Author Archive

A year of water splitting from one device

 Abigail Hallowes writes about an EES article in Chemistry World


Researchers from the US have optimised a photoelectrochemical cell (PEC) so that it can continuously split water into clean burning hydrogen and oxygen for over 2200 hours – the equivalent to one year of outdoor operation.

In order for PECs to be a competitive energy provider, they should efficiently covert solar into chemical energy, whilst remaining stable for years of continuous operation. The condition of the electrodes in PECs is a major concern as they immediately start to corrode once immersed in the electrolyte. Previous PEC researchers have only been able to produce systems that are either stable for 4–100 hours but inefficient, or efficient but only stable for a few minutes; they have not been able to incorporate both required properties.

Scanning-electron micrograph image of a microwire array with its protective coating

Scanning-electron micrograph image of a microwire array with its protective coating

 
Electrode instability is brought on when the energy required to excite an electron is within the same energy range that causes electrode corrosion; photocorrosion then becomes competitive with water splitting. In these cases, it is most likely that photocorrosion is thermodynamically more favourable which therefore leads to unstable electrodes. Now, a team led by Nathan Lewis at the California Institute of Technology have drastically increased PEC stability whilst achieving a 100% Faradaic efficiency for oxygen evolution.
 
Their approach increased the electrochemically active sites versus the surface area of the electrode through the use of silicon microwire arrays; this led to a decrease in the effective current density at the electrode–electrolyte interface, increasing the energy required for photocorrosion, which decreased the rate of photocorrosion. They also coated the arrays in a protective but conductive layer, to act as a corrosion-resistant barrier while maintaining efficient charge transfer to the reaction sites, as well as with an oxygen evolution catalyst to promote water oxidation.
 
Brian Seger, a photoelectrochemist at the Technical University of Denmark, explains that water splitting provides some very corrosive conditions so stability has been a large hurdle in this field: ‘The fact that the Lewis group could test their device for three months with no noticeable corrosion indicates that this hurdle is surmountable.’
 
Materials scientist, Dongyuan Zhao, of Fudan University, China, describes the work was a breakthrough and says it ‘shows great potential for industrial application.’

Interested to find out more? Read the full article by Abigail Hallowes in Chemistry World.

Read the original article in Energy and Environmental Science:

Stabilization of Si microwire arrays for solar-driven H2O oxidation to O2(g) in 1.0 M KOH(aq) using conformal coatings of amorphous TiO2
Matthew R. Shaner,ab   Shu Hu,ab   Ke Sunab and   Nathan S. Lewis
Energy Environ. Sci., 2015, Advance Article
DOI: 10.1039/C4EE03012E

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

HOT articles in EES

These articles are available free for a limited time:

Combining experimental and theoretical methods to learn about the reactivity of gas-processing metalloenzymes
Claudio Greco, Vincent Fourmond, Carole Baffert, Po-hung Wang, Sébastien Dementin, Patrick Bertrand, Maurizio Bruschi, Jochen Blumberger, Luca de Gioia and Christophe Léger  
DOI: 10.1039/C4EE01848F, Review Article

C4EE01848F GA

Measuring thermoelectric transport properties of materials
Kasper A. Borup, Johannes de Boor, Heng Wang, Fivos Drymiotis, Franck Gascoin, Xun Shi, Lidong Chen, Mikhail I. Fedorov, Eckhard Müller, Bo B. Iversen and G. Jeffrey Snyder  
DOI: 10.1039/C4EE01320D, Review Article

Pt–Ru catalyzed hydrogen oxidation in alkaline media: oxophilic effect or electronic effect?
Ying Wang, Gongwei Wang, Guangwei Li, Bing Huang, Jing Pan, Qiong Liu, Juanjuan Han, Li Xiao, Juntao Lu and Lin Zhuang  
DOI: 10.1039/C4EE02564D, Communication

A general framework for the assessment of solar fuel technologies
Jeffrey A. Herron, Jiyong Kim, Aniruddha A. Upadhye, George W. Huber and Christos T. Maravelias  
DOI: 10.1039/C4EE01958J, Analysis

C4EE01958J GA

Nickel oxide encapsulated nitrogen-rich carbon hollow spheres with multiporosity for high-performance pseudocapacitors having extremely robust cycle life
Se Yun Kim, Hyung Mo Jeong, Jun Ho Kwon, Il Woo Ock, Won Hyuk Suh, Galen D. Stucky and Jeung Ku Kang  
DOI: 10.1039/C4EE02897J, Communication

Shale gas-to-syngas chemical looping process for stable shale gas conversion to high purity syngas with a H2:CO ratio of 2:1
Siwei Luo, Liang Zeng, Dikai Xu, Mandar Kathe, Elena Chung, Niranjani Deshpande, Lang Qin, Ankita Majumder, Tien-Lin Hsieh, Andrew Tong, Zhenchao Sun and Liang-Shih Fan  
DOI: 10.1039/C4EE02892A, Paper

Evaluating different classes of porous materials for carbon capture
Johanna M. Huck, Li-Chiang Lin, Adam H. Berger, Mahdi Niknam Shahrak, Richard L. Martin, Abhoyjit S. Bhown, Maciej Haranczyk, Karsten Reuter and Berend Smit  
DOI: 10.1039/C4EE02636E, Paper

Stabilization of Si microwire arrays for solar-driven H2O oxidation to O2(g) in 1.0 M KOH(aq) using conformal coatings of amorphous TiO2
Matthew R. Shaner, Shu Hu, Ke Sun and Nathan S. Lewis  
DOI: 10.1039/C4EE03012E, Communication

C4EE03012E GA

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)