Archive for February, 2014

Fastest journal in catalysis research

Catalysis Science & Technology publishes research faster than any other catalysis journal

CatSciTech Cover

The average time to publication for Catalysis Science & Technology is shorter than for any other high-impact catalysis journal*. In a recent survey by the Catalysis Science & Technology editorial office, the time between when an article is received and its first online publication was compared for all primary and secondary research articles published in ACS Catalysis, ChemCatChem, Journal of Catalysis and Catalysis Science & Technology in 2013.

The mean time to publication for Catalysis Science & Technology in 2013 was 65 days, more than 10 days faster than the next fastest journal. Our survey also highlighted that Catalysis Science & Technology’s times to publication are getting even shorter, as indicated by a mean time of just 55 days between September and December 2013.

Catalysis Science & Technology publishes 12 issues a year containing primary articles, communications, perspectives and mini reviews covering all fundamental science and technological aspects of catalysis. In addition to rapid publication times, our fair and impartial peer-review process means the content we publish is always of the highest possible quality.

Why not take advantage of the shortest time-to-publication in catalysis science and submit your next article to Catalysis Science & Technology?

* Defined as specialised journals publishing catalysis with an impact factor greater than 3.5

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Chromium complexes catalyse carbon dioxide/epoxide copolymerization

Homogeneous catalysts for the copolymerisation of carbon dioxide and epoxides encompass a wide range of main group and transition metal complexes; these often incorporate multidentate ligands such as porphyrins, salens, and salans, among other related classes. Amine-bis-phenolates are one class of ligands which have been employed as supporting scaffolds for polymerisation catalysts, providing tunability at the metal centre by functional group modifications at both the aromatic ring positions and on the neutral pendent donor atom. Recent research by the Kozak Group at Memorial University of Newfoundland has focussed on developing amine-bis(phenolate) complexes of mid-to-late transition metals as catalysts for this reaction. In a recent paper published in Catalysis Science & Technology, three six-coordinate chromium complexes with two types of pendent arm were evaluated as copolymerisation catalysts.

The most active catalyst in this study utilised a ligand featuring a coordinated tetrahydrofuranyl pendent group, while ligands featuring non-coordinating benzyl groups resulted in lower yields of the poly(cyclohexene carbonate) product. Although the polymer produced was atactic in all cases, the catalyst was found to be advantageous due to the high percentages of carbonate linkages prevailing in the final product with no evidence suggesting undesirable formation of cyclic carbonate formation.

Read the orginal paper below, which was also cited as a HOT article by the Catalysis Science & Technology referees:

Chromium(III) amine-bis(phenolate) complexes as catalysts for copolymerization of cyclohexene oxide and CO2
Hua Chen, Louise N. Dawe, and Christopher M. Kozak
Catal. Sci. Technol., 2014, Advance Article, DOI: 10.1039/C3CY01002C


Jenna Flogeras

Jenna Flogeras obtained her B.Sc. and M.Sc. in Chemistry from the University of New Brunswick (Fredericton), Canada. She is currently working towards her Ph.D. at Memorial University of Newfoundland, under the supervision of Dr. Francesca Kerton. Her research is focused on the synthesis of biodegradable polymers using main-group metal complexes as catalysts.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

HOT articles for February

Alkali- and nitrate-free synthesis of highly active Mg–Al hydrotalcite-coated alumina for FAME production
Julia J. Creasey, Alessandro Chieregato, Jinesh C. Manayil, Christopher M. A. Parlett, Karen Wilson and Adam F. Lee  
Catal. Sci. Technol., 2014,4, 861-870
DOI: 10.1039/C3CY00902E

Graphical abstract

Free to access until 20th March 2014


Rearrangement of aldoximes to amides in water under air atmosphere catalyzed by water-soluble iridium complex [Cp*Ir(H2O)3][OTf]2
Chunlou Sun, Panpan Qu and Feng Li  
Catal. Sci. Technol., 2014, Advance Article
DOI: 10.1039/C3CY00934C

Graphical abstract

Free to access until 20th March 2014


Dimerization of ethene in a fluidized bed reactor using Ni-based Supported Ionic Liquid Phase (SILP) catalysts

Florian T. U. Kohler, Konstantin Gärtner, Veit Hager, Marco Haumann, Michelle Sternberg, Xinjiao Wang, Normen Szesni, Karsten Meyer and Peter Wasserscheid  
Catal. Sci. Technol., 2014, Advance Article
DOI: 10.1039/C3CY00905J

Graphical abstract

Free to access until 7th March 2014


Kinetic Monte Carlo simulations of heterogeneously catalyzed oxidation reactions
Franziska Hess and Herbert Over  
Catal. Sci. Technol., 2014, Advance Article
DOI: 10.1039/C3CY00833A

Graphical abstract

 

Free to access until 7th March 2014

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Nature leads the way: A Biomimetic Tricopper complex as a catalyst for selective oxidation of smaller alkanes

2014 has arrived and with it a new batches of Hot Articles, one of which from January deserves special attention. Professor Sunny Chan‘s group at Academia Sinica,  Taiwan have achieved the distinction of being the first group to devise a molecular catalyst for the selective oxidation of methane to methanol. This reaction faces a formidable challenge in the form of inertness of the methane C–H bond which makes O-atom insertion into the molecule almost impossible in ambient conditions.  Even if this problem is solved, the product, methanol, is highly susceptible to over-oxidation leading to formation of other undesired products. For of these reasons, most of the researchers have failed to scale this gargantuan mountain of difficulties.

Time and again when scientists have found it difficult to get answers to tough and challenging problems they have turned to nature for inspiration. In this case, the solution lay in a particular class of enzymes called methane monoxygenases (MMO) found in the methanotrophic bacteria. These MMOs have metallic clusters at their centres, which catalyse this difficult reaction with ease. In order to emulate these catalytic centres, the researchers developed some biomimetic models containing tricopper clusters, one of which, [CuICuICuI(7-N-Etppz)][ClO4], successfully mediated the selective oxidation of methane without any over-oxidation. This tricopper complex, when activated by dioxygen (O2), harnesses a “singlet oxene”, the strongest oxidant that could be used for a facile O-atom insertion across the C-H bond.

Biomimetic Tricopper complex as a catalyst for selective oxidation of methane to methanol

The catalyst also gave selectivity in the cases of ethane and propane, but not with higher alkanes. The reason being is the design of the tricopper catalyst, which has a small hydrophobic binding pocket at the base and forms a transient complex with the alkane and carries out the oxene transfer to oxidize the substrate. This pocket is not big enough to accommodate the product methanol (as well as the other small alcohols), so it releases the product as soon as it is formed. This removes over-oxidation from the equation, giving profound selectivity in cases of smaller alkanes. The authors have further studied the catalytic cycles and analysed the factors affecting the catalytic turnovers and efficiency.

This work presents a move towards a more efficient flow system which, in the future, would help in increasing the yields of the products. One issue with the current system is the solubility of the catalyst in solvents which can dissolve CH4 gas which may be put to rest by some modification in the design of the catalyst, leaving brighter prospects for the future.

To find out more about this nature-inspired discovery, read the full article now for more details.

Developing an efficient catalyst for controlled oxidation of small alkanes under ambient conditions
Penumaka Nagababu, Steve S.-F. Yu, Suman Maji, Ravirala Ramu and Sunney I. Chan
Catal. Sci. Technol., 2014, DOI: 10.1039/C3CY00884C


Shreesha Bhat, Web Writer Shreesha Bhat is a M.S.(Pharm.) in Medicinal Chemistry from National Institute  of  Pharmaceutical Education and Research,  India. He has recently joined the research group of  Dr. Pallavi Sharma as a PhD student at the  University of Lincoln, UK. His project involves  the design and synthesis of Helicase-primase inhibitors for Herpes Simplex virus and development of useful synthetic methodologies.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)