Archive for the ‘News’ Category

ChemComm poster prize winner at the 2018 European Materials Research Society Spring Meeting

The 2018 European Materials Research Society (EMRS) Spring Meeting was held from the 18th – 22nd June in the Strasbourg Convention Centre in France.

The EMRS Spring Meeting is the society’s major conference and covers all aspects of materials science including energy and environment, biomaterials, semiconductors, nanomaterials, functional materials, and materials processing and characterization. It offers on average 25 topical symposia and is widely recognised as being of the highest international significance, with approximately 2,500 attendees every year.

ChemComm is proud to announce that the ChemComm poster prize was awarded to Dr Manal Alkhamisi from the University of Nottingham (School of Physics and Astronomy) for ‘The Growth and Fluorescence of Phthalocyanine Monolayers and Thin Films on Hexagonal Boron Nitride’. Manal was awarded the prize by ChemComm Associate Editor Steven De Feyter.

Well done Manal!

 

ChemComm Associate Editor Steven De Feyter (left) awarding the poster prize to Dr Manal Alkhamisi (right)

 

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Nucleus infiltrated by peptide gene switch

Researchers in India have taken a step towards selective gene regulation by making a peptide-based artificial transcription factor that can upregulate a luciferase reporter gene in mammalian cells.1

Source: © Royal Society of Chemistry
Top: Schematic representation of the artificial transcription factor. DBD = DNA binding domain, NLS = nuclear localisation signal, AD = activationdomain, CPP = cell penetrating peptide. Bottom: The main DNA recognition motif is a pair of symmetry related helices inserted into the major groove of the target DNA.

Transcription factors are proteins that bind to specific DNA sequences and control gene expression by converting DNA to RNA. Since transcription factors are important for turning genes on or off, the researchers hope that artificial transcription factors could treat diseases by rebalancing perturbations in cellular pathways. Lead researcher, Siddhartha Roy, from the Bose Institute in Kolkata, says their work ‘is part of a continuing effort to develop small peptides that are deliverable inside the cell and can regulate – either inhibit or activate – the expression of specific genes.’

Read the full story by Fiona Tscherny on Chemistry World.

References

1 K Roy et al, Chem. Commun., 2018, DOI: 10.1039/c7cc09279b

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Photoredox sugar synthesis plausible on early Earth

Scientists in the US have carried out experiments confirming that ultraviolet light could have driven the synthesis of simple prebiotically important sugars under conditions found on early Earth.1


Source: © Royal Society of Chemistry
UV light photooxidises cyanocuprates, producing aqueous electrons, which are key for putting into motion a reaction network capable of producing glycolaldehyde and glyceraldehyde

Back in 2012, Dougal Ritson and John Sutherland,2 at the Medical Research Council Laboratory of Molecular Biology in Cambridge, UK, synthesised sugars from cyanocuprates using ultraviolet light – findings that supported the RNA world hypothesis for the origin of life. Now Zoe Todd and Dimitar Sasselov from the Harvard-Smithsonian Centre for Astrophysics, and their colleagues have performed similar experiments, but at lower, and more representative, wavelengths than those previously considered.

Read the full story by Lynn Murphy on Chemistry World.

References

1 Zoe Todd et al, Chem. Commun., 2018, DOI: 10.1039/c7cc07748c (This article is open access.)

2 D Ritson and J Sutherland, Nat. Chem., 2012, 4, 895 (DOI: 10.1038/nchem.1467)

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Tech red unmasked

Tech red, an enigmatic technetium compound that has resisted characterisation for half a century, has been identified using chemical detective-work and computer modelling. The molecule’s unusual chemistry may explain why it has proven so difficult to unmask.1


Source: © Bradley Childs
Tech red forms a red, oily liquid upon condensation

Nuclear chemists have been running into a volatile red oxide of technetium – Tc, a radioactive metal – since at least the 1960s.2 ‘Everybody seems to have accidentally made this a couple of times,’ notes Keith Lawler, a postdoctoral researcher at the University of Nevada Las Vegas (UNLV), US. Although the telltale hue makes tech red easy to spot, it has gone unidentified over the intervening decades. Tech red refuses to form crystals, so can’t studied by crystallographic methods, while technetium’s radioactivity is an inherent barrier to researching its compounds. ‘There are only a handful of laboratories who can work with large amounts of technetium, and even fewer who have access to anything other than simple characterisation techniques,’ explains John McCloy, who investigates radioactive materials at Washington State University, US.

Read the full story by Alexander Whiteside on Chemistry World.

 

1 K V Lawler et al, Chem Commun., 2018, DOI: 10.1039/c7cc09191e (This article is free to access until 7 March 2018.)

2 C Rulfs, R Pacer and R Hirsch, J. Inorg. Nucl. Chem., 1967, 29, 681 (DOI: 10.1016/0022-1902(67)80323-3 )

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Molecular box treats chemists to a strained surprise

Introducing pillar[4]pyridinium – the first of a new family of macrocycles

Pillar[4]pyridinium
Source: Grzegorz Sobczak Oksana Danylyuk and Volodymyr Sashuk

Scientists in Poland have made the most compact multiply charged macrocycle to date. Pillar[4]pyridinium is a cyclic tetramer consisting of four pyridyl units with methylene bridges between their nitrogens and para carbons. The quadruply charged molecule has a very symmetrical and incredibly strained structure. It represents a new class of cationic macrocycles, the pillar[n]pyridiniums.

Read the full story by Jennifer Newton on Chemistry World.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Suzuki–Miyaura–hydrogenation targets 3D drugs

Scientists in the UK have unveiled a way to make pharmaceutical molecules with increased 3D characteristics. The single pot Suzuki–Miyaura–hydrogenation reaction results in sp2–sp3 linked pharmaceutically relevant molecules.

Source: Royal Society of Chemistry
A single pot Suzuki–Miyaura-hydrogenation can be used to furnish lead and fragment-like products in good to excellent yields

The number of tetrahedral carbon atoms, or how 3D a molecule is, is one factor that determines the success of a molecule in clinical drug trials. Molecules with a high sp3 fraction are in demand, however current methods to make them suffer drawbacks. The Suzuki–Miyaura reaction is common for the cross-coupling of sp2–sp3 systems, but alkyl boron or alkyl halides are prone to β-elimination and other side reactions, producing mixtures of products.

Read the full story by Suzanne Howson on Chemistry World.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Tactile alternative to colour changes

Many instrument-free analytical methods, such as pH test strips and home pregnancy tests, indicate their results with a colour change. Now scientists in the US have devised a system that outputs a signal you can feel as well as see.

Source: Royal Society of Chemistry
Visual and tactile detection of ATP – gel shapes indicate a positive result.

Read the full story by Jennifer Newton on Chemistry World.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Telescope arrangement puts a twist on organic synthesis

Scientists have adapted a technique more commonly used for making crisps and mixing polymers so that it can perform complex multi-component organic reactions in a single step without the need for a solvent.

Source: Royal Society of Chemistry, Laboratory-scale twin screw extruder

Fine chemicals such as drugs, food additives and fragrances are typically made through complex processes with many intricate reaction steps. These steps can be time-consuming and expensive, and often require solvents that are harmful to the environment. But mechanochemistry, where mechanical forces initiate chemical reactions, could side-step such problems.

Read the full story by Thomas Foley on Chemistry World.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Negative press is not always a bad thing: a novel anode material for sodium-ion batteries

At a product launch in California last week Elon Musk introduced Tesla’s new electric semi-trailer truck. Musk sells a tantalising future: one where an electric fleet replaces vehicles which currently rely on fossil fuels. Central to this fleet are powerful rechargeable batteries. Lithium-ion batteries are favoured for many current applications, such as portable electronic devices and the current offerings of full and hybrid vehicles. In coming years they are projected to be the technology of choice for the large-scale applications mentioned above and for storing power generated from intermittent renewable energy sources.

A limiting factor in the widespread roll-out of lithium batteries is that lithium is an expensive resource with low natural abundance. Sodium offers a possible alternative and has the obvious benefits of being both very cheap, and one of the most abundant elements in the earth’s crust. The electrode materials used in lithium batteries cannot be used to make the sodium variant because the sodium ion is larger (1.02 Å compared to 0.76 Å for lithium) and damages the crystalline materials optimised for lithium.

Researchers Gu, Gu and Yang at Beihang University in Beijing have reported the synthesis and performance of a novel anode material optimised for sodium. The material is a graphene-tetrahydroxybenzoquinone (Na4C6O6) hybrid, and is comprised of a porous graphene-oxide scaffold decorated with nanocrystals of Na4C6O6. Furthermore, X-ray photoelectron spectroscopy (XPS) reveals the homogenous distribution of sodium throughout this conducting material.

The electrochemical performance contrasts with previously reported materials of this type by exhibiting high cyclic stability. The reversible capacity of graphene-Na4C6O6 at a current density of 74.4 mA g-1 is 268 mA h g-1, a value which is steady over 60 cycles. This is competitive with the graphite anode materials found in lithium batteries, which have specific capacities between 200 and 400 mA h g-1. Furthermore the material performs well over a range of current densities, with reversible capacities of 95 – 211 mA h g-1 measured over a range of 3720 – 186 mA g-1.

With this work the authors contribute, at most, a viable candidate for the next rechargeable sodium battery and, at the very least, continued research into sustainable technologies. This ensures that in addressing our current energy challenges we are solving the problem, not delaying it.

To find out more please read:

3D organic Na4C6O6/graphene architecture for fast sodium storage with ultralong cycle life
Jianan Gu, Yue Gua and Shubin Yang
Chem. Commun., 2017, Advance Article
DOI: 10.1039/C7CC08045J, Communication

About the author

Zoë Hearne is a PhD candidate in chemistry at McGill University in Montréal, Canada, under the supervision of Professor Chao-Jun Li. She hails from Canberra, Australia, where she completed her undergraduate degree. Her current research focuses on transition metal catalysis to effect novel transformations, and out of the lab she is an enthusiastic chemistry tutor and science communicator.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Inorganic polystyrene gives old material a new backbone

Synthetic organic polymers and plastics revolutionised the 20th century and helped shape modern-day society. But a new range of materials with useful properties could be in the pipeline thanks to a catalytic method for making ‘inorganic polystyrene’.

Source: Royal Society of Chemistry
B-arylated polyaminoboranes prepared via catalytic dehydropolymerisation

Polystyrene is an important material in today’s society with its uses ranging from a protective packaging material through to disposable cutlery. Its chemical structure, like the majority of other important synthetic polymeric materials, has a backbone of carbon atoms. To discover new materials with useful properties, researchers have tried to replicate these structures using inorganic chains, with silicone materials being a recent example. Now, Ian Manners and his team from the University of Bristol, UK, have made inorganic polymers out of boron and nitrogen.

Read the full story by Jeremy Allen on Chemistry World.

Digg This
Reddit This
Stumble Now!
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)