeill and William A. Arnold, Environ. Sci.: Water Res. Technol., 2015, 1, 316–325, DOI: 10.1039/C4EW00102H

Emerging investigators series: the source and fate of pandemic viruses in the urban water cycle
K. R. Wigginton, Y. Ye and R. M. Ellenberg, Environ. Sci.: Water Res. Technol., 2015, 1, 735–746, DOI: 10.1039/C5EW00125K

Modeling approaches to predict removal of trace organic compounds by ozone oxidation in potable reuse applications
Minkyu Park, Tarun Anumol and Shane A. Snyder, Environ. Sci.: Water Res. Technol., 2015, 1, 699–708, DOI: 10.1039/C5EW00120J

Some of our other highlights from 2015 include:

All content published in Environmental Science: Water Research & Technology in 2015 and 2016 is free to access with an RSC Publishing account – register for free here: http://pubs.rsc.org/en/account/register

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Using nanoparticle paper filters for inactivation of bacteria in contaminated waters

an article by webwriter Jesper Agrelius (@JesperAgrelius) at Linköping University, Sweden

There is a critical need for inexpensive point-of-use methods (POU) for purifying drinking water in developing countries to prevent waterborne pathogens.

Microbial contamination of water causes the spread of avoidable water-borne diseases, such as cholera, giardiasis, gastroenteritis and cryptosporidiosis, highlighted by WHO in their guidelines for drinking water quality. The potential health consequences of microbial contamination are important to consider and may never be compromised, from catchment to customer.

Figure 1. Examples of pathogenic microorganisms in contaminated surface water (left)
and the effect of nano-enabled (AG or CU NP) paper filters on the contaminated water (right).

Drinking water quality in Limpopo, South Africa

The last 20 years have showed an increase in drinking water quality for South Africa, where 95% of the population are considered to have access to potable drinking water as of 2012. However, a lot of rural residents still do not have reliable access to potable water and Limpopo, the study area in a recently published article, is the most rural province in South Africa. This region is highly affected by a lack of potable water and as a result the rates of diarrhoea cases are much higher than the national average.

Silver and copper – ‘noble’ in many ways

For the first time in the field, a study by Dankovich et al., published in Environmental Science: Water Research & Technology, demonstrates a novel and affordable technology for purifying drinking water. By using nano-enabled paper filters as a point-of-use method, the filters effectively inactivated coliform bacteria from contaminated water sources in Limpopo, South Africa.

The microbial water quality was improved by passing contaminated surface water from rural areas through nanoparticle paper filters which contained either AgNP (silver nanoparticles) or CuNP (copper nanoparticles). All of the AgNP and CuNP paper filters prominently reduced total coliform and E. Coli as compared to the untreated influent water, and E. coli bacteria were eliminated for the rural and urban medium samples.

Figure 2. Blotter papers (a) untreated, (b) with silver nanoparticles, and (c) with copper nanoparticles.
Note the scale: each paper is 6.5 cm by 6.5 cm and the filter cross section is 4.7 cm by 4.7 cm.

The problem of microbial contamination of water, turbidity and other pollutants from the natural sources studied in this specific research project are representative of many similar settings in the developing world and these filters show great promise as a water purifying option for resource-limited countries and regions.

The researchers raise important future directions for further development in the area are water purification by nano-enabled paper filters as a point-of-use method. Future research is needed to evaluate the design of practical and user-friendly filter holders, as well as address the practical challenges of implementing this paper filter technology in emergency/disaster relief settings and rural households.

Explore the exciting research regarding the nanoparticle paper filters in detail for free*:

Inactivation of bacteria from contaminated streams in Limpopo, South Africa by silver- or copper-nanoparticle paper filters
T. Dankovich, J. Levine, N. Potgieter, R. Dilingham and J. Smith
Environ. Sci.: Water Res. Technol., 2016, Advance Article
DOI: 10.1039/C5EW00188A



– Interested in more research regarding nano materials and the environment? Please visit our sister blog Environmental Science: Nano. Dr Marina Vance, webwriter in ES: Nano, explains how silver nanoparticles have antimicrobial “super powers”, and also highlights some environmental & health risks and opportunities of nanotechnology in the new Ted X Talk “The Good, the Bad, the Tiny”.

– Water quality is highlighted as one of several “Global Challenges” by the Royal Society of Chemistry. More resources on global, regional and local water quality are available here.

– The same researchers made a small Internet success last year with the viral spread of a project from the Water is Life organization, highlighted by magazines such as Wired, Slate and Smithsonian.




About the webwriter

Jesper Agrelius is a MSc student in Environmental Science at Linköping University, Sweden. His main interests regards environmental science, especially climate change and biogeochemistry. You can follow him on Twitter @JesperAgrelius.

—————-

*Access is free through a registered RSC account.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Leaving no one behind: Developing tools for faecal sludge management

an article by webwriter Jesper Agrelius (@JesperAgrelius) at Linköping University, Sweden

Humanity faces a grand challenge – sanitation. Worldwide lack of access to basic sanitation is a widely recognized problem for human health, development, the economy and our environment.

Globally 2.4 billion people live without access to improved sanitation and the issue of sanitation lies at the root of many other challenges related to human development, such as education, public health and environmental degradation, and significantly alter economic growth.

Meeting the global sanitation challenge

Faecal Sludge Management (FSM) involves the mechanical or manual emptying of faecal sludge from onsite sanitation systems, and transportation of waste to the treatment facilities using road-based equipment. There are several combinations of transportation technologies and fixed infrastructure that can be used within FSM service delivery.

FSM is often highlighted as an affordable, sustainable and viable technical solution for safe and proper management of faecal sludge, and over the years it has been praised in the literature emphasizing the its potential for meeting the global sanitation challenge. However, there are several limitations related to data, tools and practical examples to support decision makers in the implementation of FSM services.

Ruth Kennedy-Walker and colleagues presented new research recently published in Environmental Science: Water Research & Technology discussing faecal sludge management options for two informal settlements in Lusaka, The Republic of Zambia.

Informal settlements important in sanitation management

Over 60% of the inhabitants in Lusaka live in informal settlements, meaning that sanitation provision via conventional sewerage, onsite septic tanks or formalized FSM services are available only to mid- and high-income residents inhabiting the planned areas of the city. Low income areas have little or no sanitation provision, and large sectors of the city have inadequate infrastructure for meeting the sanitation needs of the population.

Figure 1. Map of Lusaka, capital of The Republic of Zambia. The case study areas, the informal settlements Chazanga and Kanyama, are highlighted with a thick silhouette. The map also shows the existing sewerage network and the community boundaries. Only 9 of the 21 informal settlements in Lusaka are provisioned by the formal sewerage network (Image: Kennedy-Walker et al., 2015).

Evaluating the long-term costs and tools for optimization

This new study addresses some of the issues in sector limitations by presenting a long-term costing methodology for two of the informal settlements in Lusaka. The methodology compares the costs related to a number of feasible fixed infrastructure and transportation scenarios over a 25 year period. The spatio-topological tool developed by the researchers in their analysis was used to model proposed FSM networks – allowing the path of least-time transportation to be identified.

This was used for calculating the net present value and average incremental cost for seven different FSM scenarios over a 25 year design life. The research demonstrated that FSM can be considered an affordable solution for providing sanitation services to the poorest communities of Lusaka. This is valuable information for planners in Lusaka as a decision-support tool, but also very beneficial to the entire sanitation sector.

Clean water and sanitation fundamental for Sustainable Development

Figure 2. The sixth Sustainable Development Goal of total 17: Availability and sustainable management of water and sanitation (Image from UN.org).

Since 2010, the United Nations General Assembly recognized the human right to water and sanitation, acknowledging that sanitation and clean drinking water are crucial to the realization of all human rights (Resolution A/RES/64/292).

Ensuring availability and sustainable management of water and sanitation for all is one of the recently adopted Sustainable Development Goals (SDG). The SDG have certain targets to achieve by 2030, for instance:

  • Equitable and universal access to safe and affordable drinking water for all.
  • Access to adequate and equitable sanitation and hygiene, with a special attention to the needs of girls, women and those in vulnerable situations.
  • Improvement of water quality by reducing pollution, eliminating dumping and minimizing release of hazardous chemicals and materials, halving the proportion of untreated wastewater and substantially increasing recycling and safe reuse globally.

By developing tools that are applicable to the sanitation community in general, the study from Kennedy-Walker and colleagues provides important knowledge and methods for communities and societies that are in need of proper sludge management, especially for those in vulnerable situations such as informal settlements. This can be seen as one of the many steps required to achieve our goal of proper sanitation for all.


Read this exciting research for free* by clicking the link below:

Optimisation and costing of faecal sludge management options for Lusakas’ informal settlements
R. Kennedy-Walker, T. Holderness, D. Aldersson, J. M. Amezaga and C. A. Paterson
Env. Sci: Water res. Technol
. 2016, Advance Article.
DOI: 10.1039/C5EW00179J

—————-

About the webwriter

Jesper Agrelius is a MSc student in Environmental Science at Linköping University, Sweden. His main interests regards environmental science, especially climate change and biogeochemistry. You can follow him on Twitter @JesperAgrelius.

—————-

*Access is free through a registered RSC account.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Environmental Science: Water Research & Technology Most Accessed Articles 2015

These are the top 10 most downloaded articles published in Environmental Science: Water Research & Technology in 2015. Congratulations to all of the authors whose articles have been featured!

Microbial capacitive desalination for integrated organic matter and salt removal and energy production from unconventional natural gas produced water
Casey Forrestal, Zachary Stoll, Pei Xu and Zhiyong Jason Ren
Environ. Sci.: Water Res. Technol.
, 2015,1, 47-55
DOI: 10.1039/C4EW00050A

Bioelectrochemical systems for nitrogen removal and recovery from wastewater
M. Rodríguez Arredondo, P. Kuntke, A. W. Jeremiasse, T. H. J. A. Sleutels, C. J. N. Buisman and A. ter Heijne
Environ. Sci.: Water Res. Technol., 2015,1, 22-33
DOI: 10.1039/C4EW00066H

Pitfalls and progress: a perspective on achieving sustainable sanitation for all
Michael R. Templeton
Environ. Sci.: Water Res. Technol., 2015,1, 17-21
DOI: 10.1039/C4EW00087K

Reduction of microbial contamination from drinking water using an iron oxide nanoparticle-impregnated ultrafiltration mixed matrix membrane: preparation, characterization and antimicrobial properties
Munmun Mukherjee and Sirshendu De
Environ. Sci.: Water Res. Technol.
, 2015,1, 204-217
DOI: 10.1039/C4EW00094C

Anaerobic membrane bioreactor treatment of domestic wastewater at psychrophilic temperatures ranging from 15 °C to 3 °C
A. L. Smith, S. J. Skerlos and L. Raskin
Environ. Sci.: Water Res. Technol.
, 2015,1, 56-64
DOI: 10.1039/C4EW00070F

The water energy food nexus – challenges and emerging solutions
John Machell, Kevin Prior, Richard Allan and John M. Andresen
Environ. Sci.: Water Res. Technol., 2015,1, 15-16
DOI: 10.1039/C4EW90001D

Detection of trace arsenic in drinking water: challenges and opportunities for microfluidics
Nevetha Yogarajah and Scott S. H. Tsai
Environ. Sci.: Water Res. Technol., 2015,1, 426-447
DOI: 10.1039/C5EW00099H

Graphene in the Fe3O4 nano-composite switching the negative influence of humic acid coating into an enhancing effect in the removal of arsenic from water
Blain Paul, Vyom Parashar and Ajay Mishra
Environ. Sci.: Water Res. Technol., 2015,1, 77-83
DOI: 10.1039/C4EW00034J

Selective adsorption of oil–water mixtures using polydimethylsiloxane (PDMS)–graphene sponges
Diana N. H. Tran, Shervin Kabiri, Ting Rui Sim and Dusan Losic
Environ. Sci.: Water Res. Technol., 2015,1, 298-305
DOI: 10.1039/C5EW00035A

Adsorptive removal of arsenic from groundwater using a novel high flux polyacrylonitrile (PAN)–laterite mixed matrix ultrafiltration membrane
Somak Chatterjee and Sirshendu De
Environ. Sci.: Water Res. Technol.
, 2015,1, 227-243
DOI: 10.1039/C4EW00075G




Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Emerging Investigators Series author: Patrick McNamara

Patrick McNamaraPatrick McNamara is in his third year as an Assistant Professor in the Department of Civil, Construction & Environmental Engineering at Marquette University. His research group focuses on the removal of micropollutants from water, wastewater, and biosolids, and on the interactions between microbial communities and micropollutants with a special emphasis on antibiotic resistance. He earned his PhD in 2012 from the University of Minnesota under the guidance of Paige Novak and his MS in 2008 from the University of Texas at Austin with Des Lawler.

Read Patrick’s Emerging Investigators article ‘Pyrolysis removes common microconstituents triclocarban, triclosan, and nonylphenol from biosolids’ here.



How has your research evolved from your first to your most recent article?
My first work was on the dewaterability of wastewater biosolids. I worked for a physical-chemical treatment expert while earning my master’s, but was drawn to the biological aspects of anaerobic digestion. I grew interested in the interactions between micropollutants and anaerobic treatment processes. My research group now focuses on the impacts of micropollutants in biological systems and investigates ways to remove micropollutants. This most recent article looked at a process to remove micropollutants from biosolids.

– What aspect of your work are you most excited about at the moment?
I am very enthusiastic about our work on consumer product antimicrobials and antibiotic resistance. We have made some interesting findings at Marquette in this area and it will be a fun journey to continue to dive deeper. I am thrilled about a new postdoctoral scholar joining us in January to work in this area, and I am looking to have a PhD student join us in this area as well.

– What was your biggest challenge during this research?
John Ross was my first graduate student. He walked into a lab without established procedures or even an LC-MS at the time. It was a big, but fun challenge to get everything started. John took a risk working for a starting Assistant Professor, but we had a great experience learning from each other. The biggest lab challenge was keeping the reactor system air-tight after multiple experiments.

– How did you find out about Environmental Science: Water Research & Technology?
From David Cwiertny on Twitter! ES:WR&T does a great job getting its name out there on social media, and then the name spreads quickly between colleagues in the field because they put together a great editorial team.

– What are your views on the Environmental Science journals of the Royal Society of Chemistry?
This is my first experience publishing in an Environmental Science journal from the Royal Society of Chemistry. It was terrific. The process was so smooth and clear. The turn-around time was almost unbelievable. They are publishing on a lot of hot topics.

– In which upcoming conferences or events may our readers meet you?
I plan to attend this summer’s Gordon conference on Environmental Sciences: Water. I was also invited to talk at ASM Microbe 2016 that will be held in Boston in June.

– How do you spend your spare time?
I enjoy walks with my wife, going to Marquette Basketball games, fishing, playing piano, traveling, and having coffee or a beer with friends.

– If you could not be a scientist, but could be anything else, what would you be?
Well, with no restrictions I would be a professional soccer player or piano player in a band. But honestly, I cannot believe I get to do this job, I love it.

– Can you share one piece of career-related advice or wisdom with other early career scientists?
Find a mentor, and take advice from people in your field that you respect both scientifically and personally. Don’t be seduced by the people who talk about how they are always working; they might just have poor time management. This is the best job in the world. Do your job well, and take breaks at the end of the day and on weekends. It’s a marathon, but it can be very fun and rewarding. Lastly, learn to delegate and trust others after you have taught them. It is hard to be successful if you need to do everything on your own. Teamwork is very valuable.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Improving oil retrieval methods

an article by webwriter Jesper Agrelius (@JesperAgrelius) at Linköping University, Sweden

Environmental impacts of oil spills

Accidental oil spills are unavoidable during the acquisition, processing and distribution of petroleum products. Oil can pollute the oceans through a range of processes, such as land run off, tanker discharges and vessel accidents. Oil spills impact humans, plants and wildlife, including fish, mammals and birds.

In many cases, the environmental recovery after an oil spill is fairly swift and complete within ten years; however, some long-term environmental effects can be measured decades after a large oil spill.

Oil slick in the Gulf of Mexico, April 29th 2010 (Image from NASA Goddard Space Flight Center)

Oil spill remediation techniques

Remediation techniques to manage oil spills are often both expensive and lengthy. Conventional clean-up techniques after oil spills range from in situ burning; mechanical methods, such as booms, vacuums and skimming; chemical dispersants; and/or the use of sorbent materials. Each of these methods presents its own advantages and disadvantages depending on the scenario of the oil spill.

One of the most versatile, cost effective and fruitful methods is to use porous sorbent materials to remove oil from the water surface. We can find natural oil sorbents such as wood, cotton, milkweed, and wool, among others. The efficiency of the sorbent material is related to its hydrophobicity, porosity, sorption capacity and rate, and reusability.

Each oil remediation technique comes with its own environmental impact. Many novel synthetic oil sorbents are currently being developed and there is great need for biodegradable and reusable absorbents to manage oil spills – and to minimize the environmental effect of the oil remediation technique.

New methods to separate oil and water: biodegradable synthetic oil sorbent

A study from Boston University recently published in Environmental Science: Water Research & Technology presents knowledge on biodegradable synthetic oil sorbents, allowing for efficient recovery after accidental oil spills.

Electrospun non-woven poly(ε-carporlactone) PCL microfiber meshes are mechanically robust, reusable and biodegradable polymeric oil sorbents capable of  retrieving oil from oil spills in both freshwater and seawater.

Schematic diagram of an electrospun hydrophobic PCL mesh that selectively removes oil from a water-in-oil emulsion.

By simulating oil spills in fresh- and seawater scenarios, researchers examined how well the polymeric oil sorbent could retrieve oil. The PCL is hydrophobic and has >99.5% (oil over water) oil selectivity and has oil absorption capacities of approx. 10 grams of oil/gram of sorbent material. Both the absorption capacity and the oil selectivity remained constant over several oil absorption and vacuum assisted retrieval cycles when removing crude oil or mechanical pump oil.

This study shows the need for biodegradable synthetic oil sorbents which balance porosity and mechanical integrity enabling reuse, and allowing for efficient recovery of oil after an oil spill.


Interested in this research? You can read the full paper for free* using the link below:

Poly(ε-caprolactone) microfiber meshes for repeated oil retrieval
J.S Hersey, S.T Yohe and M. W. Grinstaff
Env. Sci: Water Res. Technol. 2015, 1, 779-786
DOI: 10.1039/C5EW00107B

—————-

About the webwriter

Jesper Agrelius is a MSc student in Environmental Science at Linköping University, Sweden. His main interests regards environmental science, especially climate change and biogeochemistry. You can follow him on Twitter @JesperAgrelius.

—————-

*Access is free through a registered RSC account – click here to register

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

International Water Reuse and Desalination Symposium

Potable Reuse of Water themed collection

A two-day International Water Reuse & Desalination Symposium focused on climate resilient water solutions was held in Brisbane, Australia on the 4th and 5th of November.

This specialty conference was focused on practical aspects of water reuse and desalination, as well as relevant research being conducted in the US and Australia, and featured a blue ribbon assemblage of world-class experts on these two vital components of the water supply equation.

The picture shows Stuart Khan (on the right) presenting the Potable Reuse of Water collection

Editorial Board member and Associate Editor Stuart Khan attended this meeting and took this opportunity to present the Potable Reuse of Water collection included in issue 5 of Environmental Science: Water Research & Technology.

“The delegates understood and appreciated that the focus of our journal is specifically targeted toward engineered systems. That focus makes it considerably more specialised than most of the other water research journals in the field.”

Stuart Khan, Associate Editor

The symposium was a success and the themed collection was very well received. Dedicated to recent advances associated with the potable reuse of water, issue 5 includes a comprehensive collection of papers highlighting research technology and engineering development at the leading edge of potable water reuse.

“There was a lot of interest from the conference participants in our journal. A number of them were authors of the papers presented in this potable reuse of water issue, and others had already submitted papers to our regular issues. The fact that the themed issue was so precisely targeted to one of the key conference themes was particularly appreciated, and all complimentary copies were eagerly snapped up,” Stuart added.

The issue to combine a variety of topics relevant to potable reuse of water. This includes but is not limited to technical innovations, human health risk assessments, monitoring strategies, sustainability assessments and novel applications.

Why not read the full collection now?

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Saving water increases health risks in green buildings

a Chemistry World article by Polly-Anna Ashford

US researchers have found that strategies for conserving water in green buildings can lead to higher levels of bacteria in the plumbing systems, with potentially serious implications for public health.

William Rhoads and colleagues at Virginia Tech conducted a survey of the drinking water quality in different types of green building, from an office to a net-zero energy home. They measured the chlorine levels, temperature and microbial content, including the prevalence of Legionella bacteria, the cause of Legionnaires’ disease. […]

Read the full article in Chemistry World!



Read the original research paper in Environmental Science: Water Research & Technology for free:

Survey of green building water systems reveals elevated water age and water quality concerns
William J. Rhoads, Amy Pruden and Marc A. Edwards
Environ. Sci.: Water Res. Technol.
, 2015, Advance Article
DOI:
10.1039/C5EW00221D, Paper


*Access is free through a registered RSC account
Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Chlorinated compounds form in tea and coffee

an Environmental Science: Water Research & Technology article highlighted in Chemistry World by Philippa Matthews

Tea and coffee are the most consumed beverages in the world, but a new study has discovered some unexpected chemistry occurring in our cups.

Contrary to popular belief, boiling the water only removes around 20% of chlorine © Shutterstock

Chlorine is added to water as part of the disinfection process, with a residual amount remaining in the treated water to supress microbial growth. This chlorine reacts with organic molecules in the water to produce chlorinated chemicals known as disinfection byproducts (DBPs), such as chloroform.

Nikolai Kuhnert from Jacobs University, Germany, conducts research on compounds in tea and coffee. He advocates further research into the effects processing has on our food. ‘It illustrates further how little we know on the chemistry of food processing that significantly alters the chemical composition of our daily diet, producing both novel compounds with adverse or beneficial properties for human health.’



Read the full article in Chemistry World!

Read the original research paper in Environmental Science: Water Research & Technology:
Emerging investigators series: formation of disinfection byproducts during the preparation of tea and coffee

Tom Bond, Seeheen C. Tang, Nigel Graham and Michael R. Templeton
Environ. Sci.: Water Res. Technol.
, 2016, Advance Article
DOI:
10.1039/C5EW00222B

*Access is free through a registered RSC account

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)