Author Archive

Nature leads the way: A Biomimetic Tricopper complex as a catalyst for selective oxidation of smaller alkanes

2014 has arrived and with it a new batches of Hot Articles, one of which from January deserves special attention. Professor Sunny Chan‘s group at Academia Sinica,  Taiwan have achieved the distinction of being the first group to devise a molecular catalyst for the selective oxidation of methane to methanol. This reaction faces a formidable challenge in the form of inertness of the methane C–H bond which makes O-atom insertion into the molecule almost impossible in ambient conditions.  Even if this problem is solved, the product, methanol, is highly susceptible to over-oxidation leading to formation of other undesired products. For of these reasons, most of the researchers have failed to scale this gargantuan mountain of difficulties.

Time and again when scientists have found it difficult to get answers to tough and challenging problems they have turned to nature for inspiration. In this case, the solution lay in a particular class of enzymes called methane monoxygenases (MMO) found in the methanotrophic bacteria. These MMOs have metallic clusters at their centres, which catalyse this difficult reaction with ease. In order to emulate these catalytic centres, the researchers developed some biomimetic models containing tricopper clusters, one of which, [CuICuICuI(7-N-Etppz)][ClO4], successfully mediated the selective oxidation of methane without any over-oxidation. This tricopper complex, when activated by dioxygen (O2), harnesses a “singlet oxene”, the strongest oxidant that could be used for a facile O-atom insertion across the C-H bond.

Biomimetic Tricopper complex as a catalyst for selective oxidation of methane to methanol

The catalyst also gave selectivity in the cases of ethane and propane, but not with higher alkanes. The reason being is the design of the tricopper catalyst, which has a small hydrophobic binding pocket at the base and forms a transient complex with the alkane and carries out the oxene transfer to oxidize the substrate. This pocket is not big enough to accommodate the product methanol (as well as the other small alcohols), so it releases the product as soon as it is formed. This removes over-oxidation from the equation, giving profound selectivity in cases of smaller alkanes. The authors have further studied the catalytic cycles and analysed the factors affecting the catalytic turnovers and efficiency.

This work presents a move towards a more efficient flow system which, in the future, would help in increasing the yields of the products. One issue with the current system is the solubility of the catalyst in solvents which can dissolve CH4 gas which may be put to rest by some modification in the design of the catalyst, leaving brighter prospects for the future.

To find out more about this nature-inspired discovery, read the full article now for more details.

Developing an efficient catalyst for controlled oxidation of small alkanes under ambient conditions
Penumaka Nagababu, Steve S.-F. Yu, Suman Maji, Ravirala Ramu and Sunney I. Chan
Catal. Sci. Technol., 2014, DOI: 10.1039/C3CY00884C


Shreesha Bhat, Web Writer Shreesha Bhat is a M.S.(Pharm.) in Medicinal Chemistry from National Institute  of  Pharmaceutical Education and Research,  India. He has recently joined the research group of  Dr. Pallavi Sharma as a PhD student at the  University of Lincoln, UK. His project involves  the design and synthesis of Helicase-primase inhibitors for Herpes Simplex virus and development of useful synthetic methodologies.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Doubts put to rest: On a Quest for the real intermediates in Iron based Water Oxidation at low pH

It gives an absolute delight to the grey matter to imagine power generated from simple tap water. Power which could be supplied to our home and cars and thus put an end to the incessant use of fossil fuels. Yes friends, after the Bronze and Iron age, now it’s time for the Hydrogen age. The term “Hydrogen Economy” is gaining momentum and has the potential to do for the energy revolution what the computer and the Internet have done for the information revolution.

Among the various methods available for hydrogen production, water-splitting is one of the most promising approaches. Earlier, water oxidation catalysis have been performed efficiently with expensive, toxic and earth-scarce transition metals, but 3d metal-based catalysts are much less established. Fillol and Costas in their Nature Chemistry paper explored the use of environmentally benign and easily available iron coordination complexes for water oxidation with evident success. Their observation suggested that the iron complexes, when combined with Ce(IV) gets decomposed to iron oxides, which are, in fact, the main active catalysts for the water oxidation.

Substantial work by Tai-Chu Lau and group indicated that the actual catalysts for water oxidation are different at low and high pH values. It has been confirmed through various studies that at high pH, Fe2O3 is indeed the active metal catalyst, but researchers are still mystified as to what would be the intermediate at low pH. It has been speculated that the water oxidation at low pH goes through a molecular oxo-Fe active intermediate, as no evidence for Fe oxide formation has been obtained till date. The reason for this was given by Fillol and Costas, who proved that Fe (III) does not oxidize water in acidic conditions nor does it convert to Fe oxide. Another possibility that has been looming in the minds of the scientists is that FeO42- ions being strong oxidants can oxidize water in acidic conditions. But, scientists have shown that Ce(IV) is not capable of oxidizing Fe(III) to  FeO42. So, It has been a matter of debate as to which is the real catalyst for low pH water oxidation: Is it FeO42- indeed? Or an oxo-Fe intermediate?

Water oxidation by iron complexes in presence of Ce(IV)

In this communication, a group of Iranian scientists have tried to answer this question and included it in their quest for a more effective iron-based water oxidation catalyst. Their work has substantial basis in the work done by Fillol and Costas whose one observation was the inability of Fe(III) oxohydroxo 2µ-(O,OH) diferric dimer to catalyze water oxidation. So, a question was posed by Mohammad Mahdi Najafpour and group if an Fe(III) complex with only one bridge (oxo {O} or hydroxo {OH}) can be a water oxidizing catalyst? And if FeO42- has any role in the whole process?

To answer the above two important questions, they synthesized an Fe(III) oxo diferric dimer with tris(2-pyridylmethyl)amine (tpa) ligand with only one µ-O bridge, and tested the dimer for water oxidation in presence of  Ce(IV), and found it to be 6 times more active (measured in terms of TOF)  than the monomer reported by Fillol, Costas and workers. This provided a new insight into the mechanism, suggesting that a monomer might be just a precursor to the active catalyst which might be a di- or a multinuclear iron compound. The experiments prove that even if Fe ions convert to FeO42- in the presence Ce(IV), FeO42- cannot oxidize water catalytically, thus putting an end to the long lasting debate of FeO42- being an intermediate in these reactions.

Read more at:

A dinuclear iron complex with a single oxo bridge as an efficient water-oxidizing catalyst in the presence of cerium (IV) ammonium nitrate: New findings and current controversies
Mohammad Mahdi Najafpour, Atefeh Nemati Moghaddam, Davood Jafarian Sedigh and Malgorzata Holynska
Catal. Sci. Technol.,2013, Accepted Manuscript
DOI:
10.1039/C3CY00644A


Shreesha Bhat, Web Writer Shreesha Bhat is a M.S.(Pharm.) in Medicinal Chemistry from National Institute  of  Pharmaceutical Education and Research,  India. He has recently joined the research group of Dr. Pallavi Sharma as a PhD student at the  University of Lincoln, UK. His area of interests  include  chemical  synthesis of biologically important molecules  and developing newer methods for organic synthesis using novel catalysts.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Chemical Cross-linking of lipase in Mesoporous silica: A new addition to the enzyme immobilization kit

themed issue on Enzyme Immobilization was recently published in Chemical Society Reviews encompassing the advances made in the field of enzyme immobilization and its importance in the Industrial arena. The credit goes to a simple discovery by Nelson and Griffin, who in 1916 rediscovered that artificial carrier-bound invertase on Al(OH)3 and charcoal was still catalytically active. They put to rest the claims that substances like charcoal caused inhibition of the enzymes (due to adsorption) and established that adsorption had no role in the decreased activity of the enzymes. This discovery laid the foundation for the immobilized enzymes to find wide applications in the chemical industry.

The carriers used for immobilization include natural and synthetic polymers like cellulose, starch,  polystyrene, sephadex and inorganic carriers like clay, kaolinite, silica gel etc. Of these, Mesoporous silica materials (MPS) have been found to be an attractive alternative due to their intrinsic properties. The immobilization of the enzymes on these carriers are generally carried out by physical adsorption or covalent binding, but face the problem of enzyme leaching. In order to overcome this problem, the Cross-linked enzyme aggregates (CLEAs) method has emerged of late and has been successful to a certain extent. In the present paper, the authors have explored the CLEAs of lipase from Candida sp. 99-125 immobilized in MPS and found them to be thermally and catalytically stable with  improved enzymatic activities.

As a measure of their improved properties, the activity and stability of the Cross-linked lipases in MPS (nicknamed CLL@MPA) were compared with the simple adsorbed lipases (ADL@MPA) and the native enzymes, and were found to be highly stable (at high temperatures as well as on shaking) with improved hydrolytic, esterification and transesterification activites. Although these lipases (from candida sp. 99-125) were less active than the commercially available Novzyme 435 (from candida antarctica), their cheaper costs make them a promising alternative for industrial applications.

This study thus paves the way for cheaper and effective enzyme immobilization options, which can be further extended to other enzymes and lead to potential advances in various enzyme-based industrial processes.

Lipase Candida sp. 99-125 CLEAs in MPS

Lipase CLEAs in mesoporous silica- a robust biocatalyst with increased stability and recyclability

Read more at:

Formation of lipase Candida sp. 99-125 CLEAs in mesoporous silica: characterization and catalytic properties
Jing Gao
,   Lianlian Shi,   Yanjun Jiang,   Liya Zhou and   Ying He
Catal. Sci. Technol.
, 2013, Accepted Manuscript
DOI:
10.1039/C3CY00412K


Shreesha Bhat, Web Writer Shreesha Bhat is a M.S.(Pharm.) in Medicinal Chemistry from National Institute  of  Pharmaceutical  Education and Research,  India. His area of interests  include  chemical  synthesis of biologically important  molecules  and developing  newer    methods for organic  synthesis using novel catalysts.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Spinel Cobalt catalysts: Potential solution to reduce tailpipe emissions in LPG

Watching an automobile expert converting a gasoline engine to a LPG engine (using conversion kits) may leave the witness in awe of the technological advances which man has achieved ever since the invention of the wheel. But, this Jugaad comes with its own set of problems and issues which may not leave the environmentalists in the right frame of mind. Pollution has been raising concerns ever since the inception of automobiles (particularly two and three wheelers) and has been a serious concern in both developed as well as developing nations like India and China. To curb the menace of pollution, LPG has been considered an attractive alternative in terms of  low CO2 production, lower emission of other greenhouse gases, cheaper cost and more efficient fuel usage.

However, the use of conversion kits almost kills the purpose of  LPG as it results in emission of high concentrations of light hydrocarbons  (HCs) along with other pollutants such as CO and NOx, as LPG must be run on custom-made engines rather then gasoline engines. The HCs and CO can be oxidized to H2O and CO2 in presence of oxygen, but due to reduced availability of oxygen in LPG engines, the demand of oxidation catalysts has risen in order to facilitate the conversion of HCs into CO2 and H2O. Three-way catalysts (TWC) which include the platinum group metals, fail to oxidize HCs at low temperatures (between 200 to 300 °C), resulting in the maximum emissions of HCs after a cold-start. (Engines started when they are cold generally have initial temperatures around this range)

To come up with a low-temperature catalyst, researchers from Indian Institute of  Technology (IIT-BHU) tried their hands with cobaltite spinel oxidation catalysts (MCo2O4) and had immediate success with their experiments. They studied different metal cobaltites (M = Zn, Ni, Cu) and found Ni cobaltite to exhibit the best performance for oxidation of LPG at low temperatures, with the effectiveness of the catalysts following the order: NiCo2O4 > CuCo2O4 > ZnCo2O4.

Due to the synergistic effect of simultaneous oxidation of LPG and CO, total LPG oxidation was found to occur at 185 °C, which is 10°C less than that for oxidation of LPG alone. Thus, the researchers were able to devise a new spinel catalyst which catalyse the oxidation of HCs and CO at low temperatures and were able to solve the problem of  cold-start of LPG fuelled vehicles to some extent.

Low Temperature Complete Combustion of Lean Mixture of LPG Emissions over Cobaltite Catalysts

Read more about the preparation and characterization of spinel cobaltite catalysts from the article:

Low Temperature Complete Combustion of Lean Mixture of LPG Emissions over Cobaltite Catalysts
Ram Prasad, Sony Chaddha and Pratichi Singh
Catal. Sci. Technol., 2013, Accepted Manuscript
DOI: 10.1039/C3CY00537B


Shreesha Bhat, Web Writer Shreesha Bhat is a M.S.(Pharm.) in Medicinal Chemistry from National Institute  of  Pharmaceutical  Education and Research,  India. His area of interests  include chemical  synthesis of biologically important  molecules  and developing  newer methods for organic  synthesis using novel catalysts.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Art in action: Novel Sulfated Zirconia as bifunctional catalysts

With context to the ever increasing problem of dwindling energy resources, sugars like 5-Hydroxymethylfurfural (5-HMF) and furfural are considered to be the key for next-generation energy demands. These sugars have been recently identified to have potential applications in the petrochemicals and plastic industry. While efforts are ongoing to find a cheaper and greener way for the production of 5-HMF, it has eluded most of the researchers till now.

In their quest for a total green 5-HMF synthesis, the authors moved towards sulfated zirconia as a bifunctional catalyst for the one-pot conversion of glucose to 5-HMF in aqueous phase. It has been observed that isomerisation of glucose to fructose is possible with zirconia, and the subsequent dehydration of fructose to 5-HMF with sulfated zirconia (SZ). The authors tried to capitalize on their previous experience of employing SZ in aqueous media and went on to create the first ever bifunctional catalyst for 5-HMF production in water. The key towards the holy grail was tuning the acid strength in SO2/ZrO2 to achieve both the isomerisation and dehydration through a single bi-functional catalyst.

Sulfated Zirconia as bifunctional catalysts

The amphoteric nature of  zirconia was explored and tuned by adjusting the sulfate loading onto the metal, as the surface sulfate density directly relates to the acidity of the catalyst. The extensive investigations by the researchers showed that zirconia exists in a monoclinic state with large lewis base sites, which converts to a more stable tetragonal structure on sulfate addition with abundance of bronsted acid sites. The lewis base sites catalysed the glucose –> fructose isomerisation and the bronsted acid sites accelerated the fructose –> 5-HMF dehydration. This knowledge helped them in optimising the sulfate loading to 0.3 ml which gives a perfect platform for Glucose –> Fructose –> 5-HMF conversion.

To read more about the art of synthesizing such novel bifunctional catalysts, follow the link below:

Bifunctional SO4/ZrO2 catalysts for 5-hydroxymethylfurfural (5-HMF) production from glucose

Catal. Sci. Technol., 2013, Accepted Manuscript
Shreesha Bhat, Web Writer Shreesha Bhat is a M.S.(Pharm.) in Medicinal Chemistry from National Institute  of Pharmaceutical        Education and Research, India. His area of interests  include chemical synthesis of biologically important  molecules and developing  newer methods for organic synthesis using novel catalysts.
Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Pd Nanocubes: A new customizable weapon for enantioselective hydrogenation

Ever heard of a customizable catalyst? A catalyst with a unique shape? A catalyst which with a change in size can provide different activity? If not, then here is a catalyst- an easy to prepare Pd nanocube which you can customize as per the activity desired: racemic or enantioselective hydrogenation of α,β-unsaturated carboxylic acids.

The enantioselective hydrogenation of aliphatic α,β-unsaturated carboxylic acids faces the obstacle of lower enantioselectivities as the aliphatic substituent is not armed to curb the inevitable isomerization of the double bonds in the structure. High enantioselectivities have been observed in cases of aryl substituted α,β-unsaturated carboxylic acids owing to the stabilizing effect of the aryl substituent at the β-position. With no effective solutions up-to-date, the researchers at Chinese Academy of Sciences tried to find the answer to this problem in the world of micromeretics and morphology.

Considering the previous instances where the sizes and shape of the catalysts did play a role in the enantioselectivity, the researchers tried to capitalize on this and were indeed rewarded with fruitful results. They decided to study the effects of shape and size, by preparing both cubic and spherical Pd nanoparticles as catalysts for the enantioselective hydrogenation of unsaturated carboxylic acids. The studies conducted by the Shen group clearly indicate that the Pd nanocubes have a upperhand, as they provide good enantioselectivities as compared to the spherical nanoparticles. They also found that the Pd nanocubes of larger size provided with excellent enantioselecctivities as compared to the smaller nanocubes. The dynamics of this can be explained by the fact that larger nanocubes, which have more flat sites, can easily accommodate the chiral modifier (like cinchonidine) on its surface along with the substrate, thus resulting in higher enantioselectivities. Meanwhile, the smaller nanocubes provided higher yields, as they are equipped with more edge sites, which accelerates the process of hydrogenation. The present study provides with a customizable formula with both small and large nanocubes put to different use.

Activity desired Pd Nanocubes customized to
Racemic Hydrogenation at High yields Small  size
Enantioselective Hydrogenation at Lower yields Large size

Thus, the present paper brings forward the fresh concept of customized Pd nanocubes, which can be an effective weapon in the armory of catalysts for enantioselective hydrogenation of α,β-unsaturated carboxylic acids.

Palladium nanocubes as customizable weapons for enantioselective hydrogenation

Customizable Palladium Nanocubes for Racemic/Enantioselective hydrogenation

To read more, follow the link below:

Enantioselective hydrogenation of α,β-unsaturated carboxylic acids on Pd nanocubes
Chunhui Chen, Ensheng Zhan, Na Ta, Yong Li and  Wenjie Shen

Catal. Sci. Technol., 2013, Advance Article
DOI:
10.1039/C3CY00314K

Shreesha Bhat, Web Writer Shreesha Bhat is a M.S.(Pharm.) in Medicinal Chemistry from National Institute of Pharmaceutical        Education and Research, India. His area of interests include chemical synthesis of biologically important  molecules and developing newer methods for organic synthesis using novel catalysts.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)