Catalysis Science & Technology is now on LinkedIn

If you’re on LinkedIn you’ll be delighted to hear that we are too!

Catalysis Science & Technology now have our own LinkedIn group, so come join us, to keep in touch with what is going on in the journal.

.

LinkedIn not your thing? Sign up to get table of contents e-alerts instead. You get an email every month with a list of articles in each issue of Catalysis Science & Technology, and as all our content is free throughout 2011 and 2012, you’ll get to click through and read anything that catches your eye.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Ad hoc Titanium mesh for air and water purification

Titanium doxide is an extremely versatile photocatalyst that can be employed in a wide range of reactions used in environmental decontamination, such as, CO2 and nitric oxide oxidation among many. Not surprisingly new ways to employ this flexible system are developed every year.

Recently, a large amount of research in this field focused on improving the characteristics of the support used for the catalyst, with the aim to enhance its performances or adapt to specific reaction conditions.

In this same context, the group led by Tsuyoshi Ochiai developed a procedure to easily fabricate catalytic filter material based on chemically etched titanium sheets impregnated with titanium dioxide for applications in air- and water-decontamination.

This new titanium mesh was fabricated by applying a layer of resist on both sides of a titanium sheet followed by chemical etching. The pattern of the pores could easily be controlled during the application of the resist layer, allowing to great control in the mesh structure. The finished structure was further modified to be finally coated with TiO2 anatase sol-gel.

The material was then tested against commercial titanium mesh coated following the same procedure in the photocatalytic (UV light promoted) degradation of acetaldehyde at room temperature and atmospheric pressure, revealing the superior performances of the new material, the measured rate constant of the group`s titanium mesh being 2.5 times higher than the commercial one.

The activity of the material was also assessed in water and determined with a mehylene blue decolorisation test. The purification performance both in air and water did not decrease over repeated tests, indicating a good adhesion of the TiO2 nanoparticles onto the surface of the mesh. Tests performed without irradiation resulted in no reaction, proving the photocatalytic nature of the process.

The  increased activity of the new coated titanium mesh has been ascribed by the authors to the good morphology of their material, with its highly ordered structure of interconnected macropores and the crystallinity of the TiO2 coating.

Continue reading this communication here or access the ESI here.

Fabrication of a TiO2 nanoparticles impregnated titanium mesh filter and its application for environmental purification
Tsuyoshi Ochiai, Toru Hoshi, Houda Slimen, Kazuya Nakata, Taketoshi Murakami, Hiro Tatejima, Yoshihiro Koide, Ammar Houas, Takuji Horie, Yuko Morito and Akira Fujishima
Catal. Sci. Technol., 2011, Advance Article
DOI: 10.1039/C1CY00185J, Communication

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Hot Article: Iridium clusters in ethene hydrogenation

This Catalysis Science & Technology Hot paper looks at how species like ethylidyne, ethyne, vinylidene and ethane are formed during ethene hydrogenation on iridium clusters.

The authors look at the structure and stability of the bare and hydrogenated iridium tetramers involved in the process.

Read the full article for FREE to find out more…

Interaction of ethene and ethyne with bare and hydrogenated Ir4 clusters. A density functional study
Galina P. Petrova, Georgi N. Vayssilov and Notker Rösch
Catal. Sci. Technol., 2011, DOI: 10.1039/C1CY00114K

.

Don’t forget to follow us on Twitter, like us on Facebook and sign up for free access and table of content e-alerts.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Catalysis Science & Technology at Europacat X

Jamie Humphrey, Managing Editor for Catalysis Science & Technology will be at Europacat X, in Glasgow at the end of August.

Keynote speakers include Istvan Horvath, Matthias Beller, Rutger van Santen and Charles Campbell. Find out more about the conference by visiting the Europacat website, or contact us if you’re going to be there.

See what other conferences the team will be attending by seeing our earlier blog post…

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Hot Article: Making phenol with vanadium silicalite zeolites

Changwei Hu and colleagues from Sichuan University, investigate vanadium silicalite zeolite catalysts in this Catalysis Science & Technology Hot article.

The authors particularly look at the selective oxidation of benzene to phenol with hydrogen peroxide in acetic acid as the solvent.

Read the full article to find out more about this method of making phenol…

Nature of vanadium species on vanadium silicalite-1 zeolite and their stability in hydroxylation reaction of benzene to phenol
Bin Guo, Liangfang Zhu, Xiaoke Hu, Qian Zhang, Dongmei Tong, Guiying Li and Changwei Hu
Catal. Sci. Technol., 2011, DOI: 10.1039/C1CY00105A

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Effective benzylic alcohol oxidation with simple catalysts

The oxidation of alcohols to carbonyl compounds holds an important place in the transformations of organic molecules, especially the selective oxidation to aldehydes or ketones without overoxidation. The importance of these transformations lies in the usefulness and reactivity of carbonyl compounds as synthons in organic synthesis. Many techniques and reagents are available for this reaction, but they tend to suffer from the need for stoichometric amounts of oxidants, as in the case of permanganate and chromate based oxidants.  Ideally, the most environmentally friendly and efficient process of transforming alchools in their respective carbonyl compounds would be by employing metal catalysts that can exploit molecular oxygen as the oxidant. Although several systems have been developed that achieve this goal, they generally require additives, ligands, sacrificial substrates or high pressures of oxygen.

With these limitations in mind, Ma and Lei have been focusing their efforts on the development of simpler systems to achieve selective oxidations of alcohols to aldehydes and ketons (a short selection of their recent publications can be found here and here) , and recently discovered a simple methodology that only requires AlBr3 6H2O and athmospheric oxygen to efficiently convert primary benzylic alcohols in their corresponding aldehydes with high selectivity and yields.

Employing a catalyst loading of 30% in dioxane in a batch reactor at the mild temperature of 70 °C afforded conversions of primary benzylic alcohols up to 100% with total selectivity for aldehyde in several cases, with 89% being the minimum selectivity measured. Running the reaction in an argon athmosphere instead of air resulted in only trace amounts of benzaldehydes and the use of anhydrous conditions did not change the outcomes of the transformation, suggesting that moisture in solvents or gases does not affect the reaction; in addition, nitro and ether moyeties on the ring were well tolerated.

In order to gather insights into the mechanism of the reaction, a set of isotope-labelling experiments have been performed and suggested that the oxygen atom is derived from the oxidant and not from a rearrangement of the original molecule.

When the conditions were applied to secondary benzylic alcohols,  the conversion rate of several diphenylmethanols into the corrisponding benzophenones suroassed 94%  with selectivities up to 80%, with the main side-products being the brominated derivatives.

In summary, Ma and Lei developed a simple system that does not use chlorinated solvents, environmentally unfriendly metals or complex ligands and conditions but still provided good yields and conversions with the substrates tested. Further study on a  broader substrate scope, refinement of conditions and mechanisms are underway.

Read this interesting communication in Catalysis Science & Technology.

AlBr3·6H2O catalyzed oxidation of benzylic alcohols
Yun-Mei Zhong, Heng-Chang Ma, Jin-Xia Wang, Xiao-Jie Jia, Wen-Feng Li and Zi-Qiang Lei
Catal. Sci. Technol., 2011, Advance Article DOI: 10.1039/C1CY00165E, Communication

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Hot Review Article: Syngas generations using gas to liquid processes

This Perspective article by Eduardo Falabella Sousa-Aguiar, from the Federal University of Rio de Janeiro, and colleagues, has been chosen as a Catalysis Science & Technology Hot article.

The review focuses on gas to liquid processes, which are used in the conversion of natural gas to hydrocarbons (either to form a synthetic version of crude oil, or more specific higher molecular weight hydrocarbons)

The authors look at the gas to liquid process for making syngas, catalytic partial oxidation of methane, membrane reactors, Fischer-Tropsch synthesis and also the technological aspects of a GTL plant.

Read the full article for FREE to find out more…

The main catalytic challenges in GTL (gas-to-liquids) processes
Eduardo Falabella Sousa-Aguiar, Fabio Bellot Noronha and Arnaldo Faro, Jr.
Catal. Sci. Technol., 2011, DOI: 10.1039/C1CY00116G

Don’t forget to follow us on Twitter, like us on Facebook and sign up for free access and table of content e-alerts.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Great opportunity to present your research!

Present your PhD or postdoctoral research to a UK audience of your peers…… Register now, Warwick, 20-21 September 2011!

A chance for networking and discussion

A chance to meet fellow postgraduates and postdocs from the wider UK inorganic and organometallic community this year at the Dalton Transactions Younger Researchers Symposium. The meeting, organised in associated with Johnson Matthey, is taking place in University of Warwick on 20-21 September 2011.

Registration for the symposium is FREE of charge and accommodation and the conference dinner cost comes to a mere £67 – a bargain indeed! Speakers include the 2010 Dalton Transactions Europe/Africa Lectureship Winner, Professor Karsten Meyer, Dr Erwin Reisner and Dr Michaele Hardie. More information available at the event webpage.

Register now! Deadline for abstracts: 22 July 2011

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Strategies in organocatalysts immobilisation

The beginning of the new century, in chemistry, has been often linked to the renaissance of organocatalysis as enthusiastically reported by articles appearing on Angewandte Chemie and Chemical Society Reviews in the past few years. Although presenting several advantages over traditional metal-based catalysts, such as high stereoselectivity, ease of synthesis and handling, and the general feeling of being more environmentally benign, they yet have to persuade industry into their large scale application.

Some of the reasons behind the fall-out of industry for organocatalysts lie in the lower efficiency they exhibit, the major difficulties of catalyst separation, recovery and recycling. Attempts to covalently bind organocatalysts on polymeric and other supports addressed the problems of separation but often resulted in a loss of activity triggered by modifications of structure of the catalyst.

In an interesting perspective appeared on Cat. Sci. Technol., Luo, Zhang and Chen presented an overview of alternative immobilisation techniques based on non-covalent bonds.

As stated by the authors, the loss of activity on covalently bound organocatalysts is likely to depend on the changes in the structure and chemical properties that these small organic molecules undergo when bound to the support. Non-covalent immobilisation, on the other hand, seems to circumvent this problem and, despite other shortcomings, might be a promising field of study.

Examples of acid-base immobilisation presented include the use of solid acid like polyoxometalates or polystyrene sulfonic acids as the support, used with chiral amines-based catalysts in the aldol reaction and Michael additions, where recovery of the catalyst could be achieved by precipitation with diethyl ether. Other immobilisation strategies presented are the incorporation of the organocatalyst into a phase transfer catalysts (PTC) and the immobilisation into clays. The latter is achieved on materials such as montmorillonite, which comprises negatively charged layers  alternated with layers of Na+ species.Using a cation exchange process, molecules such as proline and proline derived structures could be immobilized in the interlayers and the resulting material successfully used in aldol reactions. Another family of supports is represented by ionic liquids, where an organocatalysts is used as the anionic partner in the structure, creating chiral ionic liquid s that had been used to catalyse Mannich-type and aza-Diels-Alder reactions. Other supports mentioned are self-supported gel-type organocatalysts, biphasic immobilisation and techniques based on hydrophobic interactions, using cyclodextrines as the supports.

Several detailed examples and references for each category, inviting the interested reader to further reading.

In the authors` words  – the non-covalent immobilisation is anticipated to provide a viable solution to enhance the applications of organocatalysis with “practical” credentials.

Read the full article here

Perspective
Non-covalent immobilisation of asymmetric organocatalysts
Long Zhang, Sanzhong Luo and Jin-Pei Cheng
Catal. Sci. Technol., 2011, Advance Article
DOI: 10.1039/C1CY00029B

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

ICIQ Summer School on organometallic catalysis

The Institute of Chemical Research of Catalonia (ICIQ), Tarragonna, Spain, is hosting a summer school on organometallic catalysis in July.

The idea of the meeting is to bring together young researchers and distinguished chemists working in organometallic catalysis.

Dr Jamie Humphrey, Catalysis Science & Technology Managing Editor, will be attending and speaking on how best to prepare an article for publication. Jamie will be joining a range of notable speakers including Profs Amos B. Smith III, John Hartwig, Paul Knochel and Polly Arnold. To find out more, visit the ICIQ Summer School website…

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)