Archive for the ‘Hot Article’ Category

Magnetic Steering of Soft Liquid Metal Machines

Gallium-based liquid metals are a family of unique materials with remarkably low melting points (~15.5 ℃). They remain liquid at room temperature and can conform to their surrounding environment, making them an ideal candidates for producing soft machines. Soft machines can move forward and pass through barriers by ingeniously adapting their bodies to the surrounding environment. Therefore, soft machines have advantages over their rigid counterparts, for applications in confined space and on rough terrains.

To investigate the potential of liquid metal (eutectic gallium indium) for soft machine uses, researchers from Xi’an Jiaotong University, China described a magnetic scenario to effortlessly and precisely control the motion of liquid metal-based soft machines. The soft machine was powered by micro-scale magnetic beads embedded inside the liquid metal. When the magnetic field was on, the beads quickly responded to it, moved to the boundary of the liquid metal and dragged the liquid metal to move in any direction, as guided by the applied magnetic field.  The moving speed of the soft liquid metal machine could be well modulated in a certain range. Interestingly, once the soft machine was no longer required, its movability was stopped by extracting the embedded “engine” (the magnetic beads) with a simple fast move of the magnet. In addition, the ability to perform in various environments (on a solid surface and in water) ensures this magnetic method can be a versatile way to steer liquid metal machines.

Magnetic Steering of Soft Liquid Metal Machines

Figure 1. Magnetic steering of soft liquid metal machines. (a) Schematic illustration of the fabrication and motion of liquid metal machines. (b, c) Liquid metal machine locomotion for on paper (b) and in water (c) cases under magnetic control.

 

The liquid metal is unique in combining liquid-like fluidity and metal-like electrical conductivity, so soft machines based on liquid metal are quite promising for electronic applications. To uncover this potential, the group designed such liquid metal machines as elements for healing paper-based flexible electronics. In their experimental demonstrations, liquid metal machines were driven by a magnetic field to reconnect the open circuit of an AND-OR logic circuit by gluing the isolated electrodes together.

This research offers a novel route to control the steering motion of liquid metal mobiles and gearing soft machines with easy accessibility and direct control. This can inspire those working on magnetics to explore new application realms for magnetic actuation.

Magnetic steering of liquid metal mobiles Soft Matter, 2018, Advance Article. DOI: 10.1039/C8SM00056E

Read this article for FREE until 8 May

 

About the web writer

Dr Xingcai ZhangDr. Xingcai Zhang is a Harvard SEAS Fellow at Harvard University. He was a postdoc researcher at MIT/SYSU. His expertise includes chemistry, bionanomaterials, bionanomedicine, nanotea, natural products, carbon/polymer/natural/two-dimensional materials for biomed/catalysis/absoption/energy applications. Dr. Zhang serves as an Associate Editor for a Springer Nature journal and is on the Advisory Board of a Wiley cancer journal and an editor of a cancer journal. Some of Dr. Zhang`s publications can be found at: http://orcid.org/0000-0001-7114-1095 and he can be reached at xingcai@mit.edu and mylovetea@outlook.com

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Shape memory polymers get a grip

Researchers in the US have developed a new way to curl polymer sheets to create a variety of 3D structures.

Shape memory polymers change shape in response to external stimuli such as light and heat. Chemists add active materials to polymer sheets, which then deform on stimulation. Usually the active materials are placed in regions where curvature is desired, but Michael Dickey, Jan Genzer and their colleagues at North Carolina State University have now shown they can deform regions adjacent to the active materials.

 

Source: © Royal Society of Chemistry



Read the full story by Laura Fisher in Chemistry World.


This article is free to access until 14 April 2017.

A M Hubbard et al, Soft Matter, 2017, DOI: 10.1039/c7sm00088j

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Crystal expansion makes light work of moving microbeads


Moving microbeads in liquid crystals
Light-induced displacement of a microbead through the thermal expansion of liquid crystals


By exploiting local thermal expansion and mesophase changes, scientists from Japan are able to move microbeads dispersed in a liquid crystal using UV light, despite neither material being light-responsive.


Takenaka and Yamamoto from the National Institute of Advanced Industrial Science and Technology in Japan have used UV light to move a microbead through a 4-cyano-4′-pentylbiphenyl liquid crystal, without the need for a complicated experimental setup or addition of photo responsive materials.


Read the full story by Amy Middleton-Gear in Chemistry World.



This article is free to access until 16 January 2016

Y Takenaka and T Yamamoto, Soft Matter, 2016. DOI: 10.1039/C6SM02324J

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Jamming and unjamming of cell co-cultures

Cell behavior is highly dependent on its surrounding environment, including neighboring and adjacent cells. Individual cells can merge and form a solid-like state for a “jamming” effect or a highly dense cell mass can disperse and become more mobile, for an “unjamming” transition. Both behaviors have been observed in complex, multi-cellular interactions such as wound healing, embryonic development, and tumor metastasis.

To investigate jamming-unjamming cell transitions, researchers from Brown University describe methods to quantify cell-cell interactions in a recently published Soft Matter article. The group observed co-cultures of epithelial cells and mesenchymal cells and their ability to cluster (jamming) or remain mobile and unconnected (unjamming). Epithelial cells collectively organize to form dense multi-layered cell sheets while mesenchymal cells avoid cell-cell bonds and are capable of individual migration.

Cell clustering ability with different ratios of epithelial (red) and mesenchymal cells (green)

By increasing the number of mesenchymal cells in an epithelial cell population, the research group observed a reduction in epithelial cell clustering causing a significant disruption in cell sheet formation and confluency. The addition of mesenchymal cells also increased the average collective cell velocity and decreased cell proliferation, reducing the typical jamming behavior of epithelial cells.

The research provides important biophysical data for collective cell behavior as well as introducing new parameters to control cell jamming-unjamming transitions.



Interested in this research? Read the full article for free until 31/10/2016 using a registered RSC account:
Clustering and jamming in epithelial-mesenchymal co-cultures
Marielena Gamboa Castro, Susan E. Leggett, and Ian Y. Wong
Soft Matter, 2016, Advance Article
DOI: 10.1039/C6SM01287F


—————-

About the webwriterMorgan M. Stanton

Dr. Morgan M. Stanton is currently a postdoctoral researcher at the Max Planck Institute for Intelligent Systems in Stuttgart, Germany. Her research focuses on the cell-material interface material and properties regulating cell behavior.

Read more about Morgan’s research publications and follow her on Twitter: @morg368.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Elastic Properties of the Brain

Young's modulus of the pituitary gland measured with AFM

Large variations in stiffness of the pituitary gland

The composition of the human body varies widely in rigidity from soft organs and fat to stiff bones.  The rigidity and stiffness of the body plays vital roles in cell behavior and tumor development, so measuring and understanding tissue stiffness is important for the design of biomaterials and cancer treatment.

In a recent Soft Matter article, a multidisciplinary group from Grenoble, France, has probed the elastic modulus of the brain, specifically the pituitary gland, which produces and regulates hormones. Unlike previous attempts, which have observed tissues at the macro scale (mm, cm), the research team has investigated the brain at the micron level.

At this subcellular scale, it was revealed that the tissue was not uniform in elasticity and there were vast differences in stiffness throughout the gland. Using atomic force microscopy (AFM), rigidity measurements from 1 kPa to 50 kPa were recorded with localized islands of increased stiffness observed.

This has been the first attempt to measure elasticity of the pituitary gland at the micron scale, providing research that could help understand cellular organization and the mechanism of tumor growth in the brain.



Interested in this research? Read the full article for free until 03/07/2016 using a registered RSC account:

AFM mapping of the elastic properties of brain tissue reveals kPa μm-1 gradients of rigidity
Nicolas Bouchonville, Mikaël Meyer, Christophe Gaude, Emmanuel Gay, David Ratel, and Alice Nicolas
Soft Matter, 2016,12, 6232-6239
DOI: 10.1039/C6SM00582A

—————-

About the webwriterMorgan M. Stanton

Dr. Morgan M. Stanton is currently a postdoctoral researcher at the Max Planck Institute for Intelligent Systems in Stuttgart, Germany. Her research focuses on the cell-material interface material and properties regulating cell behavior.

Read more about Morgan’s research publications and follow her on Twitter: @morg368.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Complex polymer nanostructures with solvent annealing

Fabrication of nanopatterns or nanostructures at a surface is often limited to the accuracy and resolution of the instrument.  Photolithography is successful at producing nanostructures, but the properties are restricted to the dimensions of the chosen mask.  In a current Soft Matter article, a collaborative research group has added an additional step to traditional photolithography to produce more complex micro- and nanostructures.  Initially, nano ‘pre-patterns’ were formed on substrates with photolithography; cross-linked polystyrene (PS), poly(methyl methacrylate) (PMMA), or a hydroxyl terminated polymer (PS-PMMA-OH) were patterned as nanostripes on a silicon wafer surface.  After the patterns were deposited, a second layer of block copolymer, PS-b-PMMA, was spincoated over the entire pre-pattern.  Finally, samples were incubated in a sealed container with an open vial of acetone to anneal the layer of PS-b-PMMA.  The solvent annealing of the block copolymer produced ordered nanostructures of PS-b-PMMA on top of the premade photolithography pattern.  PS-b-PMMA structures and dimensions varied with annealing time but remained ordered due to the initial chemical pre-pattern.  Unpatterned surfaces also developed nanostructure, but without any order to the polymer structures.

PS-b-PMMA nanopatterned polymer with acetone annealing

Nanopatterned polymer with solvent annealing

The mechanism of assembly of the block copolymer nanostructures was controlled by two factors: film thickness and migration of PMMA polymer chains from the bottom to the top of the surface as PMMA is more stable in an acetone vapor.  The combination of solvent annealing and chemical pre-patterning perturbs the polymer chain configurational energy and interfacial energy to instigate the nanostructure formation.  The polymer microdomains are formed while solvated and are retained after acetone removal.  The control of nanopattern dimensions with chemical pre-patterning and solvent annealing expands the application range of traditional photolithography.  This appealing fabrication procedure can be utilized by the seminconductor industry where complicated nanopatterns are used for data storage or electronics.

See the full Soft Matter article here:

Directed self-assembly of solvent-vapor-induced non-bulk block copolymer morphologies on nanopatterned substrates

Lei Wan, Shengxiang Ji, Chi-Chun Liu, Gordon S. W. Craig, and Paul F. Nealey


Morgan M. StantonDr. Morgan M. Stanton is currently a postdoctoral researcher at the Max Planck Institute for Intelligent Systems in Stuttgart, Germany. She completed her Ph.D. in Chemistry from Worcester Polytechnic Institute in 2014. Read more about Morgan’s research publications here or you can follow her on Twitter @morg368.

Follow the latest Soft Matter publications and updates on Twitter @softmatter or on Facebook.


Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Stable Liquid Drop Deformation with Nanoparticles

Miniature reaction vessels, such as liquid marbles, have shown significant promise for millimeter scale and low volume chemical and biological experiments. Here, solid particles are trapped at the drop surface, separating the interior liquid from the surface, so the droplet does not stick to the substrate. For large scale applications, liquid marbles have some handicaps, including their lack of optical clarity and their restriction to only a spherical shape. In a recent full article in Soft Matter, a collaborative research team has recently discovered a liquid marble alternative, where nanoparticles are squeezed onto a drop surface to alter its shape while still maintaining optical transparency and reaction vessel properties.

Water drops and liquid plasticine deformed with nanoparticles

Deformed water drops and examples of liquid plasticine.

To create the stable deformation of a liquid, a single water drop is placed between two glass surfaces. The two glass surfaces were coated with layers of hydrophobic silica nanoparticles. When the drop was squeezed between the two modified glass layers and then released, nanoparticles detached from the glass and became adhered at the water droplet surface. Once the squeezing force was released and as the droplet tried to recover to its original spherical shape, the new nanoparticle layers on the drop surface became “jammed”, and permanently deformed the water droplet shape. The final shape of the deformed droplet was determined by the squeezing force, but the shape of the droplet could be adjusted by injecting new water into the drop, breaking apart the surface nanoparticles.

Moving from single water drops to larger volumes and exploiting the jamming properties of the nanoparticles, liquid plasticines could be developed. The water was deformed into a variety of shapes and used as small reaction vessels. Multiple plasticines were joined for controlled chemical reactions and then quickly separated using a hydrophobic knife. As proof of concept, a liquid plasticine with gold nanoparticles was connected to DC power (30 V) allowing the gold nanoparticles to migrate to the positive end of the plasticine. The liquid was then cut to separate the gold particles from the rest of the liquid. The permanently deformed drops and liquid plasticines offer new alternatives for liquid lenses and small volume liquid reactors.

See the full Soft Matter article here:

Liquid plasticine: controlled deformation and recovery of droplets with interfacial nanoparticle jamming

Xiaoguang Li, Yahui Xue, Pengyu Lv, Hao Lin, Feng Du, Yueyun Hu, Jun Shen, and Huiling Duan



Morgan M. StantonDr. Morgan M. Stanton is currently a postdoctoral researcher at the Max Planck Institute for Intelligent Systems in Stuttgart, Germany. She completed her Ph.D. in Chemistry from Worcester Polytechnic Institute in 2014. Read more about Morgan’s research publications here or you can follow her on Twitter @morg368.

Follow the latest Soft Matter publications and updates on Twitter @softmatter or on Facebook.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Modeling boron nitride nanopores for DNA sequence detection

Quickly detecting DNA sequences with high accuracy is a significant goal for diagnostic medicine and genetics. The vast quantities of DNA and its small size make it difficult to achieve this goal. Nanopores offer a rapid method of detection by threading strands of DNA through a nanopore to detect individual nucleotides of the DNA. Solid-state nanopores separate two fluidic chambers and as the DNA passes through the pore, the pore becomes partially clogged and produces a blockage of ionic currents. The change in ionic current can be used to collect structural information from the DNA. Graphene has been well studied, experimentally and theoretically, for fabrication of these pores, but graphene produces significant complications with DNA detection. Graphene pores often contain material defects and DNA sticks to graphene, blocking the pores permanently, limiting detection capabilities. In a recent full article in Soft Matter, a collaborative research team tackles this issue by theoretically modeling DNA in a boron-nitride

Boron-nitride nanopore for double stranded DNA detection using molecular dynamics

Boron-nitride nanopore for double stranded DNA detection

Boron-nitride is composed of boron and nitride atoms in a honeycomb structure. The material is just as thin as graphene and exhibits similar desirable electrical and mechanical properties, but is more resistive to DNA adhesion, allowing the DNA to pass through the pore without permanent blockage. The research group used large-scale molecular dynamics to model double stranded DNA passing through boron-nitride pores ranging in size from 2.5 to 6.5 nm with an external voltage of 1.0 V. The smaller 2.5 nm pore size had greater blockage currents and a higher sensitivity to DNA threading through the pore than the larger pores due to its smaller cross-sectional area. Double stranded DNA composed of only adenine-thymine (A-T) or guanine-cytosine (G-C) nucleotide pairs were compared using the 2.5 nm pores with multiple applied voltages with the goal of understating the changes is current signal as the DNA passed through the pore. The greatest difference between A-T DNA and G-C DNA was observed at 1.0 V with G-C DNA exhibiting greater stretching and stress than the A-T DNA. Both sets of DNA passed readily through the boron-nitride nanopores without permanent blockage. In comparison, in modelling of DNA passing through graphene nanopores, DNA exhibited significant adhesion and breakage of the DNA at the pore. The large changes is current signal between A-T and G-C DNA and the lack of DNA adhesion using boron-nitride pores offer an exciting opportunity for future DNA sequencing. The molecular dynamic modeling presented will hopefully influence current experimental work in the development of DNA detection with nanopores.

See the full Soft Matter article here:

DNA translocation through single-layer boron nitride nanopores
Zonglin Gu, Yuanzhao Zhang, Binquan Luan and Ruhong Zhou
a


Morgan M. Stanton

Dr. Morgan M. Stanton is currently a postdoctoral researcher at the Max Planck Institute for Intelligent Systems in Stuttgart, Germany. She completed her Ph.D. in Chemistry from Worcester Polytechnic Institute in 2014. Read more about Morgan’s research publications here or you can follow her on Twitter @morg368.

Follow the latest Soft Matter publications and updates on Twitter @softmatter or on Facebook

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Bacteria motors guided by liquid crystals

Bacteria play a vital role in digestive, reproductive, and immune health within the human body.  Recently, motile bacteria have been analyzed for their ability to transport cargo in confined environments.  Bacteria convert surrounding chemical energy into mechanical work making them ideal for a micro scale motor.  Although bacteria have proven capable of transporting cargo, directing where they swim and understanding how they interact with the cargo has been a challenge.   A research group from University of Wisconsin-Madison, USA has utilized nematic liquid crystals to guide bacteria swimming and monitor how they associate with their cargo load. The full work is described in a recent communication article in Soft Matter.

P. mirabillis cell pushes a C. albicans cell

A motile P. mirabilis cell pushes a non-motile C. albicans cell

The motile bacteria, P. mirabilis, were used to push non-motile fungal cells, C. albicans, in a directed path.  Both the bacterial and fungal cells are found in patients with urinary tract infections.  The urinary epithelium secretes layers of mucus within the urinary tract which is guided by external flow; molecules and cells in the urinary tract exhibit directional alignment due to the mucus flow.  The proposed nematic liquid crystal environment with motile and non-motile cells represents a simple model of the human urinary tract.  The alignment of the liquid crystal guides the bacteria and causes them to swim along the director field, similar to cells in the urinary epithelium.  P. mirabilis were mixed with C. albicans and suspended within a 20 µm thick liquid crystal layer composed of disodium cromoglycate.  Single P. mirabilis cells pushed the non-motile C. albicans cells along the director of the liquid crystal, to give straight or curved swimming tracks depending on the crystal orientation.  The P. mirabilis were capable of reaching a velocity of 1 – 2 µm/s-1 while transporting their fungal cell cargo.

For a greater understanding of the cargo transport mechanism, 2 µm diameter beads were mixed with the P. mirabilis. Bacteria transporting beads were capable of reaching velocities of 5 µm/s-1.  The hydrodynamics of the system of swimming bacteria and particles was analyzed with the mathematical model, regularized Stokeslets.  The observed experimental swimming velocity correlated with numerical simulated results, with a clear trend of decreasing speed with increasing cargo size.  The mathematical model suggests hydrodynamic interaction of the bacteria flagella and cargo load are an important for predicting system velocity.  The work helps understand cellular interspecies interaction that is controlled with liquid crystal alignment.

See the full Soft Matter communication here:

Bacterial transport of colloids in liquid crystalline environments
Rishi R. Trivedi, Rina Maeda, Nicholas L. Abbott, Saverio E. Spagnolie, and Douglas B. Weibel
Soft Matter, Advanced Article, 2015
DOI: 10.1039/C5SM02041G


Morgan M. Stanton

Dr. Morgan M. Stanton is currently a postdoctoral researcher at the Max Planck Institute for Intelligent Systems in Stuttgart, Germany.  She completed her Ph.D. in Chemistry from Worcester Polytechnic Institute in 2014.  Read more about Morgan’s research publications here or you can follow her on Twitter @morg368.

Follow the latest Soft Matter publications and updates on Twitter @softmatter or on Facebook

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Hydrogel capable of protein release using red light

Hydrogel synthesis is a well-established method of incorporating cells, proteins, or drugs into a biocompatible polymer network.  The majority of hydrogels are stimulated and cross-linked by a chemical reaction or UV light, but this can limit their use in vivo as these methods damage healthy cells. Using red light-stimulated hydrogels would be better suited for the therapeutic use of hydrogels, as it creates little photo damage to cells and red light can penetrate deeper into tissue than other light wavelengths. Such a hydrogel was developed by a research group at the Max Planck Institute for Polymer Research in Germany and is described in detail in a recently published full article in Soft Matter. The group describes a synthetic method of hydrogel formation using methoxy-modified azobenzene that activates the polymer complex under red light.

azobenzene trans-to-cis transition with β-cyclodextrin using red light

The hydrogel synthesis is based on the spontaneous formation of a supramolecular complex by combining an azobenzene (mAzo) derivative and β-cyclodextrin (β-CD).  The two chemical species were individually grafted onto a poly(acrylic acid) (PAA) polymer backbone and mixed to form the red light-activated hydrogel.  During exposure to red light, the azobenzene moiety in mAzo underwent isomerization from the trans to cis state, which was not hindered by the presence of β-CD.  The process is reversible, with heat or blue light returning mAzo to the trans state.  While the mAzo polymer remained in the trans state, the mAzo/β-CD complex maintained a gelatin formation, but once altered to the cis state by red light, the hydrogel destabilized and became a liquid.  This sol-to-gel transition is explained by the high binding constant between trans mAzo and β-CD (Ka = 1546 M-1) compared to low binding constant between cis mAzo and β-CD (Ka = 82.1 M-1).

To demonstrate the hydrogel’s utility for medical applications, the hydrogel was loaded with the protein, bovine serum albumin (BSA).  Exposure to red light dissolved the hydrogel and released ~83% of the protein into solution.  If a piece of porcine tissue was placed between the red light source and the protein laden hydrogel, mAzo was still capable of transitioning to the cis state for disassembly of the gel and release of the BSA.  The ability of the hydrogel to be activated through tissue using non-invasive and non-detrimental red light is an impressive step for the development of therapeutic and light-stimulated polymers for controlled drug or protein release.

See the full Soft Matter article here:

Supramolecular hydrogels constructed by red-light-responsive host–guest interactions for photo-controlled protein release in deep tissue
Dongsheng Wang, Manfred Wagner, Hans-Jürgen Butt, and  Si Wu
Soft Matter, 2015, Advance Article
DOI: 10.1039/C5SM01888A


Morgan M. StantonDr. Morgan M. Stanton is currently a postdoctoral researcher at the Max Planck Institute for Intelligent Systems in Stuttgart, Germany.  She completed her Ph.D. in Chemistry from Worcester Polytechnic Institute in 2014.  Read more about Morgan’s research publications here or you can follow her on Twitter @morg368.

Follow the latest Soft Matter publications and updates on Twitter @softmatter or on Facebook


Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)